mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
213fa47dac
The usb mass storage (f_mass_storage.c) uses fixed usb index 0, this causes problem while CDNS3 USB controller index is 1. Modify the API of fsg to pass the controller index. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2777 lines
77 KiB
C
2777 lines
77 KiB
C
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* f_mass_storage.c -- Mass Storage USB Composite Function
|
|
*
|
|
* Copyright (C) 2003-2008 Alan Stern
|
|
* Copyright (C) 2009 Samsung Electronics
|
|
* Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
|
|
* All rights reserved.
|
|
*/
|
|
|
|
/*
|
|
* The Mass Storage Function acts as a USB Mass Storage device,
|
|
* appearing to the host as a disk drive or as a CD-ROM drive. In
|
|
* addition to providing an example of a genuinely useful composite
|
|
* function for a USB device, it also illustrates a technique of
|
|
* double-buffering for increased throughput.
|
|
*
|
|
* Function supports multiple logical units (LUNs). Backing storage
|
|
* for each LUN is provided by a regular file or a block device.
|
|
* Access for each LUN can be limited to read-only. Moreover, the
|
|
* function can indicate that LUN is removable and/or CD-ROM. (The
|
|
* later implies read-only access.)
|
|
*
|
|
* MSF is configured by specifying a fsg_config structure. It has the
|
|
* following fields:
|
|
*
|
|
* nluns Number of LUNs function have (anywhere from 1
|
|
* to FSG_MAX_LUNS which is 8).
|
|
* luns An array of LUN configuration values. This
|
|
* should be filled for each LUN that
|
|
* function will include (ie. for "nluns"
|
|
* LUNs). Each element of the array has
|
|
* the following fields:
|
|
* ->filename The path to the backing file for the LUN.
|
|
* Required if LUN is not marked as
|
|
* removable.
|
|
* ->ro Flag specifying access to the LUN shall be
|
|
* read-only. This is implied if CD-ROM
|
|
* emulation is enabled as well as when
|
|
* it was impossible to open "filename"
|
|
* in R/W mode.
|
|
* ->removable Flag specifying that LUN shall be indicated as
|
|
* being removable.
|
|
* ->cdrom Flag specifying that LUN shall be reported as
|
|
* being a CD-ROM.
|
|
*
|
|
* lun_name_format A printf-like format for names of the LUN
|
|
* devices. This determines how the
|
|
* directory in sysfs will be named.
|
|
* Unless you are using several MSFs in
|
|
* a single gadget (as opposed to single
|
|
* MSF in many configurations) you may
|
|
* leave it as NULL (in which case
|
|
* "lun%d" will be used). In the format
|
|
* you can use "%d" to index LUNs for
|
|
* MSF's with more than one LUN. (Beware
|
|
* that there is only one integer given
|
|
* as an argument for the format and
|
|
* specifying invalid format may cause
|
|
* unspecified behaviour.)
|
|
* thread_name Name of the kernel thread process used by the
|
|
* MSF. You can safely set it to NULL
|
|
* (in which case default "file-storage"
|
|
* will be used).
|
|
*
|
|
* vendor_name
|
|
* product_name
|
|
* release Information used as a reply to INQUIRY
|
|
* request. To use default set to NULL,
|
|
* NULL, 0xffff respectively. The first
|
|
* field should be 8 and the second 16
|
|
* characters or less.
|
|
*
|
|
* can_stall Set to permit function to halt bulk endpoints.
|
|
* Disabled on some USB devices known not
|
|
* to work correctly. You should set it
|
|
* to true.
|
|
*
|
|
* If "removable" is not set for a LUN then a backing file must be
|
|
* specified. If it is set, then NULL filename means the LUN's medium
|
|
* is not loaded (an empty string as "filename" in the fsg_config
|
|
* structure causes error). The CD-ROM emulation includes a single
|
|
* data track and no audio tracks; hence there need be only one
|
|
* backing file per LUN. Note also that the CD-ROM block length is
|
|
* set to 512 rather than the more common value 2048.
|
|
*
|
|
*
|
|
* MSF includes support for module parameters. If gadget using it
|
|
* decides to use it, the following module parameters will be
|
|
* available:
|
|
*
|
|
* file=filename[,filename...]
|
|
* Names of the files or block devices used for
|
|
* backing storage.
|
|
* ro=b[,b...] Default false, boolean for read-only access.
|
|
* removable=b[,b...]
|
|
* Default true, boolean for removable media.
|
|
* cdrom=b[,b...] Default false, boolean for whether to emulate
|
|
* a CD-ROM drive.
|
|
* luns=N Default N = number of filenames, number of
|
|
* LUNs to support.
|
|
* stall Default determined according to the type of
|
|
* USB device controller (usually true),
|
|
* boolean to permit the driver to halt
|
|
* bulk endpoints.
|
|
*
|
|
* The module parameters may be prefixed with some string. You need
|
|
* to consult gadget's documentation or source to verify whether it is
|
|
* using those module parameters and if it does what are the prefixes
|
|
* (look for FSG_MODULE_PARAMETERS() macro usage, what's inside it is
|
|
* the prefix).
|
|
*
|
|
*
|
|
* Requirements are modest; only a bulk-in and a bulk-out endpoint are
|
|
* needed. The memory requirement amounts to two 16K buffers, size
|
|
* configurable by a parameter. Support is included for both
|
|
* full-speed and high-speed operation.
|
|
*
|
|
* Note that the driver is slightly non-portable in that it assumes a
|
|
* single memory/DMA buffer will be useable for bulk-in, bulk-out, and
|
|
* interrupt-in endpoints. With most device controllers this isn't an
|
|
* issue, but there may be some with hardware restrictions that prevent
|
|
* a buffer from being used by more than one endpoint.
|
|
*
|
|
*
|
|
* The pathnames of the backing files and the ro settings are
|
|
* available in the attribute files "file" and "ro" in the lun<n> (or
|
|
* to be more precise in a directory which name comes from
|
|
* "lun_name_format" option!) subdirectory of the gadget's sysfs
|
|
* directory. If the "removable" option is set, writing to these
|
|
* files will simulate ejecting/loading the medium (writing an empty
|
|
* line means eject) and adjusting a write-enable tab. Changes to the
|
|
* ro setting are not allowed when the medium is loaded or if CD-ROM
|
|
* emulation is being used.
|
|
*
|
|
* When a LUN receive an "eject" SCSI request (Start/Stop Unit),
|
|
* if the LUN is removable, the backing file is released to simulate
|
|
* ejection.
|
|
*
|
|
*
|
|
* This function is heavily based on "File-backed Storage Gadget" by
|
|
* Alan Stern which in turn is heavily based on "Gadget Zero" by David
|
|
* Brownell. The driver's SCSI command interface was based on the
|
|
* "Information technology - Small Computer System Interface - 2"
|
|
* document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
|
|
* available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
|
|
* The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
|
|
* was based on the "Universal Serial Bus Mass Storage Class UFI
|
|
* Command Specification" document, Revision 1.0, December 14, 1998,
|
|
* available at
|
|
* <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
|
|
*/
|
|
|
|
/*
|
|
* Driver Design
|
|
*
|
|
* The MSF is fairly straightforward. There is a main kernel
|
|
* thread that handles most of the work. Interrupt routines field
|
|
* callbacks from the controller driver: bulk- and interrupt-request
|
|
* completion notifications, endpoint-0 events, and disconnect events.
|
|
* Completion events are passed to the main thread by wakeup calls. Many
|
|
* ep0 requests are handled at interrupt time, but SetInterface,
|
|
* SetConfiguration, and device reset requests are forwarded to the
|
|
* thread in the form of "exceptions" using SIGUSR1 signals (since they
|
|
* should interrupt any ongoing file I/O operations).
|
|
*
|
|
* The thread's main routine implements the standard command/data/status
|
|
* parts of a SCSI interaction. It and its subroutines are full of tests
|
|
* for pending signals/exceptions -- all this polling is necessary since
|
|
* the kernel has no setjmp/longjmp equivalents. (Maybe this is an
|
|
* indication that the driver really wants to be running in userspace.)
|
|
* An important point is that so long as the thread is alive it keeps an
|
|
* open reference to the backing file. This will prevent unmounting
|
|
* the backing file's underlying filesystem and could cause problems
|
|
* during system shutdown, for example. To prevent such problems, the
|
|
* thread catches INT, TERM, and KILL signals and converts them into
|
|
* an EXIT exception.
|
|
*
|
|
* In normal operation the main thread is started during the gadget's
|
|
* fsg_bind() callback and stopped during fsg_unbind(). But it can
|
|
* also exit when it receives a signal, and there's no point leaving
|
|
* the gadget running when the thread is dead. At of this moment, MSF
|
|
* provides no way to deregister the gadget when thread dies -- maybe
|
|
* a callback functions is needed.
|
|
*
|
|
* To provide maximum throughput, the driver uses a circular pipeline of
|
|
* buffer heads (struct fsg_buffhd). In principle the pipeline can be
|
|
* arbitrarily long; in practice the benefits don't justify having more
|
|
* than 2 stages (i.e., double buffering). But it helps to think of the
|
|
* pipeline as being a long one. Each buffer head contains a bulk-in and
|
|
* a bulk-out request pointer (since the buffer can be used for both
|
|
* output and input -- directions always are given from the host's
|
|
* point of view) as well as a pointer to the buffer and various state
|
|
* variables.
|
|
*
|
|
* Use of the pipeline follows a simple protocol. There is a variable
|
|
* (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
|
|
* At any time that buffer head may still be in use from an earlier
|
|
* request, so each buffer head has a state variable indicating whether
|
|
* it is EMPTY, FULL, or BUSY. Typical use involves waiting for the
|
|
* buffer head to be EMPTY, filling the buffer either by file I/O or by
|
|
* USB I/O (during which the buffer head is BUSY), and marking the buffer
|
|
* head FULL when the I/O is complete. Then the buffer will be emptied
|
|
* (again possibly by USB I/O, during which it is marked BUSY) and
|
|
* finally marked EMPTY again (possibly by a completion routine).
|
|
*
|
|
* A module parameter tells the driver to avoid stalling the bulk
|
|
* endpoints wherever the transport specification allows. This is
|
|
* necessary for some UDCs like the SuperH, which cannot reliably clear a
|
|
* halt on a bulk endpoint. However, under certain circumstances the
|
|
* Bulk-only specification requires a stall. In such cases the driver
|
|
* will halt the endpoint and set a flag indicating that it should clear
|
|
* the halt in software during the next device reset. Hopefully this
|
|
* will permit everything to work correctly. Furthermore, although the
|
|
* specification allows the bulk-out endpoint to halt when the host sends
|
|
* too much data, implementing this would cause an unavoidable race.
|
|
* The driver will always use the "no-stall" approach for OUT transfers.
|
|
*
|
|
* One subtle point concerns sending status-stage responses for ep0
|
|
* requests. Some of these requests, such as device reset, can involve
|
|
* interrupting an ongoing file I/O operation, which might take an
|
|
* arbitrarily long time. During that delay the host might give up on
|
|
* the original ep0 request and issue a new one. When that happens the
|
|
* driver should not notify the host about completion of the original
|
|
* request, as the host will no longer be waiting for it. So the driver
|
|
* assigns to each ep0 request a unique tag, and it keeps track of the
|
|
* tag value of the request associated with a long-running exception
|
|
* (device-reset, interface-change, or configuration-change). When the
|
|
* exception handler is finished, the status-stage response is submitted
|
|
* only if the current ep0 request tag is equal to the exception request
|
|
* tag. Thus only the most recently received ep0 request will get a
|
|
* status-stage response.
|
|
*
|
|
* Warning: This driver source file is too long. It ought to be split up
|
|
* into a header file plus about 3 separate .c files, to handle the details
|
|
* of the Gadget, USB Mass Storage, and SCSI protocols.
