mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-20 18:23:08 +00:00
c8ef3eed61
Now that Linux has accepted these tags, move U-Boot over to use them. Signed-off-by: Simon Glass <sjg@chromium.org>
490 lines
17 KiB
Text
490 lines
17 KiB
Text
* Intel FSP-S configuration
|
|
|
|
Several Intel platforms require the execution of the Intel FSP (Firmware
|
|
Support Package) for initialization. The FSP consists of multiple parts, one
|
|
of which is the FSP-S (Silicon initialization phase).
|
|
|
|
This binding applies to the FSP-S for the Intel Apollo Lake SoC.
|
|
|
|
The FSP-S is available on Github [1].
|
|
For detailed information on the FSP-S parameters see the documentation in
|
|
FSP/ApolloLakeFspBinPkg/Docs [2].
|
|
|
|
The properties of this binding are all optional. If no properties are set the
|
|
values of the FSP-S are used.
|
|
|
|
[1] https://github.com/IntelFsp/FSP
|
|
[2] https://github.com/IntelFsp/FSP/tree/master/ApolloLakeFspBinPkg/Docs
|
|
|
|
Optional properties:
|
|
- fsps,active-processor-cores: ActiveProcessorCores
|
|
- fsps,disable-core1: Disable Core1
|
|
- fsps,disable-core2: Disable Core2
|
|
- fsps,disable-core2: Disable Core3
|
|
- fsps,vmx-enable: VMX Enable
|
|
- fsps,proc-trace-mem-size: Memory region allocation for Processor Trace
|
|
0xFF: Disable (default)
|
|
- fsps,proc-trace-enable: Enable Processor Trace
|
|
- fsps,eist: Eist
|
|
- fsps,boot-p-state: Boot PState
|
|
0: HFM (default)
|
|
1: LFM
|
|
- fsps,enable-cx: CPU power states (C-states)
|
|
- fsps,c1e: Enhanced C-states
|
|
- fsps,bi-proc-hot: Bi-Directional PROCHOT#
|
|
- fsps,pkg-c-state-limit: Max Pkg Cstate
|
|
0: PkgC0C1
|
|
1: PkgC2
|
|
2: PkgC3 (default)
|
|
3: PkgC6
|
|
4: PkgC7
|
|
5: PkgC7s
|
|
6: PkgC8
|
|
7: PkgC9
|
|
8: PkgC10
|
|
9: PkgCMax
|
|
254: PkgCpuDefault
|
|
255: PkgAuto
|
|
- fsps,c-state-auto-demotion: C-State auto-demotion
|
|
0: Disable C1 and C3 Auto-demotion (default)
|
|
1: Enable C3/C6/C7 Auto-demotion to C1
|
|
2: Enable C6/C7 Auto-demotion to C3
|
|
3: Enable C6/C7 Auto-demotion to C1 and C3
|
|
- fsps,c-state-un-demotion: C-State un-demotion
|
|
0: Disable C1 and C3 Un-demotion (default)
|
|
1: Enable C1 Un-demotion
|
|
2: Enable C3 Un-demotion
|
|
3: Enable C1 and C3 Un-demotion
|
|
- fsps,max-core-c-state: Max Core C-State
|
|
0: Unlimited
|
|
1: C1
|
|
2: C3
|
|
3: C6
|
|
4: C7
|
|
5: C8
|
|
6: C9
|
|
7: C10
|
|
8: CCx (default)
|
|
- fsps,pkg-c-state-demotion: Package C-State Demotion
|
|
- fsps,pkg-c-state-un-demotion: Package C-State Un-demotion
|
|
- fsps,turbo-mode: Turbo Mode
|
|
- fsps,hda-verb-table-entry-num: SC HDA Verb Table Entry Number
|
|
0: (default)
|
|
- fsps,hda-verb-table-ptr: SC HDA Verb Table Pointer
