u-boot/drivers/pci/pcie_dw_common.h
Neil Armstrong dfadb946f6 pci: add common Designware PCIe functions
With the introduction of pcie_dw_rockchip, and need to support the DW PCIe in the
Amlogic AXG & G12 SoCs, most of the DW PCIe helpers would be duplicated.

This introduce a "common" DW PCIe helpers file with common code merged from the
dw_ti and dw_rockchip drivers and adapted to fit with the upcoming dw_meson.

The following changes will switch the dw_ti and dw_rockchip to use these helpers.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Green Wan <green.wan@sifive.com>
[bmeng: remove the blank line at EOF of drivers/pci/pcie_dw_common.c]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-15 10:43:17 +08:00

155 lines
5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) 2021 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* Copyright (c) 2021 Rockchip, Inc.
*
* Copyright (C) 2018 Texas Instruments, Inc
*/
#ifndef PCIE_DW_COMMON_H
#define PCIE_DW_COMMON_H
#define DEFAULT_DBI_ATU_OFFSET (0x3 << 20)
/* PCI DBICS registers */
#define PCIE_LINK_STATUS_REG 0x80
#define PCIE_LINK_STATUS_SPEED_OFF 16
#define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF)
#define PCIE_LINK_STATUS_WIDTH_OFF 20
#define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF)
/*
* iATU Unroll-specific register definitions
* From 4.80 core version the address translation will be made by unroll.
* The registers are offset from atu_base
*/
#define PCIE_ATU_UNR_REGION_CTRL1 0x00
#define PCIE_ATU_UNR_REGION_CTRL2 0x04
#define PCIE_ATU_UNR_LOWER_BASE 0x08
#define PCIE_ATU_UNR_UPPER_BASE 0x0c
#define PCIE_ATU_UNR_LIMIT 0x10
#define PCIE_ATU_UNR_LOWER_TARGET 0x14
#define PCIE_ATU_UNR_UPPER_TARGET 0x18
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
#define PCIE_ATU_TYPE_IO (0x2 << 0)
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
#define PCIE_ATU_ENABLE (0x1 << 31)
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
/* Register address builder */
#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((region) << 9)
/* Parameters for the waiting for iATU enabled routine */
#define LINK_WAIT_MAX_IATU_RETRIES 5
#define LINK_WAIT_IATU_US 10000
/* PCI DBICS registers */
#define PCIE_LINK_STATUS_REG 0x80
#define PCIE_LINK_STATUS_SPEED_OFF 16
#define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF)
#define PCIE_LINK_STATUS_WIDTH_OFF 20
#define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF)
#define PCIE_LINK_CAPABILITY 0x7c
#define PCIE_LINK_CTL_2 0xa0
#define TARGET_LINK_SPEED_MASK 0xf
#define LINK_SPEED_GEN_1 0x1
#define LINK_SPEED_GEN_2 0x2
#define LINK_SPEED_GEN_3 0x3
/* Synopsys-specific PCIe configuration registers */
#define PCIE_PORT_LINK_CONTROL 0x710
#define PORT_LINK_DLL_LINK_EN BIT(5)
#define PORT_LINK_FAST_LINK_MODE BIT(7)
#define PORT_LINK_MODE_MASK GENMASK(21, 16)
#define PORT_LINK_MODE(n) FIELD_PREP(PORT_LINK_MODE_MASK, n)
#define PORT_LINK_MODE_1_LANES PORT_LINK_MODE(0x1)
#define PORT_LINK_MODE_2_LANES PORT_LINK_MODE(0x3)
#define PORT_LINK_MODE_4_LANES PORT_LINK_MODE(0x7)
#define PORT_LINK_MODE_8_LANES PORT_LINK_MODE(0xf)
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
#define PORT_LOGIC_N_FTS_MASK GENMASK(7, 0)
#define PORT_LOGIC_SPEED_CHANGE BIT(17)
#define PORT_LOGIC_LINK_WIDTH_MASK GENMASK(12, 8)
#define PORT_LOGIC_LINK_WIDTH(n) FIELD_PREP(PORT_LOGIC_LINK_WIDTH_MASK, n)
#define PORT_LOGIC_LINK_WIDTH_1_LANES PORT_LOGIC_LINK_WIDTH(0x1)
#define PORT_LOGIC_LINK_WIDTH_2_LANES PORT_LOGIC_LINK_WIDTH(0x2)
#define PORT_LOGIC_LINK_WIDTH_4_LANES PORT_LOGIC_LINK_WIDTH(0x4)
#define PORT_LOGIC_LINK_WIDTH_8_LANES PORT_LOGIC_LINK_WIDTH(0x8)
#define PCIE_MISC_CONTROL_1_OFF 0x8bc
#define PCIE_DBI_RO_WR_EN BIT(0)
/* Parameters for the waiting for iATU enabled routine */
#define LINK_WAIT_MAX_IATU_RETRIES 5
#define LINK_WAIT_IATU 10000
/**
* struct pcie_dw - DW PCIe controller state
*
* @dbi_base: The base address of dbi register space
* @cfg_base: The base address of configuration space
* @atu_base: The base address of ATU space
* @cfg_size: The size of the configuration space which is needed
* as it gets written into the PCIE_ATU_LIMIT register
* @first_busno: This driver supports multiple PCIe controllers.
* first_busno stores the bus number of the PCIe root-port
* number which may vary depending on the PCIe setup
* (PEX switches etc).
* @io: The IO space for EP's BAR
* @mem: The memory space for EP's BAR
* @prefetch: The prefetch space for EP's BAR
*/
struct pcie_dw {
struct udevice *dev;
void __iomem *dbi_base;
void __iomem *cfg_base;
void __iomem *atu_base;
fdt_size_t cfg_size;
int first_busno;
/* IO, MEM & PREFETCH PCI regions */
struct pci_region io;
struct pci_region mem;
struct pci_region prefetch;
};
int pcie_dw_get_link_speed(struct pcie_dw *pci);
int pcie_dw_get_link_width(struct pcie_dw *pci);
int pcie_dw_prog_outbound_atu_unroll(struct pcie_dw *pci, int index, int type, u64 cpu_addr,
u64 pci_addr, u32 size);
int pcie_dw_read_config(const struct udevice *bus, pci_dev_t bdf, uint offset, ulong *valuep,
enum pci_size_t size);
int pcie_dw_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, ulong value,
enum pci_size_t size);
static inline void dw_pcie_dbi_write_enable(struct pcie_dw *pci, bool en)
{
u32 val;
val = readl(pci->dbi_base + PCIE_MISC_CONTROL_1_OFF);
if (en)
val |= PCIE_DBI_RO_WR_EN;
else
val &= ~PCIE_DBI_RO_WR_EN;
writel(val, pci->dbi_base + PCIE_MISC_CONTROL_1_OFF);
}
void pcie_dw_setup_host(struct pcie_dw *pci);
#endif