|
|
*/
|
|
|
|
/* #define VERBOSE_DEBUG */
|
|
/* #define DUMP_MSGS */
|
|
|
|
#include <config.h>
|
|
#include <hexdump.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <common.h>
|
|
#include <console.h>
|
|
#include <g_dnl.h>
|
|
#include <dm/devres.h>
|
|
#include <linux/bug.h>
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <usb_mass_storage.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/composite.h>
|
|
#include <linux/bitmap.h>
|
|
#include <g_dnl.h>
|
|
|
|
/*------------------------------------------------------------------------*/
|
|
|
|
#define FSG_DRIVER_DESC "Mass Storage Function"
|
|
#define FSG_DRIVER_VERSION "2012/06/5"
|
|
|
|
static const char fsg_string_interface[] = "Mass Storage";
|
|
|
|
#define FSG_NO_INTR_EP 1
|
|
#define FSG_NO_DEVICE_STRINGS 1
|
|
#define FSG_NO_OTG 1
|
|
#define FSG_NO_INTR_EP 1
|
|
|
|
#include "storage_common.c"
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#define GFP_ATOMIC ((gfp_t) 0)
|
|
#define PAGE_CACHE_SHIFT 12
|
|
#define PAGE_CACHE_SIZE (1 << PAGE_CACHE_SHIFT)
|
|
#define kthread_create(...) __builtin_return_address(0)
|
|
#define wait_for_completion(...) do {} while (0)
|
|
|
|
struct kref {int x; };
|
|
struct completion {int x; };
|
|
|
|
struct fsg_dev;
|
|
struct fsg_common;
|
|
|
|
/* Data shared by all the FSG instances. */
|
|
struct fsg_common {
|
|
struct usb_gadget *gadget;
|
|
struct fsg_dev *fsg, *new_fsg;
|
|
|
|
struct usb_ep *ep0; /* Copy of gadget->ep0 */
|
|
struct usb_request *ep0req; /* Copy of cdev->req */
|
|
unsigned int ep0_req_tag;
|
|
|
|
struct fsg_buffhd *next_buffhd_to_fill;
|
|
struct fsg_buffhd *next_buffhd_to_drain;
|
|
struct fsg_buffhd buffhds[FSG_NUM_BUFFERS];
|
|
|
|
int cmnd_size;
|
|
u8 cmnd[MAX_COMMAND_SIZE];
|
|
|
|
unsigned int nluns;
|
|
unsigned int lun;
|
|
struct fsg_lun luns[FSG_MAX_LUNS];
|
|
|
|
unsigned int bulk_out_maxpacket;
|
|
enum fsg_state state; /* For exception handling */
|
|
unsigned int exception_req_tag;
|
|
|
|
enum data_direction data_dir;
|
|
u32 data_size;
|
|
u32 data_size_from_cmnd;
|
|
u32 tag;
|
|
u32 residue;
|
|
u32 usb_amount_left;
|
|
|
|
unsigned int can_stall:1;
|
|
unsigned int free_storage_on_release:1;
|
|
unsigned int phase_error:1;
|
|
unsigned int short_packet_received:1;
|
|
unsigned int bad_lun_okay:1;
|
|
unsigned int running:1;
|
|
|
|
int thread_wakeup_needed;
|
|
struct completion thread_notifier;
|
|
struct task_struct *thread_task;
|
|
|
|
/* Callback functions. */
|
|
const struct fsg_operations *ops;
|
|
/* Gadget's private data. */
|
|
void *private_data;
|
|
|
|
const char *vendor_name; /* 8 characters or less */
|
|
const char *product_name; /* 16 characters or less */
|
|
u16 release;
|
|
|
|
/* Vendor (8 chars), product (16 chars), release (4
|
|
* hexadecimal digits) and NUL byte */
|
|
char inquiry_string[8 + 16 + 4 + 1];
|
|
|
|
struct kref ref;
|
|
};
|
|
|
|
struct fsg_config {
|
|
unsigned nluns;
|
|
struct fsg_lun_config {
|
|
const char *filename;
|
|
char ro;
|
|
char removable;
|
|
char cdrom;
|
|
char nofua;
|
|
} luns[FSG_MAX_LUNS];
|
|
|
|
/* Callback functions. */
|
|
const struct fsg_operations *ops;
|
|
/* Gadget's private data. */
|
|
void *private_data;
|
|
|
|
const char *vendor_name; /* 8 characters or less */
|
|
const char *product_name; /* 16 characters or less */
|
|
|
|
char can_stall;
|
|
};
|
|
|
|
struct fsg_dev {
|
|
struct usb_function function;
|
|
struct usb_gadget *gadget; /* Copy of cdev->gadget */
|
|
struct fsg_common *common;
|
|
|
|
u16 interface_number;
|
|
|
|
unsigned int bulk_in_enabled:1;
|
|
unsigned int bulk_out_enabled:1;
|
|
|
|
unsigned long atomic_bitflags;
|
|
#define IGNORE_BULK_OUT 0
|
|
|
|
struct usb_ep *bulk_in;
|
|
struct usb_ep *bulk_out;
|
|
};
|
|
|
|
|
|
static inline int __fsg_is_set(struct fsg_common *common,
|
|
const char *func, unsigned line)
|
|
{
|
|
if (common->fsg)
|
|
return 1;
|
|
ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
|
|
#ifdef __UBOOT__
|
|
assert_noisy(false);
|
|
#else
|
|
WARN_ON(1);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
|
|
|
|
|
|
static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
|
|
{
|
|
return container_of(f, struct fsg_dev, function);
|
|
}
|
|
|
|
|
|
typedef void (*fsg_routine_t)(struct fsg_dev *);
|
|
|
|
static int exception_in_progress(struct fsg_common *common)
|
|
{
|
|
return common->state > FSG_STATE_IDLE;
|
|
}
|
|
|
|
/* Make bulk-out requests be divisible by the maxpacket size */
|
|
static void set_bulk_out_req_length(struct fsg_common *common,
|
|
struct fsg_buffhd *bh, unsigned int length)
|
|
{
|
|
unsigned int rem;
|
|
|
|
bh->bulk_out_intended_length = length;
|
|
rem = length % common->bulk_out_maxpacket;
|
|
if (rem > 0)
|
|
length += common->bulk_out_maxpacket - rem;
|
|
bh->outreq->length = length;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static struct ums *ums;
|
|
static int ums_count;
|
|
static struct fsg_common *the_fsg_common;
|
|
static unsigned int controller_index;
|
|
|
|
static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
|
|
{
|
|
const char *name;
|
|
|
|
if (ep == fsg->bulk_in)
|
|
name = "bulk-in";
|
|
else if (ep == fsg->bulk_out)
|
|
name = "bulk-out";
|
|
else
|
|
name = ep->name;
|
|
DBG(fsg, "%s set halt\n", name);
|
|
return usb_ep_set_halt(ep);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* These routines may be called in process context or in_irq */
|
|
|
|
/* Caller must hold fsg->lock */
|
|
static void wakeup_thread(struct fsg_common *common)
|
|
{
|
|
common->thread_wakeup_needed = 1;
|
|
}
|
|
|
|
static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
|
|
{
|
|
/* Do nothing if a higher-priority exception is already in progress.
|
|
* If a lower-or-equal priority exception is in progress, preempt it
|
|
* and notify the main thread by sending it a signal. */
|
|
if (common->state <= new_state) {
|
|
common->exception_req_tag = common->ep0_req_tag;
|
|
common->state = new_state;
|
|
common->thread_wakeup_needed = 1;
|
|
}
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int ep0_queue(struct fsg_common *common)
|
|
{
|
|
int rc;
|
|
|
|
rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC);
|
|
common->ep0->driver_data = common;
|
|
if (rc != 0 && rc != -ESHUTDOWN) {
|
|
/* We can't do much more than wait for a reset */
|
|
WARNING(common, "error in submission: %s --> %d\n",
|
|
common->ep0->name, rc);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Bulk and interrupt endpoint completion handlers.
|
|
* These always run in_irq. */
|
|
|
|
static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
struct fsg_common *common = ep->driver_data;
|
|
struct fsg_buffhd *bh = req->context;
|
|
|
|
if (req->status || req->actual != req->length)
|
|
DBG(common, "%s --> %d, %u/%u\n", __func__,
|
|
req->status, req->actual, req->length);
|
|
if (req->status == -ECONNRESET) /* Request was cancelled */
|
|
usb_ep_fifo_flush(ep);
|
|
|
|
/* Hold the lock while we update the request and buffer states */
|
|
bh->inreq_busy = 0;
|
|
bh->state = BUF_STATE_EMPTY;
|
|
wakeup_thread(common);
|
|
}
|
|
|
|
static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
struct fsg_common *common = ep->driver_data;
|
|
struct fsg_buffhd *bh = req->context;
|
|
|
|
dump_msg(common, "bulk-out", req->buf, req->actual);
|
|
if (req->status || req->actual != bh->bulk_out_intended_length)
|
|
DBG(common, "%s --> %d, %u/%u\n", __func__,
|
|
req->status, req->actual,
|
|
bh->bulk_out_intended_length);
|
|
if (req->status == -ECONNRESET) /* Request was cancelled */
|
|
usb_ep_fifo_flush(ep);
|
|
|
|
/* Hold the lock while we update the request and buffer states */
|
|
bh->outreq_busy = 0;
|
|
bh->state = BUF_STATE_FULL;
|
|
wakeup_thread(common);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Ep0 class-specific handlers. These always run in_irq. */
|
|
|
|
static int fsg_setup(struct usb_function *f,
|
|
const struct usb_ctrlrequest *ctrl)
|
|
{
|
|
struct fsg_dev *fsg = fsg_from_func(f);
|
|
struct usb_request *req = fsg->common->ep0req;
|
|
u16 w_index = get_unaligned_le16(&ctrl->wIndex);
|
|
u16 w_value = get_unaligned_le16(&ctrl->wValue);
|
|
u16 w_length = get_unaligned_le16(&ctrl->wLength);
|
|
|
|
if (!fsg_is_set(fsg->common))
|
|
return -EOPNOTSUPP;
|
|
|
|
switch (ctrl->bRequest) {
|
|
|
|
case USB_BULK_RESET_REQUEST:
|
|
if (ctrl->bRequestType !=
|
|
(USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
|
|
break;
|
|
if (w_index != fsg->interface_number || w_value != 0)
|
|
return -EDOM;
|
|
|
|
/* Raise an exception to stop the current operation
|
|
* and reinitialize our state. */
|
|
DBG(fsg, "bulk reset request\n");
|
|
raise_exception(fsg->common, FSG_STATE_RESET);
|
|
return DELAYED_STATUS;
|
|
|
|
case USB_BULK_GET_MAX_LUN_REQUEST:
|
|
if (ctrl->bRequestType !=
|
|
(USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
|
|
break;
|
|
if (w_index != fsg->interface_number || w_value != 0)
|
|
return -EDOM;
|
|
VDBG(fsg, "get max LUN\n");
|
|
*(u8 *) req->buf = fsg->common->nluns - 1;
|
|
|
|
/* Respond with data/status */
|
|
req->length = min((u16)1, w_length);
|
|
return ep0_queue(fsg->common);
|
|
}
|
|
|
|
VDBG(fsg,
|
|
"unknown class-specific control req "
|
|
"%02x.%02x v%04x i%04x l%u\n",
|
|
ctrl->bRequestType, ctrl->bRequest,
|
|
get_unaligned_le16(&ctrl->wValue), w_index, w_length);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* All the following routines run in process context */
|
|
|
|
/* Use this for bulk or interrupt transfers, not ep0 */
|
|
static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
|
|
struct usb_request *req, int *pbusy,
|
|
enum fsg_buffer_state *state)
|
|
{
|
|
int rc;
|
|
|
|
if (ep == fsg->bulk_in)
|
|
dump_msg(fsg, "bulk-in", req->buf, req->length);
|
|
|
|
*pbusy = 1;
|
|
*state = BUF_STATE_BUSY;
|
|
rc = usb_ep_queue(ep, req, GFP_KERNEL);
|
|
if (rc != 0) {
|
|
*pbusy = 0;
|
|
*state = BUF_STATE_EMPTY;
|
|
|
|
/* We can't do much more than wait for a reset */
|
|
|
|
/* Note: currently the net2280 driver fails zero-length
|
|
* submissions if DMA is enabled. */
|
|
if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
|
|
req->length == 0))
|
|
WARNING(fsg, "error in submission: %s --> %d\n",
|
|
ep->name, rc);
|
|
}
|
|
}
|
|
|
|
#define START_TRANSFER_OR(common, ep_name, req, pbusy, state) \
|
|
if (fsg_is_set(common)) \
|
|
start_transfer((common)->fsg, (common)->fsg->ep_name, \
|
|
req, pbusy, state); \
|
|
else
|
|
|
|
#define START_TRANSFER(common, ep_name, req, pbusy, state) \
|
|
START_TRANSFER_OR(common, ep_name, req, pbusy, state) (void)0
|
|
|
|
static void busy_indicator(void)
|
|
{
|
|
static int state;
|
|
|
|
switch (state) {
|
|
case 0:
|
|
puts("\r|"); break;
|
|
case 1:
|
|
puts("\r/"); break;
|
|
case 2:
|
|
puts("\r-"); break;
|
|
case 3:
|
|
puts("\r\\"); break;
|
|
case 4:
|
|
puts("\r|"); break;
|
|
case 5:
|
|
puts("\r/"); break;
|
|
case 6:
|
|
puts("\r-"); break;
|
|
case 7:
|
|
puts("\r\\"); break;
|
|
default:
|
|
state = 0;
|
|
}
|
|
if (state++ == 8)
|
|
state = 0;
|
|
}
|
|
|
|
static int sleep_thread(struct fsg_common *common)
|
|
{
|
|
int rc = 0;
|
|
int i = 0, k = 0;
|
|
|
|
/* Wait until a signal arrives or we are woken up */
|
|
for (;;) {
|
|
if (common->thread_wakeup_needed)
|
|
break;
|
|
|
|
if (++i == 20000) {
|
|
busy_indicator();
|
|
i = 0;
|
|
k++;
|
|
}
|
|
|
|
if (k == 10) {
|
|
/* Handle CTRL+C */
|
|
if (ctrlc())
|
|
return -EPIPE;
|
|
|
|
/* Check cable connection */
|
|
if (!g_dnl_board_usb_cable_connected())
|
|
return -EIO;
|
|
|
|
k = 0;
|
|
}
|
|
|
|
usb_gadget_handle_interrupts(controller_index);
|
|
}
|
|
common->thread_wakeup_needed = 0;
|
|
return rc;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int do_read(struct fsg_common *common)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
u32 lba;
|
|
struct fsg_buffhd *bh;
|
|
int rc;
|
|
u32 amount_left;
|
|
loff_t file_offset;
|
|
unsigned int amount;
|
|
unsigned int partial_page;
|
|
ssize_t nread;
|
|
|
|
/* Get the starting Logical Block Address and check that it's
|
|
* not too big */
|
|
if (common->cmnd[0] == SC_READ_6)
|
|
lba = get_unaligned_be24(&common->cmnd[1]);
|
|
else {
|
|
lba = get_unaligned_be32(&common->cmnd[2]);
|
|
|
|
/* We allow DPO (Disable Page Out = don't save data in the
|
|
* cache) and FUA (Force Unit Access = don't read from the
|
|
* cache), but we don't implement them. */
|
|
if ((common->cmnd[1] & ~0x18) != 0) {
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
if (lba >= curlun->num_sectors) {
|
|
curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
return -EINVAL;
|
|
}
|
|
file_offset = ((loff_t) lba) << 9;
|
|
|
|
/* Carry out the file reads */
|
|
amount_left = common->data_size_from_cmnd;
|
|
if (unlikely(amount_left == 0))
|
|
return -EIO; /* No default reply */
|
|
|
|
for (;;) {
|
|
|
|
/* Figure out how much we need to read:
|
|
* Try to read the remaining amount.