|
|
0x00000000: (default)
|
|
- fsps,p2sb-unhide: Enable/Disable P2SB device hidden
|
|
- fsps,ipu-en: IPU Enable/Disable
|
|
- fsps,ipu-acpi-mode: IMGU ACPI mode selection
|
|
0: Auto
|
|
1: IGFX Child device (default)
|
|
2: ACPI device
|
|
- fsps,force-wake: Enable ForceWake
|
|
- fsps,gtt-mm-adr: GttMmAdr
|
|
0xbf000000: (default)
|
|
- fsps,gm-adr: GmAdr
|
|
0xa0000000: (default)
|
|
- fsps,pavp-lock: Enable PavpLock
|
|
- fsps,graphics-freq-modify: Enable GraphicsFreqModify
|
|
- fsps,graphics-freq-req: Enable GraphicsFreqReq
|
|
- fsps,graphics-video-freq: Enable GraphicsVideoFreq
|
|
- fsps,pm-lock: Enable PmLock
|
|
- fsps,dop-clock-gating: Enable DopClockGating
|
|
- fsps,unsolicited-attack-override: Enable UnsolicitedAttackOverride
|
|
- fsps,wopcm-support: Enable WOPCMSupport
|
|
- fsps,wopcm-size: Enable WOPCMSize
|
|
- fsps,power-gating: Enable PowerGating
|
|
- fsps,unit-level-clock-gating: Enable UnitLevelClockGating
|
|
- fsps,fast-boot: Enable FastBoot
|
|
- fsps,dyn-sr: Enable DynSR
|
|
- fsps,sa-ipu-enable: Enable SaIpuEnable
|
|
- fsps,pm-support: GT PM Support
|
|
- fsps,enable-render-standby: RC6(Render Standby)
|
|
- fsps,logo-size: BMP Logo Data Size
|
|
- fsps,logo-ptr: BMP Logo Data Pointer
|
|
- fsps,graphics-config-ptr: Graphics Configuration Data Pointer
|
|
- fsps,pavp-enable: PAVP Enable
|
|
- fsps,pavp-pr3: PAVP PR3
|
|
- fsps,cd-clock: CdClock Frequency selection
|
|
0: 144MHz
|
|
1: 288MHz
|
|
2: 384MHz
|
|
3: 576MHz
|
|
4: 624MHz (default)
|
|
- fsps,pei-graphics-peim-init: Enable/Disable PeiGraphicsPeimInit
|
|
- fsps,write-protection-enable: Write Protection Support
|
|
- fsps,read-protection-enable: Read Protection Support
|
|
- fsps,protected-range-limit: Protected Range Limitation
|
|
0x0FFF: (default)
|
|
- fsps,protected-range-base: Protected Range Base
|
|
0x0000: (default)
|
|
- fsps,gmm: Enable SC Gaussian Mixture Models
|
|
- fsps,clk-gating-pgcb-clk-trunk: GMM Clock Gating - PGCB Clock Trunk
|
|
- fsps,clk-gating-sb: GMM Clock Gating - Sideband
|
|
- fsps,clk-gating-sb-clk-trunk: GMM Clock Gating - Sideband
|
|
- fsps,clk-gating-sb-clk-partition: GMM Clock Gating - Sideband Clock
|
|
Partition
|
|
- fsps,clk-gating-core: GMM Clock Gating - Core
|
|
- fsps,clk-gating-dma: GMM Clock Gating - DMA
|
|
- fsps,clk-gating-reg-access: GMM Clock Gating - Register Access
|
|
- fsps,clk-gating-host: GMM Clock Gating - Host
|
|
- fsps,clk-gating-partition: GMM Clock Gating - Partition
|
|
- fsps,clk-gating-trunk: Clock Gating - Trunk
|
|
- fsps,hda-enable: HD Audio Support
|
|
- fsps,dsp-enable: HD Audio DSP Support
|
|
- fsps,pme: Azalia wake-on-ring
|
|
- fsps,hd-audio-io-buffer-ownership: HD-Audio I/O Buffer Ownership