|
|
* But don't read more than the buffer size.
|
|
* And don't try to read past the end of the file.
|
|
* Finally, if we're not at a page boundary, don't read past
|
|
* the next page.
|
|
* If this means reading 0 then we were asked to read past
|
|
* the end of file. */
|
|
amount = min(amount_left, FSG_BUFLEN);
|
|
partial_page = file_offset & (PAGE_CACHE_SIZE - 1);
|
|
if (partial_page > 0)
|
|
amount = min(amount, (unsigned int) PAGE_CACHE_SIZE -
|
|
partial_page);
|
|
|
|
/* Wait for the next buffer to become available */
|
|
bh = common->next_buffhd_to_fill;
|
|
while (bh->state != BUF_STATE_EMPTY) {
|
|
rc = sleep_thread(common);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
/* If we were asked to read past the end of file,
|
|
* end with an empty buffer. */
|
|
if (amount == 0) {
|
|
curlun->sense_data =
|
|
SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
curlun->info_valid = 1;
|
|
bh->inreq->length = 0;
|
|
bh->state = BUF_STATE_FULL;
|
|
break;
|
|
}
|
|
|
|
/* Perform the read */
|
|
rc = ums[common->lun].read_sector(&ums[common->lun],
|
|
file_offset / SECTOR_SIZE,
|
|
amount / SECTOR_SIZE,
|
|
(char __user *)bh->buf);
|
|
if (!rc)
|
|
return -EIO;
|
|
|
|
nread = rc * SECTOR_SIZE;
|
|
|
|
VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
|
|
(unsigned long long) file_offset,
|
|
(int) nread);
|
|
|
|
if (nread < 0) {
|
|
LDBG(curlun, "error in file read: %d\n",
|
|
(int) nread);
|
|
nread = 0;
|
|
} else if (nread < amount) {
|
|
LDBG(curlun, "partial file read: %d/%u\n",
|
|
(int) nread, amount);
|
|
nread -= (nread & 511); /* Round down to a block */
|
|
}
|
|
file_offset += nread;
|
|
amount_left -= nread;
|
|
common->residue -= nread;
|
|
bh->inreq->length = nread;
|
|
bh->state = BUF_STATE_FULL;
|
|
|
|
/* If an error occurred, report it and its position */
|
|
if (nread < amount) {
|
|
curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
|
|
curlun->info_valid = 1;
|
|
break;
|
|
}
|
|
|
|
if (amount_left == 0)
|
|
break; /* No more left to read */
|
|
|
|
/* Send this buffer and go read some more */
|
|
bh->inreq->zero = 0;
|
|
START_TRANSFER_OR(common, bulk_in, bh->inreq,
|
|
&bh->inreq_busy, &bh->state)
|
|
/* Don't know what to do if
|
|
* common->fsg is NULL */
|
|
return -EIO;
|
|
common->next_buffhd_to_fill = bh->next;
|
|
}
|
|
|
|
return -EIO; /* No default reply */
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int do_write(struct fsg_common *common)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
u32 lba;
|
|
struct fsg_buffhd *bh;
|
|
int get_some_more;
|
|
u32 amount_left_to_req, amount_left_to_write;
|
|
loff_t usb_offset, file_offset;
|
|
unsigned int amount;
|
|
unsigned int partial_page;
|
|
ssize_t nwritten;
|
|
int rc;
|
|
|
|
if (curlun->ro) {
|
|
curlun->sense_data = SS_WRITE_PROTECTED;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get the starting Logical Block Address and check that it's
|
|
* not too big */
|
|
if (common->cmnd[0] == SC_WRITE_6)
|
|
lba = get_unaligned_be24(&common->cmnd[1]);
|
|
else {
|
|
lba = get_unaligned_be32(&common->cmnd[2]);
|
|
|
|
/* We allow DPO (Disable Page Out = don't save data in the
|
|
* cache) and FUA (Force Unit Access = write directly to the
|
|
* medium). We don't implement DPO; we implement FUA by
|
|
* performing synchronous output. */
|
|
if (common->cmnd[1] & ~0x18) {
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
if (lba >= curlun->num_sectors) {
|
|
curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Carry out the file writes */
|
|
get_some_more = 1;
|
|
file_offset = usb_offset = ((loff_t) lba) << 9;
|
|
amount_left_to_req = common->data_size_from_cmnd;
|
|
amount_left_to_write = common->data_size_from_cmnd;
|
|
|
|
while (amount_left_to_write > 0) {
|
|
|
|
/* Queue a request for more data from the host */
|
|
bh = common->next_buffhd_to_fill;
|
|
if (bh->state == BUF_STATE_EMPTY && get_some_more) {
|
|
|
|
/* Figure out how much we want to get:
|
|
* Try to get the remaining amount.
|
|
* But don't get more than the buffer size.
|
|
* And don't try to go past the end of the file.
|
|
* If we're not at a page boundary,
|
|
* don't go past the next page.
|
|
* If this means getting 0, then we were asked
|
|
* to write past the end of file.
|
|
* Finally, round down to a block boundary. */
|
|
amount = min(amount_left_to_req, FSG_BUFLEN);
|
|
partial_page = usb_offset & (PAGE_CACHE_SIZE - 1);
|
|
if (partial_page > 0)
|
|
amount = min(amount,
|
|
(unsigned int) PAGE_CACHE_SIZE - partial_page);
|
|
|
|
if (amount == 0) {
|
|
get_some_more = 0;
|
|
curlun->sense_data =
|
|
SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
curlun->info_valid = 1;
|
|
continue;
|
|
}
|
|
amount -= (amount & 511);
|
|
if (amount == 0) {
|
|
|
|
/* Why were we were asked to transfer a
|
|
* partial block? */
|
|
get_some_more = 0;
|
|
continue;
|
|
}
|
|
|
|
/* Get the next buffer */
|
|
usb_offset += amount;
|
|
common->usb_amount_left -= amount;
|
|
amount_left_to_req -= amount;
|
|
if (amount_left_to_req == 0)
|
|
get_some_more = 0;
|
|
|
|
/* amount is always divisible by 512, hence by
|
|
* the bulk-out maxpacket size */
|
|
bh->outreq->length = amount;
|
|
bh->bulk_out_intended_length = amount;
|
|
bh->outreq->short_not_ok = 1;
|
|
START_TRANSFER_OR(common, bulk_out, bh->outreq,
|
|
&bh->outreq_busy, &bh->state)
|
|
/* Don't know what to do if
|
|
* common->fsg is NULL */
|
|
return -EIO;
|
|
common->next_buffhd_to_fill = bh->next;
|
|
continue;
|
|
}
|
|
|
|
/* Write the received data to the backing file */
|
|
bh = common->next_buffhd_to_drain;
|
|
if (bh->state == BUF_STATE_EMPTY && !get_some_more)
|
|
break; /* We stopped early */
|
|
if (bh->state == BUF_STATE_FULL) {
|
|
common->next_buffhd_to_drain = bh->next;
|
|
bh->state = BUF_STATE_EMPTY;
|
|
|
|
/* Did something go wrong with the transfer? */
|
|
if (bh->outreq->status != 0) {
|
|
curlun->sense_data = SS_COMMUNICATION_FAILURE;
|
|
curlun->info_valid = 1;
|
|
break;
|
|
}
|
|
|
|
amount = bh->outreq->actual;
|
|
|
|
/* Perform the write */
|
|
rc = ums[common->lun].write_sector(&ums[common->lun],
|
|
file_offset / SECTOR_SIZE,
|
|
amount / SECTOR_SIZE,
|
|
(char __user *)bh->buf);
|
|
if (!rc)
|
|
return -EIO;
|
|
nwritten = rc * SECTOR_SIZE;
|
|
|
|
VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
|
|
(unsigned long long) file_offset,
|
|
(int) nwritten);
|
|
|
|
if (nwritten < 0) {
|
|
LDBG(curlun, "error in file write: %d\n",
|
|
(int) nwritten);
|
|
nwritten = 0;
|
|
} else if (nwritten < amount) {
|
|
LDBG(curlun, "partial file write: %d/%u\n",
|
|
(int) nwritten, amount);
|
|
nwritten -= (nwritten & 511);
|
|
/* Round down to a block */
|
|
}
|
|
file_offset += nwritten;
|
|
amount_left_to_write -= nwritten;
|
|
common->residue -= nwritten;
|
|
|
|
/* If an error occurred, report it and its position */
|
|
if (nwritten < amount) {
|
|
printf("nwritten:%zd amount:%u\n", nwritten,
|
|
amount);
|
|
curlun->sense_data = SS_WRITE_ERROR;
|
|
curlun->info_valid = 1;
|
|
break;
|
|
}
|
|
|
|
/* Did the host decide to stop early? */
|
|
if (bh->outreq->actual != bh->outreq->length) {
|
|
common->short_packet_received = 1;
|
|
break;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/* Wait for something to happen */
|
|
rc = sleep_thread(common);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
return -EIO; /* No default reply */
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int do_synchronize_cache(struct fsg_common *common)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int do_verify(struct fsg_common *common)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
u32 lba;
|
|
u32 verification_length;
|
|
struct fsg_buffhd *bh = common->next_buffhd_to_fill;
|
|
loff_t file_offset;
|
|
u32 amount_left;
|
|
unsigned int amount;
|
|
ssize_t nread;
|
|
int rc;
|
|
|
|
/* Get the starting Logical Block Address and check that it's
|
|
* not too big */
|
|
lba = get_unaligned_be32(&common->cmnd[2]);
|
|
if (lba >= curlun->num_sectors) {
|
|
curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* We allow DPO (Disable Page Out = don't save data in the
|
|
* cache) but we don't implement it. */
|
|
if (common->cmnd[1] & ~0x10) {
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
|
|
verification_length = get_unaligned_be16(&common->cmnd[7]);
|
|
if (unlikely(verification_length == 0))
|
|
return -EIO; /* No default reply */
|
|
|
|
/* Prepare to carry out the file verify */
|
|
amount_left = verification_length << 9;
|
|
file_offset = ((loff_t) lba) << 9;
|
|
|
|
/* Write out all the dirty buffers before invalidating them */
|
|
|
|
/* Just try to read the requested blocks */
|
|
while (amount_left > 0) {
|
|
|
|
/* Figure out how much we need to read:
|
|
* Try to read the remaining amount, but not more than
|
|
* the buffer size.
|
|
* And don't try to read past the end of the file.
|
|
* If this means reading 0 then we were asked to read
|
|
* past the end of file. */
|
|
amount = min(amount_left, FSG_BUFLEN);
|
|
if (amount == 0) {
|
|
curlun->sense_data =
|
|
SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
curlun->info_valid = 1;
|
|
break;
|
|
}
|
|
|
|
/* Perform the read */
|
|
rc = ums[common->lun].read_sector(&ums[common->lun],
|
|
file_offset / SECTOR_SIZE,
|
|
amount / SECTOR_SIZE,
|
|
(char __user *)bh->buf);
|
|
if (!rc)
|
|
return -EIO;
|
|
nread = rc * SECTOR_SIZE;
|
|
|
|
VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
|
|
(unsigned long long) file_offset,
|
|
(int) nread);
|
|
if (nread < 0) {
|
|
LDBG(curlun, "error in file verify: %d\n",
|
|
(int) nread);
|
|
nread = 0;
|
|
} else if (nread < amount) {
|
|
LDBG(curlun, "partial file verify: %d/%u\n",
|
|
(int) nread, amount);
|
|
nread -= (nread & 511); /* Round down to a sector */
|
|
}
|
|
if (nread == 0) {
|
|
curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
|
|
curlun->info_valid = 1;
|
|
break;
|
|
}
|
|
file_offset += nread;
|
|
amount_left -= nread;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
static const char vendor_id[] = "Linux ";
|
|
u8 *buf = (u8 *) bh->buf;
|
|
|
|
if (!curlun) { /* Unsupported LUNs are okay */
|
|
common->bad_lun_okay = 1;
|
|
memset(buf, 0, 36);
|
|
buf[0] = 0x7f; /* Unsupported, no device-type */
|
|
buf[4] = 31; /* Additional length */
|
|
return 36;
|
|
}
|
|
|
|
memset(buf, 0, 8);
|
|
buf[0] = TYPE_DISK;
|
|
buf[1] = curlun->removable ? 0x80 : 0;
|
|
buf[2] = 2; /* ANSI SCSI level 2 */
|
|
buf[3] = 2; /* SCSI-2 INQUIRY data format */
|
|
buf[4] = 31; /* Additional length */
|
|
/* No special options */
|
|
sprintf((char *) (buf + 8), "%-8s%-16s%04x", (char*) vendor_id ,
|
|
ums[common->lun].name, (u16) 0xffff);
|
|
|
|
return 36;
|
|
}
|
|
|
|
|
|
static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
u8 *buf = (u8 *) bh->buf;
|
|
u32 sd, sdinfo;
|
|
int valid;
|
|
|
|
/*
|
|
* From the SCSI-2 spec., section 7.9 (Unit attention condition):
|
|
*
|
|
* If a REQUEST SENSE command is received from an initiator
|
|
* with a pending unit attention condition (before the target
|
|
* generates the contingent allegiance condition), then the
|
|
* target shall either:
|
|
* a) report any pending sense data and preserve the unit
|
|
* attention condition on the logical unit, or,
|
|
* b) report the unit attention condition, may discard any
|
|
* pending sense data, and clear the unit attention
|
|
* condition on the logical unit for that initiator.
|
|
*
|
|
* FSG normally uses option a); enable this code to use option b).
|
|
*/
|
|
#if 0
|
|
if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
|
|
curlun->sense_data = curlun->unit_attention_data;
|
|
curlun->unit_attention_data = SS_NO_SENSE;
|
|
}
|
|
#endif
|
|
|
|
if (!curlun) { /* Unsupported LUNs are okay */
|
|
common->bad_lun_okay = 1;
|
|
sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
|
|
sdinfo = 0;
|
|
valid = 0;
|
|
} else {
|
|
sd = curlun->sense_data;
|
|
valid = curlun->info_valid << 7;
|
|
curlun->sense_data = SS_NO_SENSE;
|
|
curlun->info_valid = 0;
|
|
}
|
|
|
|
memset(buf, 0, 18);
|
|
buf[0] = valid | 0x70; /* Valid, current error */
|
|
buf[2] = SK(sd);
|
|
put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */
|
|
buf[7] = 18 - 8; /* Additional sense length */
|
|
buf[12] = ASC(sd);
|
|
buf[13] = ASCQ(sd);
|
|
return 18;
|
|
}
|
|
|
|
static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
u32 lba = get_unaligned_be32(&common->cmnd[2]);
|
|
int pmi = common->cmnd[8];
|
|
u8 *buf = (u8 *) bh->buf;
|
|
|
|
/* Check the PMI and LBA fields */
|
|
if (pmi > 1 || (pmi == 0 && lba != 0)) {
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
|
|
put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
|
|
/* Max logical block */
|
|
put_unaligned_be32(512, &buf[4]); /* Block length */
|
|
return 8;
|
|
}
|
|
|
|
static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
int msf = common->cmnd[1] & 0x02;
|
|
u32 lba = get_unaligned_be32(&common->cmnd[2]);
|
|
u8 *buf = (u8 *) bh->buf;
|
|
|
|
if (common->cmnd[1] & ~0x02) { /* Mask away MSF */
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
if (lba >= curlun->num_sectors) {
|
|
curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(buf, 0, 8);
|
|
buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */
|
|
store_cdrom_address(&buf[4], msf, lba);
|
|
return 8;
|
|
}
|
|
|
|
|
|
static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
int msf = common->cmnd[1] & 0x02;
|
|
int start_track = common->cmnd[6];
|
|
u8 *buf = (u8 *) bh->buf;
|
|
|
|
if ((common->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */
|
|
start_track > 1) {
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(buf, 0, 20);
|
|
buf[1] = (20-2); /* TOC data length */
|
|
buf[2] = 1; /* First track number */
|
|
buf[3] = 1; /* Last track number */
|
|
buf[5] = 0x16; /* Data track, copying allowed */
|
|
buf[6] = 0x01; /* Only track is number 1 */
|
|
store_cdrom_address(&buf[8], msf, 0);
|
|
|
|
buf[13] = 0x16; /* Lead-out track is data */
|
|
buf[14] = 0xAA; /* Lead-out track number */
|
|
store_cdrom_address(&buf[16], msf, curlun->num_sectors);
|
|
|
|
return 20;
|
|
}
|
|
|
|
static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
int mscmnd = common->cmnd[0];
|
|
u8 *buf = (u8 *) bh->buf;
|
|
u8 *buf0 = buf;
|
|
int pc, page_code;
|
|
int changeable_values, all_pages;
|
|
int valid_page = 0;
|
|
int len, limit;
|
|
|
|
if ((common->cmnd[1] & ~0x08) != 0) { /* Mask away DBD */
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
pc = common->cmnd[2] >> 6;
|
|
page_code = common->cmnd[2] & 0x3f;
|
|
if (pc == 3) {
|
|
curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
|
|
return -EINVAL;
|
|
}
|
|
changeable_values = (pc == 1);
|
|
all_pages = (page_code == 0x3f);
|
|
|
|
/* Write the mode parameter header. Fixed values are: default
|
|
* medium type, no cache control (DPOFUA), and no block descriptors.
|
|
* The only variable value is the WriteProtect bit. We will fill in
|
|
* the mode data length later. */
|
|
memset(buf, 0, 8);
|
|
if (mscmnd == SC_MODE_SENSE_6) {
|
|
buf[2] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */
|
|
buf += 4;
|
|
limit = 255;
|
|
} else { /* SC_MODE_SENSE_10 */
|
|
buf[3] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */
|
|
buf += 8;
|
|
limit = 65535; /* Should really be FSG_BUFLEN */
|
|
}
|
|
|
|
/* No block descriptors */
|
|
|
|
/* The mode pages, in numerical order. The only page we support
|
|
* is the Caching page. */
|
|
if (page_code == 0x08 || all_pages) {
|
|
valid_page = 1;
|
|
buf[0] = 0x08; /* Page code */
|
|
buf[1] = 10; /* Page length */
|
|
memset(buf+2, 0, 10); /* None of the fields are changeable */
|
|
|
|
if (!changeable_values) {
|
|
buf[2] = 0x04; /* Write cache enable, */
|
|
/* Read cache not disabled */
|
|
/* No cache retention priorities */
|
|
put_unaligned_be16(0xffff, &buf[4]);
|
|
/* Don't disable prefetch */
|
|
/* Minimum prefetch = 0 */
|
|
put_unaligned_be16(0xffff, &buf[8]);
|
|
/* Maximum prefetch */
|
|
put_unaligned_be16(0xffff, &buf[10]);
|
|
/* Maximum prefetch ceiling */
|
|
}
|
|
buf += 12;
|
|
}
|
|
|
|
/* Check that a valid page was requested and the mode data length
|
|
* isn't too long. */
|
|
len = buf - buf0;
|
|
if (!valid_page || len > limit) {
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Store the mode data length */
|
|
if (mscmnd == SC_MODE_SENSE_6)
|
|
buf0[0] = len - 1;
|
|
else
|
|
put_unaligned_be16(len - 2, buf0);
|
|
return len;
|
|
}
|
|
|
|
|
|
static int do_start_stop(struct fsg_common *common)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
|
|
if (!curlun) {
|
|
return -EINVAL;
|
|
} else if (!curlun->removable) {
|
|
curlun->sense_data = SS_INVALID_COMMAND;
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int do_prevent_allow(struct fsg_common *common)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
int prevent;
|
|
|
|
if (!curlun->removable) {
|
|
curlun->sense_data = SS_INVALID_COMMAND;
|
|
return -EINVAL;
|
|
}
|
|
|
|
prevent = common->cmnd[4] & 0x01;
|
|
if ((common->cmnd[4] & ~0x01) != 0) { /* Mask away Prevent */
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (curlun->prevent_medium_removal && !prevent)
|
|
fsg_lun_fsync_sub(curlun);
|
|
curlun->prevent_medium_removal = prevent;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int do_read_format_capacities(struct fsg_common *common,
|
|
struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
u8 *buf = (u8 *) bh->buf;
|
|
|
|
buf[0] = buf[1] = buf[2] = 0;
|
|
buf[3] = 8; /* Only the Current/Maximum Capacity Descriptor */
|
|
buf += 4;
|
|
|
|
put_unaligned_be32(curlun->num_sectors, &buf[0]);
|
|
/* Number of blocks */
|
|
put_unaligned_be32(512, &buf[4]); /* Block length */
|
|
buf[4] = 0x02; /* Current capacity */
|
|
return 12;
|
|
}
|
|
|
|
|
|
static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
|
|
/* We don't support MODE SELECT */
|
|
if (curlun)
|
|
curlun->sense_data = SS_INVALID_COMMAND;
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
|
|
{
|
|
int rc;
|
|
|
|
rc = fsg_set_halt(fsg, fsg->bulk_in);
|
|
if (rc == -EAGAIN)
|
|
VDBG(fsg, "delayed bulk-in endpoint halt\n");
|
|
while (rc != 0) {
|
|
if (rc != -EAGAIN) {
|
|
WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
|
|
rc = 0;
|
|
break;
|
|
}
|
|
|
|
rc = usb_ep_set_halt(fsg->bulk_in);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
|
|
{
|
|
int rc;
|
|
|
|
DBG(fsg, "bulk-in set wedge\n");
|
|
rc = 0; /* usb_ep_set_wedge(fsg->bulk_in); */
|