|
|
0: HD-Audio link owns all the I/O buffers (default)
|
|
1: HD-Audio link owns 4 I/O buffers and I2S port owns 4 I/O buffers
|
|
3: I2S port owns all the I/O buffers
|
|
- fsps,hd-audio-io-buffer-voltage: HD-Audio I/O Buffer Voltage
|
|
0: 3.3V (default)
|
|
1: 1.8V
|
|
- fsps,hd-audio-vc-type: HD-Audio Virtual Channel Type
|
|
0: VC0 (default)
|
|
1: VC1
|
|
- fsps,hd-audio-link-frequency: HD-Audio Link Frequency
|
|
0: 6MHz (default)
|
|
1: 12MHz
|
|
2: 24MHz
|
|
3: 48MHz
|
|
4: 96MHz
|
|
5: Invalid
|
|
- fsps,hd-audio-i-disp-link-frequency: HD-Audio iDisp-Link Frequency
|
|
0: 6MHz (default)
|
|
1: 12MHz
|
|
2: 24MHz
|
|
3: 48MHz
|
|
4: 96MHz
|
|
5: Invalid
|
|
- fsps,hd-audio-i-disp-link-tmode: HD-Audio iDisp-Link T-Mode
|
|
0: 2T (default)
|
|
1: 1T
|
|
- fsps,dsp-endpoint-dmic: HD-Audio Disp DMIC
|
|
0: disable,
|
|
1: 2ch array (default)
|
|
2: 4ch array
|
|
- fsps,dsp-endpoint-bluetooth: HD-Audio Bluetooth
|
|
- fsps,dsp-endpoint-i2s-skp: HD-Audio I2S SHK
|
|
- fsps,dsp-endpoint-i2s-hp: HD-Audio I2S HP
|
|
- fsps,audio-ctl-pwr-gate: HD-Audio Controller Power Gating (deprecated)
|
|
- fsps,audio-dsp-pwr-gate: HD-Audio ADSP Power Gating (deprecated)
|
|
- fsps,mmt: HD-Audio CSME Memory Transfers
|
|
0: VC0 (default)
|
|
1: VC2
|
|
- fsps,hmt: HD-Audio Host Memory Transfers
|
|
0: VC0 (default)
|
|
1: VC2
|
|
- fsps,hd-audio-pwr-gate: HD-Audio Power Gating
|
|
- fsps,hd-audio-clk-gate: HD-Audio Clock Gating
|
|
- fsps,dsp-feature-mask: Bitmask of DSP Feature
|
|
0x01: WoV
|
|
0x02: BT Sideband
|
|
0x04: Codec VAD
|
|
0x20: BT Intel HFP
|
|
0x40: BT Intel A2DP
|
|
0x80: DSP based speech pre-processing disabled
|
|
- fsps,dsp-pp-module-mask: Bitmask of supported DSP Post-Processing Modules
|
|
0x01: WoV
|
|
0x02: BT Sideband
|
|
0x04: Codec VAD
|
|
0x20: BT Intel HFP
|
|
0x40: BT Intel A2DP
|
|
0x80: DSP based speech pre-processing disabled
|
|
- fsps,bios-cfg-lock-down: HD-Audio BIOS Configuration Lock Down
|
|
- fsps,hpet: Enable High Precision Timer
|
|
- fsps,hpet-bdf-valid: Hpet Valid BDF Value
|
|
- fsps,hpet-bus-number: Bus Number of Hpet
|
|
0xFA: (default)
|
|
- fsps,hpet-device-number: Device Number of Hpet
|
|
0x1F: (default)
|
|
- fsps,hpet-function-number: Function Number of Hpet
|
|
0x00: (default)
|
|
- fsps,io-apic-bdf-valid: IoApic Valid BDF Value
|
|
- fsps,io-apic-bus-number: Bus Number of IoApic
|
|
0xFA: (default)
|
|
- fsps,io-apic-device-number: Device Number of IoApic
|
|
0x0F: (default)
|
|
- fsps,io-apic-function-number: Function Number of IoApic
|
|
0x00: (default)
|
|
- fsps,io-apic-entry24-119: IOAPIC Entry 24-119
|
|
- fsps,io-apic-id: IO APIC ID
|
|
0x01: (default)
|
|
- fsps,io-apic-range-select: IoApic Range