|
if (rc == -EAGAIN)
|
|
VDBG(fsg, "delayed bulk-in endpoint wedge\n");
|
|
while (rc != 0) {
|
|
if (rc != -EAGAIN) {
|
|
WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
|
|
rc = 0;
|
|
break;
|
|
}
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int pad_with_zeros(struct fsg_dev *fsg)
|
|
{
|
|
struct fsg_buffhd *bh = fsg->common->next_buffhd_to_fill;
|
|
u32 nkeep = bh->inreq->length;
|
|
u32 nsend;
|
|
int rc;
|
|
|
|
bh->state = BUF_STATE_EMPTY; /* For the first iteration */
|
|
fsg->common->usb_amount_left = nkeep + fsg->common->residue;
|
|
while (fsg->common->usb_amount_left > 0) {
|
|
|
|
/* Wait for the next buffer to be free */
|
|
while (bh->state != BUF_STATE_EMPTY) {
|
|
rc = sleep_thread(fsg->common);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
nsend = min(fsg->common->usb_amount_left, FSG_BUFLEN);
|
|
memset(bh->buf + nkeep, 0, nsend - nkeep);
|
|
bh->inreq->length = nsend;
|
|
bh->inreq->zero = 0;
|
|
start_transfer(fsg, fsg->bulk_in, bh->inreq,
|
|
&bh->inreq_busy, &bh->state);
|
|
bh = fsg->common->next_buffhd_to_fill = bh->next;
|
|
fsg->common->usb_amount_left -= nsend;
|
|
nkeep = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int throw_away_data(struct fsg_common *common)
|
|
{
|
|
struct fsg_buffhd *bh;
|
|
u32 amount;
|
|
int rc;
|
|
|
|
for (bh = common->next_buffhd_to_drain;
|
|
bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0;
|
|
bh = common->next_buffhd_to_drain) {
|
|
|
|
/* Throw away the data in a filled buffer */
|
|
if (bh->state == BUF_STATE_FULL) {
|
|
bh->state = BUF_STATE_EMPTY;
|
|
common->next_buffhd_to_drain = bh->next;
|
|
|
|
/* A short packet or an error ends everything */
|
|
if (bh->outreq->actual != bh->outreq->length ||
|
|
bh->outreq->status != 0) {
|
|
raise_exception(common,
|
|
FSG_STATE_ABORT_BULK_OUT);
|
|
return -EINTR;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/* Try to submit another request if we need one */
|
|
bh = common->next_buffhd_to_fill;
|
|
if (bh->state == BUF_STATE_EMPTY
|
|
&& common->usb_amount_left > 0) {
|
|
amount = min(common->usb_amount_left, FSG_BUFLEN);
|
|
|
|
/* amount is always divisible by 512, hence by
|
|
* the bulk-out maxpacket size */
|
|
bh->outreq->length = amount;
|
|
bh->bulk_out_intended_length = amount;
|
|
bh->outreq->short_not_ok = 1;
|
|
START_TRANSFER_OR(common, bulk_out, bh->outreq,
|
|
&bh->outreq_busy, &bh->state)
|
|
/* Don't know what to do if
|
|
* common->fsg is NULL */
|
|
return -EIO;
|
|
common->next_buffhd_to_fill = bh->next;
|
|
common->usb_amount_left -= amount;
|
|
continue;
|
|
}
|
|
|
|
/* Otherwise wait for something to happen */
|
|
rc = sleep_thread(common);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int finish_reply(struct fsg_common *common)
|
|
{
|
|
struct fsg_buffhd *bh = common->next_buffhd_to_fill;
|
|
int rc = 0;
|
|
|
|
switch (common->data_dir) {
|
|
case DATA_DIR_NONE:
|
|
break; /* Nothing to send */
|
|
|
|
/* If we don't know whether the host wants to read or write,
|
|
* this must be CB or CBI with an unknown command. We mustn't
|
|
* try to send or receive any data. So stall both bulk pipes
|
|
* if we can and wait for a reset. */
|
|
case DATA_DIR_UNKNOWN:
|
|
if (!common->can_stall) {
|
|
/* Nothing */
|
|
} else if (fsg_is_set(common)) {
|
|
fsg_set_halt(common->fsg, common->fsg->bulk_out);
|
|
rc = halt_bulk_in_endpoint(common->fsg);
|
|
} else {
|
|
/* Don't know what to do if common->fsg is NULL */
|
|
rc = -EIO;
|
|
}
|
|
break;
|
|
|
|
/* All but the last buffer of data must have already been sent */
|
|
case DATA_DIR_TO_HOST:
|
|
if (common->data_size == 0) {
|
|
/* Nothing to send */
|
|
|
|
/* If there's no residue, simply send the last buffer */
|
|
} else if (common->residue == 0) {
|
|
bh->inreq->zero = 0;
|
|
START_TRANSFER_OR(common, bulk_in, bh->inreq,
|
|
&bh->inreq_busy, &bh->state)
|
|
return -EIO;
|
|
common->next_buffhd_to_fill = bh->next;
|
|
|
|
/* For Bulk-only, if we're allowed to stall then send the
|
|
* short packet and halt the bulk-in endpoint. If we can't
|
|
* stall, pad out the remaining data with 0's. */
|
|
} else if (common->can_stall) {
|
|
bh->inreq->zero = 1;
|
|
START_TRANSFER_OR(common, bulk_in, bh->inreq,
|
|
&bh->inreq_busy, &bh->state)
|
|
/* Don't know what to do if
|
|
* common->fsg is NULL */
|
|
rc = -EIO;
|
|
common->next_buffhd_to_fill = bh->next;
|
|
if (common->fsg)
|
|
rc = halt_bulk_in_endpoint(common->fsg);
|
|
} else if (fsg_is_set(common)) {
|
|
rc = pad_with_zeros(common->fsg);
|
|
} else {
|
|
/* Don't know what to do if common->fsg is NULL */
|
|
rc = -EIO;
|
|
}
|
|
break;
|
|
|
|
/* We have processed all we want from the data the host has sent.
|
|
* There may still be outstanding bulk-out requests. */
|
|
case DATA_DIR_FROM_HOST:
|
|
if (common->residue == 0) {
|
|
/* Nothing to receive */
|
|
|
|
/* Did the host stop sending unexpectedly early? */
|
|
} else if (common->short_packet_received) {
|
|
raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
|
|
rc = -EINTR;
|
|
|
|
/* We haven't processed all the incoming data. Even though
|
|
* we may be allowed to stall, doing so would cause a race.
|
|
* The controller may already have ACK'ed all the remaining
|
|
* bulk-out packets, in which case the host wouldn't see a
|
|
* STALL. Not realizing the endpoint was halted, it wouldn't
|
|
* clear the halt -- leading to problems later on. */
|
|
#if 0
|
|
} else if (common->can_stall) {
|
|
if (fsg_is_set(common))
|
|
fsg_set_halt(common->fsg,
|
|
common->fsg->bulk_out);
|
|
raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
|
|
rc = -EINTR;
|
|
#endif
|
|
|
|
/* We can't stall. Read in the excess data and throw it
|
|
* all away. */
|
|
} else {
|
|
rc = throw_away_data(common);
|
|
}
|
|
break;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
|
|
static int send_status(struct fsg_common *common)
|
|
{
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
struct fsg_buffhd *bh;
|
|
struct bulk_cs_wrap *csw;
|
|
int rc;
|
|
u8 status = USB_STATUS_PASS;
|
|
u32 sd, sdinfo = 0;
|
|
|
|
/* Wait for the next buffer to become available */
|
|
bh = common->next_buffhd_to_fill;
|
|
while (bh->state != BUF_STATE_EMPTY) {
|
|
rc = sleep_thread(common);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
if (curlun)
|
|
sd = curlun->sense_data;
|
|
else if (common->bad_lun_okay)
|
|
sd = SS_NO_SENSE;
|
|
else
|
|
sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
|
|
|
|
if (common->phase_error) {
|
|
DBG(common, "sending phase-error status\n");
|
|
status = USB_STATUS_PHASE_ERROR;
|
|
sd = SS_INVALID_COMMAND;
|
|
} else if (sd != SS_NO_SENSE) {
|
|
DBG(common, "sending command-failure status\n");
|
|
status = USB_STATUS_FAIL;
|
|
VDBG(common, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
|
|
" info x%x\n",
|
|
SK(sd), ASC(sd), ASCQ(sd), sdinfo);
|
|
}
|
|
|
|
/* Store and send the Bulk-only CSW */
|
|
csw = (void *)bh->buf;
|
|
|
|
csw->Signature = cpu_to_le32(USB_BULK_CS_SIG);
|
|
csw->Tag = common->tag;
|
|
csw->Residue = cpu_to_le32(common->residue);
|
|
csw->Status = status;
|
|
|
|
bh->inreq->length = USB_BULK_CS_WRAP_LEN;
|
|
bh->inreq->zero = 0;
|
|
START_TRANSFER_OR(common, bulk_in, bh->inreq,
|
|
&bh->inreq_busy, &bh->state)
|
|
/* Don't know what to do if common->fsg is NULL */
|
|
return -EIO;
|
|
|
|
common->next_buffhd_to_fill = bh->next;
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Check whether the command is properly formed and whether its data size
|
|
* and direction agree with the values we already have. */
|
|
static int check_command(struct fsg_common *common, int cmnd_size,
|
|
enum data_direction data_dir, unsigned int mask,
|
|
int needs_medium, const char *name)
|
|
{
|
|
int i;
|
|
int lun = common->cmnd[1] >> 5;
|
|
static const char dirletter[4] = {'u', 'o', 'i', 'n'};
|
|
char hdlen[20];
|
|
struct fsg_lun *curlun;
|
|
|
|
hdlen[0] = 0;
|
|
if (common->data_dir != DATA_DIR_UNKNOWN)
|
|
sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
|
|
common->data_size);
|
|
VDBG(common, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n",
|
|
name, cmnd_size, dirletter[(int) data_dir],
|
|
common->data_size_from_cmnd, common->cmnd_size, hdlen);
|
|
|
|
/* We can't reply at all until we know the correct data direction
|
|
* and size. */
|
|
if (common->data_size_from_cmnd == 0)
|
|
data_dir = DATA_DIR_NONE;
|
|
if (common->data_size < common->data_size_from_cmnd) {
|
|
/* Host data size < Device data size is a phase error.
|
|
* Carry out the command, but only transfer as much as
|
|
* we are allowed. */
|
|
common->data_size_from_cmnd = common->data_size;
|
|
common->phase_error = 1;
|
|
}
|
|
common->residue = common->data_size;
|
|
common->usb_amount_left = common->data_size;
|
|
|
|
/* Conflicting data directions is a phase error */
|
|
if (common->data_dir != data_dir
|
|
&& common->data_size_from_cmnd > 0) {
|
|
common->phase_error = 1;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Verify the length of the command itself */
|
|
if (cmnd_size != common->cmnd_size) {
|
|
|
|
/* Special case workaround: There are plenty of buggy SCSI
|
|
* implementations. Many have issues with cbw->Length
|
|
* field passing a wrong command size. For those cases we
|
|
* always try to work around the problem by using the length
|
|
* sent by the host side provided it is at least as large
|
|
* as the correct command length.
|
|
* Examples of such cases would be MS-Windows, which issues
|
|
* REQUEST SENSE with cbw->Length == 12 where it should
|
|
* be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
|
|
* REQUEST SENSE with cbw->Length == 10 where it should
|
|
* be 6 as well.