|
|
0x00: (default)
|
|
- fsps,ish-enable: ISH Controller
|
|
- fsps,bios-interface: BIOS Interface Lock Down
|
|
- fsps,bios-lock: Bios LockDown Enable
|
|
- fsps,spi-eiss: SPI EISS Status
|
|
- fsps,bios-lock-sw-smi-number: BiosLock SWSMI Number
|
|
0xA9: (default)
|
|
- fsps,lpss-s0ix-enable: LPSS IOSF PMCTL S0ix Enable
|
|
- fsps,i2c-clk-gate-cfg: LPSS I2C Clock Gating Configuration
|
|
- fsps,hsuart-clk-gate-cfg: LPSS HSUART Clock Gating Configuration
|
|
- fsps,spi-clk-gate-cfg: LPSS SPI Clock Gating Configuration
|
|
- fsps,i2cX-enable: 2C Device X
|
|
0: Disabled
|
|
1: PCI Mode (default)
|
|
2: ACPI Mode
|
|
- fsps,hsuartX-enable: UART Device X
|
|
0: Disabled
|
|
1: PCI Mode (default)
|
|
2: ACPI Mode
|
|
- fsps,spiX-enable: SPI UART Device X
|
|
0: Disabled
|
|
1: PCI Mode (default)
|
|
2: ACPI Mode
|
|
- fsps,os-dbg-enable: OS Debug Feature
|
|
- fsps,dci-en: DCI Feature
|
|
- fsps,uart2-kernel-debug-base-address: UART Debug Base Address
|
|
0x00000000: (default)
|
|
- fsps,pcie-clock-gating-disabled: Enable PCIE Clock Gating
|
|
- fsps,pcie-root-port8xh-decode: Enable PCIE Root Port 8xh Decode
|
|
- fsps,pcie8xh-decode-port-index: PCIE 8xh Decode Port Index
|
|
0x00: (default)
|
|
- fsps,pcie-root-port-peer-memory-write-enable: Enable PCIE Root Port Peer
|
|
Memory Write
|
|
- fsps,pcie-aspm-sw-smi-number: PCIE SWSMI Number
|
|
0xAA: (default)
|
|
- fsps,pcie-root-port-en: PCI Express Root Port
|
|
- fsps,pcie-rp-hide: Hide PCIE Root Port Configuration Space
|
|
- fsps,pcie-rp-slot-implemented: PCIE Root Port Slot Implement
|
|
- fsps,pcie-rp-hot-plug: Hot Plug
|
|
- fsps,pcie-rp-pm-sci: PCIE PM SCI
|
|
- fsps,pcie-rp-ext-sync: PCIE Root Port Extended Sync
|
|
- fsps,pcie-rp-transmitter-half-swing: Transmitter Half Swing
|
|
- fsps,pcie-rp-acs: ACS
|
|
- fsps,pcie-rp-clk-req-supported: Clock Request Support
|
|
- fsps,pcie-rp-clk-req-number: Configure CLKREQ Number
|
|
- fsps,pcie-rp-clk-req-detect: CLKREQ# Detection
|
|
- fsps,advanced-error-reportingt: Advanced Error Reporting
|
|
- fsps,pme-interrupt: PME Interrupt
|
|
- fsps,unsupported-request-report: URR
|
|
- fsps,fatal-error-report: FER
|
|
- fsps,no-fatal-error-report: NFER
|
|
- fsps,correctable-error-report: CER
|
|
- fsps,system-error-on-fatal-error: SEFE
|
|
- fsps,system-error-on-non-fatal-error: SENFE
|
|
- fsps,system-error-on-correctable-error: SECE
|
|
- fsps,pcie-rp-speed: PCIe Speed
|
|
- fsps,physical-slot-number: Physical Slot Number
|
|
0: Auto (default)
|
|
1: Gen1
|
|
2: Gen2
|
|
3: Gen3
|
|
- fsps,pcie-rp-completion-timeout: CTO
|
|
0x00, 0x01, 0x02, 0x03, 0x04, 0x05 (default)
|
|
- fsps,enable-ptm: PTM Support
|
|
- fsps,pcie-rp-aspm: ASPM
|
|
- fsps,pcie-rp-l1-substates: L1 Substates
|
|
- fsps,pcie-rp-ltr-enable: PCH PCIe LTR
|
|
- fsps,pcie-rp-ltr-config-lock: PCIE LTR Lock
|
|
- fsps,pme-b0-s5-di: PME_B0_S5 Disable bit
|
|
- fsps,pci-clock-run: PCI Clock Run
|
|
- fsps,timer8254-clk-setting: Enable/Disable Timer 8254 Clock Setting
|
|
- fsps,enable-sata: Chipset SATA
|
|
- fsps,sata-mode: SATA Mode Selection
|
|
0: AHCI (default)
|
|
1: RAID
|
|
- fsps,sata-salp-support: Aggressive LPM Support
|
|
- fsps,sata-pwr-opt-enable: SATA Power Optimization
|
|
- fsps,e-sata-speed-limit: eSATA Speed Limit
|
|
- fsps,speed-limit: SATA Speed Limit
|
|
0x1: 1.5Gb/s(Gen 1)
|
|
0x2: 3Gb/s(Gen 2)
|
|
0x3: 6Gb/s(Gen 3)
|
|
- fsps,sata-ports-enable: SATA Port
|
|
- fsps,sata-ports-dev-slp: SATA Port DevSlp
|
|
- fsps,sata-ports-hot-plug: SATA Port HotPlug
|
|
- fsps,sata-ports-interlock-sw: Mechanical Presence Switch
|
|
- fsps,sata-ports-external: External SATA Ports
|
|
- fsps,sata-ports-spin-up: Spin Up Device
|
|
- fsps,sata-ports-solid-state-drive: SATA Solid State
|
|
0: Hard Disk Drive (default)
|
|
1: Solid State Drive
|
|
- fsps,sata-ports-enable-dito-config: DITO Configuration
|
|
- fsps,sata-ports-dm-val: DM Value
|
|
0x0F: Maximum (default)
|
|
- fsps,sata-ports-dito-val: DITO Value
|
|
0x0271 (default)
|
|
- fsps,sub-system-vendor-id: Subsystem Vendor ID
|
|
0x8086: (default)
|
|
- fsps,sub-system-id: Subsystem ID
|
|
0x7270: (default)
|
|
- fsps,crid-setting: CRIDSettings
|
|
0: Disable (default)
|
|
1: CRID_1
|
|
2: CRID_2
|
|
3: CRID_3
|
|
- fsps,reset-select: ResetSelect
|
|
0x6: warm reset (default)
|
|
0xE: cold reset
|
|
- fsps,sdcard-enabled: SD Card Support (D27:F0)
|
|
- fsps,emmc-enabled: SeMMC Support (D28:F0)
|
|
- fsps,emmc-host-max-speed: eMMC Max Speed
|
|
0: HS400(default)
|
|
1: HS200
|
|
2: DDR50
|
|
- fsps,ufs-enabled: UFS Support (D29:F0)
|
|
- fsps,sdio-enabled: SDIO Support (D30:F0)
|
|
- fsps,gpp-lock: GPP Lock Feature
|
|
- fsps,sirq-enable: Serial IRQ
|
|
- fsps,sirq-mode: Serial IRQ Mode
|
|
0: Quiet mode (default)
|
|
1: Continuous mode
|
|
- fsps,start-frame-pulse: Start Frame Pulse Width
|
|
0: ScSfpw4Clk (default)
|
|
1: ScSfpw6Clk
|
|
2: ScSfpw8Clk
|
|
- fsps,smbus-enable: SMBus
|
|
- fsps,arp-enable: SMBus ARP Support
|
|
- fsps,num-rsvd-smbus-addresses: SMBus Table Elements
|
|
0x0080: (default)
|
|
- fsps,rsvd-smbus-address-table: Reserved SMBus Address Table
|
|
0x00: (default)
|
|
- fsps,disable-compliance-mode: XHCI Disable Compliance Mode
|
|
- fsps,usb-per-port-ctl: USB Per-Port Control
|
|
- fsps,usb30-mode: xHCI Mode
|
|
0: Disable
|
|
1: Enable
|
|
2: Auto (default)
|
|
- fsps,port-usb20-enable: Enable USB2 ports
|
|