|
|
*/
|
|
if (cmnd_size <= common->cmnd_size) {
|
|
DBG(common, "%s is buggy! Expected length %d "
|
|
"but we got %d\n", name,
|
|
cmnd_size, common->cmnd_size);
|
|
cmnd_size = common->cmnd_size;
|
|
} else {
|
|
common->phase_error = 1;
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Check that the LUN values are consistent */
|
|
if (common->lun != lun)
|
|
DBG(common, "using LUN %d from CBW, not LUN %d from CDB\n",
|
|
common->lun, lun);
|
|
|
|
/* Check the LUN */
|
|
if (common->lun < common->nluns) {
|
|
curlun = &common->luns[common->lun];
|
|
if (common->cmnd[0] != SC_REQUEST_SENSE) {
|
|
curlun->sense_data = SS_NO_SENSE;
|
|
curlun->info_valid = 0;
|
|
}
|
|
} else {
|
|
curlun = NULL;
|
|
common->bad_lun_okay = 0;
|
|
|
|
/* INQUIRY and REQUEST SENSE commands are explicitly allowed
|
|
* to use unsupported LUNs; all others may not. */
|
|
if (common->cmnd[0] != SC_INQUIRY &&
|
|
common->cmnd[0] != SC_REQUEST_SENSE) {
|
|
DBG(common, "unsupported LUN %d\n", common->lun);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
#if 0
|
|
/* If a unit attention condition exists, only INQUIRY and
|
|
* REQUEST SENSE commands are allowed; anything else must fail. */
|
|
if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
|
|
common->cmnd[0] != SC_INQUIRY &&
|
|
common->cmnd[0] != SC_REQUEST_SENSE) {
|
|
curlun->sense_data = curlun->unit_attention_data;
|
|
curlun->unit_attention_data = SS_NO_SENSE;
|
|
return -EINVAL;
|
|
}
|
|
#endif
|
|
/* Check that only command bytes listed in the mask are non-zero */
|
|
common->cmnd[1] &= 0x1f; /* Mask away the LUN */
|
|
for (i = 1; i < cmnd_size; ++i) {
|
|
if (common->cmnd[i] && !(mask & (1 << i))) {
|
|
if (curlun)
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int do_scsi_command(struct fsg_common *common)
|
|
{
|
|
struct fsg_buffhd *bh;
|
|
int rc;
|
|
int reply = -EINVAL;
|
|
int i;
|
|
static char unknown[16];
|
|
struct fsg_lun *curlun = &common->luns[common->lun];
|
|
|
|
dump_cdb(common);
|
|
|
|
/* Wait for the next buffer to become available for data or status */
|
|
bh = common->next_buffhd_to_fill;
|
|
common->next_buffhd_to_drain = bh;
|
|
while (bh->state != BUF_STATE_EMPTY) {
|
|
rc = sleep_thread(common);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
common->phase_error = 0;
|
|
common->short_packet_received = 0;
|
|
|
|
down_read(&common->filesem); /* We're using the backing file */
|
|
switch (common->cmnd[0]) {
|
|
|
|
case SC_INQUIRY:
|
|
common->data_size_from_cmnd = common->cmnd[4];
|
|
reply = check_command(common, 6, DATA_DIR_TO_HOST,
|
|
(1<<4), 0,
|
|
"INQUIRY");
|
|
if (reply == 0)
|
|
reply = do_inquiry(common, bh);
|
|
break;
|
|
|
|
case SC_MODE_SELECT_6:
|
|
common->data_size_from_cmnd = common->cmnd[4];
|
|
reply = check_command(common, 6, DATA_DIR_FROM_HOST,
|
|
(1<<1) | (1<<4), 0,
|
|
"MODE SELECT(6)");
|
|
if (reply == 0)
|
|
reply = do_mode_select(common, bh);
|
|
break;
|
|
|
|
case SC_MODE_SELECT_10:
|
|
common->data_size_from_cmnd =
|
|
get_unaligned_be16(&common->cmnd[7]);
|
|
reply = check_command(common, 10, DATA_DIR_FROM_HOST,
|
|
(1<<1) | (3<<7), 0,
|
|
"MODE SELECT(10)");
|
|
if (reply == 0)
|
|
reply = do_mode_select(common, bh);
|
|
break;
|
|
|
|
case SC_MODE_SENSE_6:
|
|
common->data_size_from_cmnd = common->cmnd[4];
|
|
reply = check_command(common, 6, DATA_DIR_TO_HOST,
|
|
(1<<1) | (1<<2) | (1<<4), 0,
|
|
"MODE SENSE(6)");
|
|
if (reply == 0)
|
|
reply = do_mode_sense(common, bh);
|
|
break;
|
|
|
|
case SC_MODE_SENSE_10:
|
|
common->data_size_from_cmnd =
|
|
get_unaligned_be16(&common->cmnd[7]);
|
|
reply = check_command(common, 10, DATA_DIR_TO_HOST,
|
|
(1<<1) | (1<<2) | (3<<7), 0,
|
|
"MODE SENSE(10)");
|
|
if (reply == 0)
|
|
reply = do_mode_sense(common, bh);
|
|
break;
|
|
|
|
case SC_PREVENT_ALLOW_MEDIUM_REMOVAL:
|
|
common->data_size_from_cmnd = 0;
|
|
reply = check_command(common, 6, DATA_DIR_NONE,
|
|
(1<<4), 0,
|
|
"PREVENT-ALLOW MEDIUM REMOVAL");
|
|
if (reply == 0)
|
|
reply = do_prevent_allow(common);
|
|
break;
|
|
|
|
case SC_READ_6:
|
|
i = common->cmnd[4];
|
|
common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
|
|
reply = check_command(common, 6, DATA_DIR_TO_HOST,
|
|
(7<<1) | (1<<4), 1,
|
|
"READ(6)");
|
|
if (reply == 0)
|
|
reply = do_read(common);
|
|
break;
|
|
|
|
case SC_READ_10:
|
|
common->data_size_from_cmnd =
|
|
get_unaligned_be16(&common->cmnd[7]) << 9;
|
|
reply = check_command(common, 10, DATA_DIR_TO_HOST,
|
|
(1<<1) | (0xf<<2) | (3<<7), 1,
|
|
"READ(10)");
|
|
if (reply == 0)
|
|
reply = do_read(common);
|
|
break;
|
|
|
|
case SC_READ_12:
|
|
common->data_size_from_cmnd =
|
|
get_unaligned_be32(&common->cmnd[6]) << 9;
|
|
reply = check_command(common, 12, DATA_DIR_TO_HOST,
|
|
(1<<1) | (0xf<<2) | (0xf<<6), 1,
|
|
"READ(12)");
|
|
if (reply == 0)
|
|
reply = do_read(common);
|
|
break;
|
|
|
|
case SC_READ_CAPACITY:
|
|
common->data_size_from_cmnd = 8;
|
|
reply = check_command(common, 10, DATA_DIR_TO_HOST,
|
|
(0xf<<2) | (1<<8), 1,
|
|
"READ CAPACITY");
|
|
if (reply == 0)
|
|
reply = do_read_capacity(common, bh);
|
|
break;
|
|
|
|
case SC_READ_HEADER:
|
|
if (!common->luns[common->lun].cdrom)
|
|
goto unknown_cmnd;
|
|
common->data_size_from_cmnd =
|
|
get_unaligned_be16(&common->cmnd[7]);
|
|
reply = check_command(common, 10, DATA_DIR_TO_HOST,
|
|
(3<<7) | (0x1f<<1), 1,
|
|
"READ HEADER");
|
|
if (reply == 0)
|
|
reply = do_read_header(common, bh);
|
|
break;
|
|
|
|
case SC_READ_TOC:
|
|
if (!common->luns[common->lun].cdrom)
|
|
goto unknown_cmnd;
|
|
common->data_size_from_cmnd =
|
|
get_unaligned_be16(&common->cmnd[7]);
|
|
reply = check_command(common, 10, DATA_DIR_TO_HOST,
|
|
(7<<6) | (1<<1), 1,
|
|
"READ TOC");
|
|
if (reply == 0)
|
|
reply = do_read_toc(common, bh);
|
|
break;
|
|
|
|
case SC_READ_FORMAT_CAPACITIES:
|
|
common->data_size_from_cmnd =
|
|
get_unaligned_be16(&common->cmnd[7]);
|
|
reply = check_command(common, 10, DATA_DIR_TO_HOST,
|
|
(3<<7), 1,
|
|
"READ FORMAT CAPACITIES");
|
|
if (reply == 0)
|
|
reply = do_read_format_capacities(common, bh);
|
|
break;
|
|
|
|
case SC_REQUEST_SENSE:
|
|
common->data_size_from_cmnd = common->cmnd[4];
|
|
reply = check_command(common, 6, DATA_DIR_TO_HOST,
|
|
(1<<4), 0,
|
|
"REQUEST SENSE");
|
|
if (reply == 0)
|
|
reply = do_request_sense(common, bh);
|
|
break;
|
|
|
|
case SC_START_STOP_UNIT:
|
|
common->data_size_from_cmnd = 0;
|
|
reply = check_command(common, 6, DATA_DIR_NONE,
|
|
(1<<1) | (1<<4), 0,
|
|
"START-STOP UNIT");
|
|
if (reply == 0)
|
|
reply = do_start_stop(common);
|
|
break;
|
|
|
|
case SC_SYNCHRONIZE_CACHE:
|
|
common->data_size_from_cmnd = 0;
|
|
reply = check_command(common, 10, DATA_DIR_NONE,
|
|
(0xf<<2) | (3<<7), 1,
|
|
"SYNCHRONIZE CACHE");
|
|
if (reply == 0)
|
|
reply = do_synchronize_cache(common);
|
|
break;
|
|
|
|
case SC_TEST_UNIT_READY:
|
|
common->data_size_from_cmnd = 0;
|
|
reply = check_command(common, 6, DATA_DIR_NONE,
|
|
0, 1,
|
|
"TEST UNIT READY");
|
|
break;
|
|
|
|
/* Although optional, this command is used by MS-Windows. We
|
|
* support a minimal version: BytChk must be 0. */
|
|
case SC_VERIFY:
|
|
common->data_size_from_cmnd = 0;
|
|
reply = check_command(common, 10, DATA_DIR_NONE,
|
|
(1<<1) | (0xf<<2) | (3<<7), 1,
|
|
"VERIFY");
|
|
if (reply == 0)
|
|
reply = do_verify(common);
|
|
break;
|
|
|
|
case SC_WRITE_6:
|
|
i = common->cmnd[4];
|
|
common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
|
|
reply = check_command(common, 6, DATA_DIR_FROM_HOST,
|
|
(7<<1) | (1<<4), 1,
|
|
"WRITE(6)");
|
|
if (reply == 0)
|
|
reply = do_write(common);
|
|
break;
|
|
|
|
case SC_WRITE_10:
|
|
common->data_size_from_cmnd =
|
|
get_unaligned_be16(&common->cmnd[7]) << 9;
|
|
reply = check_command(common, 10, DATA_DIR_FROM_HOST,
|
|
(1<<1) | (0xf<<2) | (3<<7), 1,
|
|
"WRITE(10)");
|
|
if (reply == 0)
|
|
reply = do_write(common);
|
|
break;
|
|
|
|
case SC_WRITE_12:
|
|
common->data_size_from_cmnd =
|
|
get_unaligned_be32(&common->cmnd[6]) << 9;
|
|
reply = check_command(common, 12, DATA_DIR_FROM_HOST,
|
|
(1<<1) | (0xf<<2) | (0xf<<6), 1,
|
|
"WRITE(12)");
|
|
if (reply == 0)
|
|
reply = do_write(common);
|
|
break;
|
|
|
|
/* Some mandatory commands that we recognize but don't implement.
|
|
* They don't mean much in this setting. It's left as an exercise
|
|
* for anyone interested to implement RESERVE and RELEASE in terms
|
|
* of Posix locks. */
|
|
case SC_FORMAT_UNIT:
|
|
case SC_RELEASE:
|
|
case SC_RESERVE:
|
|
case SC_SEND_DIAGNOSTIC:
|
|
/* Fall through */
|
|
|
|
default:
|
|
unknown_cmnd:
|
|
common->data_size_from_cmnd = 0;
|
|
sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
|
|
reply = check_command(common, common->cmnd_size,
|
|
DATA_DIR_UNKNOWN, 0xff, 0, unknown);
|
|
if (reply == 0) {
|
|
curlun->sense_data = SS_INVALID_COMMAND;
|
|
reply = -EINVAL;
|
|
}
|
|
break;
|
|
}
|
|
up_read(&common->filesem);
|
|
|
|
if (reply == -EINTR)
|
|
return -EINTR;
|
|
|
|
/* Set up the single reply buffer for finish_reply() */
|
|
if (reply == -EINVAL)
|
|
reply = 0; /* Error reply length */
|
|
if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
|
|
reply = min((u32) reply, common->data_size_from_cmnd);
|
|
bh->inreq->length = reply;
|
|
bh->state = BUF_STATE_FULL;
|
|
common->residue -= reply;
|
|
} /* Otherwise it's already set */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
|
|
{
|
|
struct usb_request *req = bh->outreq;
|
|
struct fsg_bulk_cb_wrap *cbw = req->buf;
|
|
struct fsg_common *common = fsg->common;
|
|
|
|
/* Was this a real packet? Should it be ignored? */
|
|
if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
|
|
return -EINVAL;
|
|
|
|
/* Is the CBW valid? */
|
|
if (req->actual != USB_BULK_CB_WRAP_LEN ||
|
|
cbw->Signature != cpu_to_le32(
|
|
USB_BULK_CB_SIG)) {
|
|
DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
|
|
req->actual,
|
|
le32_to_cpu(cbw->Signature));
|
|
|
|
/* The Bulk-only spec says we MUST stall the IN endpoint
|
|
* (6.6.1), so it's unavoidable. It also says we must
|
|
* retain this state until the next reset, but there's
|
|
* no way to tell the controller driver it should ignore
|
|
* Clear-Feature(HALT) requests.
|
|
*
|
|
* We aren't required to halt the OUT endpoint; instead
|
|
* we can simply accept and discard any data received
|
|
* until the next reset. */
|
|
wedge_bulk_in_endpoint(fsg);
|
|
generic_set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Is the CBW meaningful? */
|
|
if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG ||
|
|
cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
|
|
DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
|
|
"cmdlen %u\n",
|
|
cbw->Lun, cbw->Flags, cbw->Length);
|
|
|
|
/* We can do anything we want here, so let's stall the
|
|
* bulk pipes if we are allowed to. */
|
|
if (common->can_stall) {
|
|
fsg_set_halt(fsg, fsg->bulk_out);
|
|
halt_bulk_in_endpoint(fsg);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Save the command for later */
|
|
common->cmnd_size = cbw->Length;
|
|
memcpy(common->cmnd, cbw->CDB, common->cmnd_size);
|
|
if (cbw->Flags & USB_BULK_IN_FLAG)
|
|
common->data_dir = DATA_DIR_TO_HOST;
|
|
else
|
|
common->data_dir = DATA_DIR_FROM_HOST;
|
|
common->data_size = le32_to_cpu(cbw->DataTransferLength);
|
|
if (common->data_size == 0)
|
|
common->data_dir = DATA_DIR_NONE;
|
|
common->lun = cbw->Lun;
|
|
common->tag = cbw->Tag;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int get_next_command(struct fsg_common *common)
|
|
{
|
|
struct fsg_buffhd *bh;
|
|
int rc = 0;
|
|
|
|
/* Wait for the next buffer to become available */
|
|
bh = common->next_buffhd_to_fill;
|
|
while (bh->state != BUF_STATE_EMPTY) {
|
|
rc = sleep_thread(common);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
/* Queue a request to read a Bulk-only CBW */
|
|
set_bulk_out_req_length(common, bh, USB_BULK_CB_WRAP_LEN);
|
|
bh->outreq->short_not_ok = 1;
|
|
START_TRANSFER_OR(common, bulk_out, bh->outreq,
|
|
&bh->outreq_busy, &bh->state)
|
|
/* Don't know what to do if common->fsg is NULL */
|
|
return -EIO;
|
|
|
|
/* We will drain the buffer in software, which means we
|
|
* can reuse it for the next filling. No need to advance
|
|
* next_buffhd_to_fill. */
|
|
|
|
/* Wait for the CBW to arrive */
|
|
while (bh->state != BUF_STATE_FULL) {
|
|
rc = sleep_thread(common);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO;
|
|
bh->state = BUF_STATE_EMPTY;
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int enable_endpoint(struct fsg_common *common, struct usb_ep *ep,
|
|
const struct usb_endpoint_descriptor *d)
|
|
{
|
|
int rc;
|
|
|
|
ep->driver_data = common;
|
|
rc = usb_ep_enable(ep, d);
|
|
if (rc)
|
|
ERROR(common, "can't enable %s, result %d\n", ep->name, rc);
|
|
return rc;
|
|
}
|
|
|
|
static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
|
|
struct usb_request **preq)
|
|
{
|
|
*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
|
|
if (*preq)
|
|
return 0;
|
|
ERROR(common, "can't allocate request for %s\n", ep->name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Reset interface setting and re-init endpoint state (toggle etc). */
|
|
static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
|
|
{
|
|
const struct usb_endpoint_descriptor *d;
|
|
struct fsg_dev *fsg;
|
|
int i, rc = 0;
|
|
|
|
if (common->running)
|
|
DBG(common, "reset interface\n");
|
|
|
|
reset:
|
|
/* Deallocate the requests */
|
|
if (common->fsg) {
|
|
fsg = common->fsg;
|
|
|
|
for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
|
|
struct fsg_buffhd *bh = &common->buffhds[i];
|
|
|
|
if (bh->inreq) {
|
|
usb_ep_free_request(fsg->bulk_in, bh->inreq);
|
|
bh->inreq = NULL;
|
|
}
|
|
if (bh->outreq) {
|
|
usb_ep_free_request(fsg->bulk_out, bh->outreq);
|
|
bh->outreq = NULL;
|
|
}
|
|
}
|
|
|
|
/* Disable the endpoints */
|
|
if (fsg->bulk_in_enabled) {
|
|
usb_ep_disable(fsg->bulk_in);
|
|
fsg->bulk_in_enabled = 0;
|
|
}
|
|
if (fsg->bulk_out_enabled) {
|
|
usb_ep_disable(fsg->bulk_out);
|
|
fsg->bulk_out_enabled = 0;
|
|
}
|
|
|
|
common->fsg = NULL;
|
|
/* wake_up(&common->fsg_wait); */
|
|
}
|
|
|
|
common->running = 0;
|
|
if (!new_fsg || rc)
|
|
return rc;
|
|
|
|
common->fsg = new_fsg;
|
|
fsg = common->fsg;
|
|
|
|
/* Enable the endpoints */
|
|
d = fsg_ep_desc(common->gadget,
|
|
&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
|
|
rc = enable_endpoint(common, fsg->bulk_in, d);
|
|
if (rc)
|
|
goto reset;
|
|
fsg->bulk_in_enabled = 1;
|
|
|
|
d = fsg_ep_desc(common->gadget,
|
|
&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
|
|
rc = enable_endpoint(common, fsg->bulk_out, d);
|
|
if (rc)
|
|
goto reset;
|
|
fsg->bulk_out_enabled = 1;
|
|
common->bulk_out_maxpacket =
|
|
le16_to_cpu(get_unaligned(&d->wMaxPacketSize));
|
|
generic_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
|
|
|
|
/* Allocate the requests */
|
|
for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
|
|
struct fsg_buffhd *bh = &common->buffhds[i];
|
|
|
|
rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
|
|
if (rc)
|
|
goto reset;
|
|
rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
|
|
if (rc)
|
|
goto reset;
|
|
bh->inreq->buf = bh->outreq->buf = bh->buf;
|
|
bh->inreq->context = bh->outreq->context = bh;
|
|
bh->inreq->complete = bulk_in_complete;
|
|
bh->outreq->complete = bulk_out_complete;
|
|
}
|
|
|
|
common->running = 1;
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
/****************************** ALT CONFIGS ******************************/
|
|
|
|
|
|
static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
|
|
{
|
|
struct fsg_dev *fsg = fsg_from_func(f);
|
|
fsg->common->new_fsg = fsg;
|
|
raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
|
|
return 0;
|
|
}
|
|
|
|
static void fsg_disable(struct usb_function *f)
|
|
{
|
|
struct fsg_dev *fsg = fsg_from_func(f);
|
|
fsg->common->new_fsg = NULL;
|
|
raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void handle_exception(struct fsg_common *common)
|
|
{
|
|
int i;
|
|
struct fsg_buffhd *bh;
|
|
enum fsg_state old_state;
|
|
struct fsg_lun *curlun;
|
|
unsigned int exception_req_tag;
|
|
|
|
/* Cancel all the pending transfers */
|
|
if (common->fsg) {
|
|
for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
|
|
bh = &common->buffhds[i];
|
|
if (bh->inreq_busy)
|
|
usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
|
|
if (bh->outreq_busy)
|
|
usb_ep_dequeue(common->fsg->bulk_out,
|
|
bh->outreq);
|
|
}
|
|
|
|
/* Wait until everything is idle */
|
|
for (;;) {
|
|
int num_active = 0;
|
|
for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
|
|
bh = &common->buffhds[i];
|
|
num_active += bh->inreq_busy + bh->outreq_busy;
|
|
}
|
|
if (num_active == 0)
|
|
break;
|
|
if (sleep_thread(common))
|
|
return;
|
|
}
|
|
|
|
/* Clear out the controller's fifos */
|
|
if (common->fsg->bulk_in_enabled)
|
|
usb_ep_fifo_flush(common->fsg->bulk_in);
|
|
if (common->fsg->bulk_out_enabled)
|
|
usb_ep_fifo_flush(common->fsg->bulk_out);
|
|
}
|
|
|
|
/* Reset the I/O buffer states and pointers, the SCSI
|
|
* state, and the exception. Then invoke the handler. */
|
|
|
|
for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
|
|
bh = &common->buffhds[i];
|
|
bh->state = BUF_STATE_EMPTY;
|
|
}
|
|
common->next_buffhd_to_fill = &common->buffhds[0];
|
|
common->next_buffhd_to_drain = &common->buffhds[0];
|
|
exception_req_tag = common->exception_req_tag;
|
|
old_state = common->state;
|
|
|
|
if (old_state == FSG_STATE_ABORT_BULK_OUT)
|
|
common->state = FSG_STATE_STATUS_PHASE;
|
|
else {
|
|
for (i = 0; i < common->nluns; ++i) {
|
|
curlun = &common->luns[i];
|
|
curlun->sense_data = SS_NO_SENSE;
|
|
curlun->info_valid = 0;
|
|
}
|
|
common->state = FSG_STATE_IDLE;
|
|
}
|
|
|
|
/* Carry out any extra actions required for the exception */
|
|
switch (old_state) {
|
|
case FSG_STATE_ABORT_BULK_OUT:
|
|
send_status(common);
|
|
|
|
if (common->state == FSG_STATE_STATUS_PHASE)
|
|
common->state = FSG_STATE_IDLE;
|
|
break;
|
|
|
|
case FSG_STATE_RESET:
|
|
/* In case we were forced against our will to halt a
|
|
* bulk endpoint, clear the halt now. (The SuperH UDC
|
|
* requires this.) */
|
|
if (!fsg_is_set(common))
|
|
break;
|
|
if (test_and_clear_bit(IGNORE_BULK_OUT,
|
|
&common->fsg->atomic_bitflags))
|
|
usb_ep_clear_halt(common->fsg->bulk_in);
|
|
|
|
if (common->ep0_req_tag == exception_req_tag)
|
|
ep0_queue(common); /* Complete the status stage */
|
|
|
|
break;
|
|
|
|
case FSG_STATE_CONFIG_CHANGE:
|
|
do_set_interface(common, common->new_fsg);
|
|
break;
|
|
|
|
case FSG_STATE_EXIT:
|
|
case FSG_STATE_TERMINATED:
|
|
do_set_interface(common, NULL); /* Free resources */
|
|
common->state = FSG_STATE_TERMINATED; /* Stop the thread */
|
|
break;
|
|
|
|
case FSG_STATE_INTERFACE_CHANGE:
|
|
case FSG_STATE_DISCONNECT:
|
|
case FSG_STATE_COMMAND_PHASE:
|
|
case FSG_STATE_DATA_PHASE:
|
|
case FSG_STATE_STATUS_PHASE:
|
|
case FSG_STATE_IDLE:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
int fsg_main_thread(void *common_)
|
|
{
|
|
int ret;
|
|
struct fsg_common *common = the_fsg_common;
|
|
/* The main loop */
|
|
do {
|
|
if (exception_in_progress(common)) {
|
|
handle_exception(common);
|
|
continue;
|
|
}
|
|
|
|
if (!common->running) {
|
|
ret = sleep_thread(common);
|
|
if (ret)
|
|
return ret;
|
|
|
|
continue;
|
|
}
|
|
|
|
ret = get_next_command(common);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!exception_in_progress(common))
|
|
common->state = FSG_STATE_DATA_PHASE;
|
|
|
|
if (do_scsi_command(common) || finish_reply(common))
|
|
continue;
|
|
|
|
if (!exception_in_progress(common))
|
|
common->state = FSG_STATE_STATUS_PHASE;
|
|
|
|
if (send_status(common))
|
|
continue;
|
|
|
|
if (!exception_in_progress(common))
|
|
common->state = FSG_STATE_IDLE;
|
|
} while (0);
|
|
|
|
common->thread_task = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fsg_common_release(struct kref *ref);
|
|
|
|
static struct fsg_common *fsg_common_init(struct fsg_common *common,
|
|
struct usb_composite_dev *cdev)
|
|
{
|
|
struct usb_gadget *gadget = cdev->gadget;
|
|
struct fsg_buffhd *bh;
|
|
struct fsg_lun *curlun;
|
|
int nluns, i, rc;
|
|
|
|
/* Find out how many LUNs there should be */
|
|
nluns = ums_count;
|
|
if (nluns < 1 || nluns > FSG_MAX_LUNS) {
|
|
printf("invalid number of LUNs: %u\n", nluns);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
/* Allocate? */
|
|
if (!common) {
|
|
common = calloc(sizeof(*common), 1);
|
|
if (!common)
|
|
return ERR_PTR(-ENOMEM);
|
|
common->free_storage_on_release = 1;
|
|
} else {
|
|
memset(common, 0, sizeof(*common));
|
|
common->free_storage_on_release = 0;
|
|
}
|
|
|
|
common->ops = NULL;
|
|
common->private_data = NULL;
|
|
|
|
common->gadget = gadget;
|
|
common->ep0 = gadget->ep0;
|
|
common->ep0req = cdev->req;
|
|
|
|
/* Maybe allocate device-global string IDs, and patch descriptors */
|
|
if (fsg_strings[FSG_STRING_INTERFACE].id == 0) {
|
|
rc = usb_string_id(cdev);
|
|
if (unlikely(rc < 0))
|
|
goto error_release;
|
|
fsg_strings[FSG_STRING_INTERFACE].id = rc;
|
|
fsg_intf_desc.iInterface = rc;
|
|
}
|
|
|
|
/* Create the LUNs, open their backing files, and register the
|
|
* LUN devices in sysfs. */
|
|
curlun = calloc(nluns, sizeof *curlun);
|
|
if (!curlun) {
|
|
rc = -ENOMEM;
|
|
goto error_release;
|
|
}
|
|
common->nluns = nluns;
|
|
|
|
for (i = 0; i < nluns; i++) {
|
|
common->luns[i].removable = 1;
|
|
|
|
rc = fsg_lun_open(&common->luns[i], ums[i].num_sectors, "");
|
|
if (rc)
|
|
goto error_luns;
|
|
}
|
|
common->lun = 0;
|
|
|
|
/* Data buffers cyclic list */
|
|
bh = common->buffhds;
|
|
|
|
i = FSG_NUM_BUFFERS;
|
|
goto buffhds_first_it;
|
|
do {
|
|
bh->next = bh + 1;
|
|
++bh;
|
|
buffhds_first_it:
|
|
bh->inreq_busy = 0;
|
|
bh->outreq_busy = 0;
|
|
bh->buf = memalign(CONFIG_SYS_CACHELINE_SIZE, FSG_BUFLEN);
|
|
if (unlikely(!bh->buf)) {
|
|
rc = -ENOMEM;
|
|
goto error_release;
|
|
}
|
|
} while (--i);
|
|
bh->next = common->buffhds;
|
|
|
|
snprintf(common->inquiry_string, sizeof common->inquiry_string,
|
|
"%-8s%-16s%04x",
|
|
"Linux ",
|
|
"File-Store Gadget",
|
|
0xffff);
|
|
|
|
/* Some peripheral controllers are known not to be able to
|
|
* halt bulk endpoints correctly. If one of them is present,
|
|
* disable stalls.