- fsps,port-usb20-over-current-pin: USB20 Over Current Pin
|
|
- fsps,usb-otg: XDCI Support
|
|
0: Disable
|
|
1: PCI_Mode (default)
|
|
2: ACPI_mode
|
|
- fsps,hsic-support-enable: Enable XHCI HSIC Support
|
|
- fsps,port-usb30-enable: Enable USB3 ports
|
|
- fsps,port-usb30-over-current-pin: USB30 Over Current Pin
|
|
- fsps,ssic-port-enable: Enable XHCI SSIC Support
|
|
- fsps,dlane-pwr-gating: SSIC Dlane PowerGating
|
|
- fsps,vtd-enable: VT-d
|
|
- fsps,lock-down-global-smi: SMI Lock bit
|
|
- fsps,reset-wait-timer: HDAudio Delay Timer
|
|
0x012C: (default)
|
|
- fsps,rtc-lock: RTC Lock Bits
|
|
- fsps,sata-test-mode: SATA Test Mode Selection
|
|
- fsps,ssic-rate: XHCI SSIC RATE
|
|
1: A Series (default)
|
|
2: B Series
|
|
- fsps,dynamic-power-gating: SMBus Dynamic Power Gating
|
|
- fsps,pcie-rp-ltr-max-snoop-latency: Max Snoop Latency
|
|
0x0000: (default)
|
|
- fsps,pcie-rp-snoop-latency-override-mode: Snoop Latency Override
|
|
0: Disable
|
|
1: Enable
|
|
2: Auto (default)
|
|
- fsps,pcie-rp-snoop-latency-override-value: Snoop Latency Value
|
|
0x003C (default)
|
|
- fsps,pcie-rp-snoop-latency-override-multiplier: Snoop Latency Multiplier
|
|
0: 1ns
|
|
1: 32ns
|
|
2: 1024ns (default)
|
|
3: 32768ns
|
|
4: 1048576ns
|
|
5: 33554432ns
|
|
- fsps,skip-mp-init: Skip Multi-Processor Initialization
|
|
- fsps,dci-auto-detect: DCI Auto Detect
|
|
- fsps,pcie-rp-ltr-max-non-snoop-latency: Max Non-Snoop Latency
|
|
0x0000: (default)
|
|
- fsps,pcie-rp-non-snoop-latency-override-mode: Non Snoop Latency Override
|
|
- fsps,tco-timer-halt-lock: Halt and Lock TCO Timer
|
|
- fsps,pwr-btn-override-period: Power Button Override Period
|
|
000: 4s (default)
|
|
001: 6s
|
|
010: 8s
|
|
011: 10s
|
|
100: 12s
|
|
101: 14s
|
|
- fsps,pcie-rp-non-snoop-latency-override-value:
|
|
0x003C: (default)
|
|
- fsps,pcie-rp-non-snoop-latency-override-multiplier: Non Snoop Latency Value
|
|
0: 1ns
|
|
1: 32ns
|
|
2: 1024ns (default)
|
|
3: 32768ns
|
|
4: 1048576ns
|
|
5: 33554432ns
|
|
- fsps,pcie-rp-slot-power-limit-scale: PCIE Root Port Slot Power Limit Scale
|
|
0x00: (default)
|
|
- fsps,pcie-rp-slot-power-limit-value:
|
|
0x00: (default)
|
|
- fsps,disable-native-power-button: Power Button Native Mode Disable
|
|
- fsps,power-butter-debounce-mode: Power Button Debounce Mode
|
|
- fsps,sdio-tx-cmd-cntl: SDIO_TX_CMD_DLL_CNTL
|
|
0x505: (default)
|
|
- fsps,sdio-tx-data-cntl1: SDIO_TX_DATA_DLL_CNTL1
|
|
0xE: (default)
|
|
- fsps,sdio-tx-data-cntl2: SDIO_TX_DATA_DLL_CNTL2
|
|
0x22272828: (default)
|
|
- fsps,sdio-rx-cmd-data-cntl1: SDIO_RX_CMD_DATA_DLL_CNTL1
|
|
0x16161616: (default)
|
|
- fsps,sdio-rx-cmd-data-cntl2: SDIO_RX_CMD_DATA_DLL_CNTL2
|
|
0x10000: (default)
|
|