|
|
*/
|
|
|
|
/* Tell the thread to start working */
|
|
common->thread_task =
|
|
kthread_create(fsg_main_thread, common,
|
|
OR(cfg->thread_name, "file-storage"));
|
|
if (IS_ERR(common->thread_task)) {
|
|
rc = PTR_ERR(common->thread_task);
|
|
goto error_release;
|
|
}
|
|
|
|
#undef OR
|
|
/* Information */
|
|
INFO(common, FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
|
|
INFO(common, "Number of LUNs=%d\n", common->nluns);
|
|
|
|
return common;
|
|
|
|
error_luns:
|
|
common->nluns = i + 1;
|
|
error_release:
|
|
common->state = FSG_STATE_TERMINATED; /* The thread is dead */
|
|
/* Call fsg_common_release() directly, ref might be not
|
|
* initialised */
|
|
fsg_common_release(&common->ref);
|
|
return ERR_PTR(rc);
|
|
}
|
|
|
|
static void fsg_common_release(struct kref *ref)
|
|
{
|
|
struct fsg_common *common = container_of(ref, struct fsg_common, ref);
|
|
|
|
/* If the thread isn't already dead, tell it to exit now */
|
|
if (common->state != FSG_STATE_TERMINATED) {
|
|
raise_exception(common, FSG_STATE_EXIT);
|
|
wait_for_completion(&common->thread_notifier);
|
|
}
|
|
|
|
if (likely(common->luns)) {
|
|
struct fsg_lun *lun = common->luns;
|
|
unsigned i = common->nluns;
|
|
|
|
/* In error recovery common->nluns may be zero. */
|
|
for (; i; --i, ++lun)
|
|
fsg_lun_close(lun);
|
|
|
|
kfree(common->luns);
|
|
}
|
|
|
|
{
|
|
struct fsg_buffhd *bh = common->buffhds;
|
|
unsigned i = FSG_NUM_BUFFERS;
|
|
do {
|
|
kfree(bh->buf);
|
|
} while (++bh, --i);
|
|
}
|
|
|
|
if (common->free_storage_on_release)
|
|
kfree(common);
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
* usb_copy_descriptors - copy a vector of USB descriptors
|
|
* @src: null-terminated vector to copy
|
|
* Context: initialization code, which may sleep
|
|
*
|
|
* This makes a copy of a vector of USB descriptors. Its primary use
|
|
* is to support usb_function objects which can have multiple copies,
|
|
* each needing different descriptors. Functions may have static
|
|
* tables of descriptors, which are used as templates and customized
|
|
* with identifiers (for interfaces, strings, endpoints, and more)
|
|
* as needed by a given function instance.
|
|
*/
|
|
struct usb_descriptor_header **
|
|
usb_copy_descriptors(struct usb_descriptor_header **src)
|
|
{
|
|
struct usb_descriptor_header **tmp;
|
|
unsigned bytes;
|
|
unsigned n_desc;
|
|
void *mem;
|
|
struct usb_descriptor_header **ret;
|
|
|
|
/* count descriptors and their sizes; then add vector size */
|
|
for (bytes = 0, n_desc = 0, tmp = src; *tmp; tmp++, n_desc++)
|
|
bytes += (*tmp)->bLength;
|
|
bytes += (n_desc + 1) * sizeof(*tmp);
|
|
|
|
mem = memalign(CONFIG_SYS_CACHELINE_SIZE, bytes);
|
|
if (!mem)
|
|
return NULL;
|
|
|
|
/* fill in pointers starting at "tmp",
|
|
* to descriptors copied starting at "mem";
|
|
* and return "ret"
|
|
*/
|
|
tmp = mem;
|
|
ret = mem;
|
|
mem += (n_desc + 1) * sizeof(*tmp);
|
|
while (*src) {
|
|
memcpy(mem, *src, (*src)->bLength);
|
|
*tmp = mem;
|
|
tmp++;
|
|
mem += (*src)->bLength;
|
|
src++;
|
|
}
|
|
*tmp = NULL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
|
|
{
|
|
struct fsg_dev *fsg = fsg_from_func(f);
|
|
|
|
DBG(fsg, "unbind\n");
|
|
if (fsg->common->fsg == fsg) {
|
|
fsg->common->new_fsg = NULL;
|
|
raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
|
|
}
|
|
|
|
free(fsg->function.descriptors);
|
|
free(fsg->function.hs_descriptors);
|
|
kfree(fsg);
|
|
}
|
|
|
|
static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
|
|
{
|
|
struct fsg_dev *fsg = fsg_from_func(f);
|
|
struct usb_gadget *gadget = c->cdev->gadget;
|
|
int i;
|
|
struct usb_ep *ep;
|
|
fsg->gadget = gadget;
|
|
|
|
/* New interface */
|
|
i = usb_interface_id(c, f);
|
|
if (i < 0)
|
|
return i;
|
|
fsg_intf_desc.bInterfaceNumber = i;
|
|
fsg->interface_number = i;
|
|
|
|
/* Find all the endpoints we will use */
|
|
ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
|
|
if (!ep)
|
|
goto autoconf_fail;
|
|
ep->driver_data = fsg->common; /* claim the endpoint */
|
|
fsg->bulk_in = ep;
|
|
|
|
ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
|
|
if (!ep)
|
|
goto autoconf_fail;
|
|
ep->driver_data = fsg->common; /* claim the endpoint */
|
|
fsg->bulk_out = ep;
|
|
|
|
/* Copy descriptors */
|
|
f->descriptors = usb_copy_descriptors(fsg_fs_function);
|
|
if (unlikely(!f->descriptors))
|
|
return -ENOMEM;
|
|
|
|
if (gadget_is_dualspeed(gadget)) {
|
|
/* Assume endpoint addresses are the same for both speeds */
|
|
fsg_hs_bulk_in_desc.bEndpointAddress =
|
|
fsg_fs_bulk_in_desc.bEndpointAddress;
|
|
fsg_hs_bulk_out_desc.bEndpointAddress =
|
|
fsg_fs_bulk_out_desc.bEndpointAddress;
|
|
f->hs_descriptors = usb_copy_descriptors(fsg_hs_function);
|
|
if (unlikely(!f->hs_descriptors)) {
|
|
free(f->descriptors);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
autoconf_fail:
|
|
ERROR(fsg, "unable to autoconfigure all endpoints\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
|
|
/****************************** ADD FUNCTION ******************************/
|
|
|
|
static struct usb_gadget_strings *fsg_strings_array[] = {
|
|
&fsg_stringtab,
|
|
NULL,
|
|
};
|
|
|
|
static int fsg_bind_config(struct usb_composite_dev *cdev,
|
|
struct usb_configuration *c,
|
|
struct fsg_common *common)
|
|
{
|
|
struct fsg_dev *fsg;
|
|
int rc;
|
|
|
|
fsg = calloc(1, sizeof *fsg);
|
|
if (!fsg)
|
|
return -ENOMEM;
|
|
fsg->function.name = FSG_DRIVER_DESC;
|
|
fsg->function.strings = fsg_strings_array;
|
|
fsg->function.bind = fsg_bind;
|
|
fsg->function.unbind = fsg_unbind;
|
|
fsg->function.setup = fsg_setup;
|
|
fsg->function.set_alt = fsg_set_alt;
|
|
fsg->function.disable = fsg_disable;
|
|
|
|
fsg->common = common;
|
|
common->fsg = fsg;
|
|
/* Our caller holds a reference to common structure so we
|
|
* don't have to be worry about it being freed until we return
|
|
* from this function. So instead of incrementing counter now
|
|
* and decrement in error recovery we increment it only when
|
|
* call to usb_add_function() was successful. */
|
|
|
|
rc = usb_add_function(c, &fsg->function);
|
|
|
|
if (rc)
|
|
kfree(fsg);
|
|
|
|
return rc;
|
|
}
|
|
|
|
int fsg_add(struct usb_configuration *c)
|
|
{
|
|
struct fsg_common *fsg_common;
|
|
|
|
fsg_common = fsg_common_init(NULL, c->cdev);
|
|
|
|
fsg_common->vendor_name = 0;
|
|
fsg_common->product_name = 0;
|
|
fsg_common->release = 0xffff;
|
|
|
|
fsg_common->ops = NULL;
|
|
fsg_common->private_data = NULL;
|
|
|
|
the_fsg_common = fsg_common;
|
|
|
|
return fsg_bind_config(c->cdev, c, fsg_common);
|
|
}
|
|
|
|
int fsg_init(struct ums *ums_devs, int count, unsigned int controller_idx)
|
|
{
|
|
ums = ums_devs;
|
|
ums_count = count;
|
|
controller_index = controller_idx;
|
|
|
|
return 0;
|
|
}
|
|
|
|
DECLARE_GADGET_BIND_CALLBACK(usb_dnl_ums, fsg_add);
|