- fsps,sdcard-tx-cmd-cntl: SDCARD_TX_CMD_DLL_CNTL
|
|
0x505 (default)
|
|
- fsps,sdcard-tx-data-cntl1: SDCARD_TX_DATA_DLL_CNTL1
|
|
0xA13: (default)
|
|
- fsps,sdcard-tx-data-cntl2: SDCARD_TX_DATA_DLL_CNTL2
|
|
0x24242828: (default)
|
|
- fsps,sdcard-rx-cmd-data-cntl1: SDCARD_RX_CMD_DATA_DLL_CNTL1
|
|
0x73A3637 (default)
|
|
- fsps,sdcard-rx-strobe-cntl: SDCARD_RX_STROBE_DLL_CNTL
|
|
0x0: (default)
|
|
- fsps,sdcard-rx-cmd-data-cntl2: SDCARD_RX_CMD_DATA_DLL_CNTL2
|
|
0x10000: (default)
|
|
- fsps,emmc-tx-cmd-cntl: EMMC_TX_CMD_DLL_CNTL
|
|
0x505: (default)
|
|
- fsps,emmc-tx-data-cntl1: EMMC_TX_DATA_DLL_CNTL1
|
|
0xC11: (default)
|
|
- fsps,emmc-tx-data-cntl2: EMMC_TX_DATA_DLL_CNTL2
|
|
0x1C2A2927: (default)
|
|
- fsps,emmc-rx-cmd-data-cntl1: EMMC_RX_CMD_DATA_DLL_CNTL1
|
|
0x000D162F: (default)
|
|
- fsps,emmc-rx-strobe-cntl: EMMC_RX_STROBE_DLL_CNTL
|
|
0x0a0a: (default)
|
|
- fsps,emmc-rx-cmd-data-cntl2: EMMC_RX_CMD_DATA_DLL_CNTL2
|
|
0x1003b: (default)
|
|
- fsps,emmc-master-sw-cntl: EMMC_MASTER_DLL_CNTL
|
|
0x001: (default)
|
|
- fsps,pcie-rp-selectable-deemphasis: PCIe Selectable De-emphasis
|
|
1: -3.5 dB (default)
|
|
0: -6 dB
|
|
- fsps,monitor-mwait-enable: Monitor Mwait Enable
|
|
- fsps,hd-audio-dsp-uaa-compliance: Universal Audio Architecture
|
|
compliance for DSP enabled system
|
|
- fsps,ipc: IRQ Interrupt Polarity Control
|
|
- fsps,sata-ports-disable-dynamic-pg: Disable ModPHY dynamic power gate
|
|
- fsps,init-s3-cpu: Init CPU during S3 resume
|
|
- fsps,skip-punit-init: Skip P-unit Initialization
|
|
- fsps,port-usb20-per-port-tx-pe-half: PerPort Half Bit Pre-emphasis
|
|
- fsps,port-usb20-per-port-pe-txi-set: PerPort HS Pre-emphasis Bias
|
|
- fsps,port-usb20-per-port-txi-set: PerPort HS Transmitter Bias
|
|
- fsps,port-usb20-hs-skew-sel: Select the skew direction for HS transition
|
|
- fsps,port-usb20-i-usb-tx-emphasis-en: PerPort HS Transmitter Emphasis
|
|
- fsps,port-usb20-per-port-rxi-set: PerPort HS Receiver Bias
|
|
- fsps,port-usb20-hs-npre-drv-sel: Delay/skew's strength control for HS driver
|
|
- fsps,os-selection: OS Selection
|
|
0: Windows
|
|
1: Android
|
|
3: Linux
|
|
- fsps,dptf-enabled: DPTF
|
|
- fsps,pwm-enabled: PWM Enabled
|
|
|
|
Example:
|
|
|
|
&fsp_s {
|
|
bootph-some-ram;
|
|
|
|
fsps,ish-enable = <0>;
|
|
fsps,enable-sata = <0>;
|
|
fsps,pcie-root-port-en = [00 00 00 00 00 01];
|
|
fsps,pcie-rp-hot-plug = [00 00 00 00 00 01];
|
|
fsps,i2c6-enable = <I2CX_ENABLE_DISABLED>;
|
|
fsps,i2c7-enable = <I2CX_ENABLE_DISABLED>;
|
|
fsps,hsuart3-enable = <HSUARTX_ENABLE_DISABLED>;
|
|
fsps,spi1-enable = <SPIX_ENABLE_DISABLED>;
|
|
fsps,spi2-enable = <SPIX_ENABLE_DISABLED>;
|
|
fsps,sdio-enabled = <0>;
|
|
...
|
|
};
|