u-boot/doc/board/toradex/verdin-imx8mp.rst
Marcel Ziswiler 4d1fea9ad1 doc: board: toradex: minor documentation update
- Update SPDX-License-Identifier from obsolete GPL-2.0+ to
  GPL-2.0-or-later.
- Add links to product websites of SoM and carrier board where missing.
- Add information about update U-Boot wrapper where missing.
- Add sectionauthor where missing.
- Update information about imx-seco from version 3.7.4 to 3.8.1.
- Various minor grammatic and spelling fixes.
- Improve whitespace by adding or removing new lines.
- Change from code-block for output to just Output::.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-09-02 06:05:45 +02:00

114 lines
3.1 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0-or-later
.. sectionauthor:: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Verdin iMX8M Plus Module
========================
- SoM: https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus
- Carrier board: https://www.toradex.com/products/carrier-board/verdin-development-board-kit
Quick Start
-----------
- Build the ARM trusted firmware binary
- Get the DDR firmware
- Build U-Boot
- Flash to eMMC
- Boot
Get and Build the ARM Trusted Firmware (Trusted Firmware A)
-----------------------------------------------------------
.. code-block:: bash
$ echo "Downloading and building TF-A..."
$ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
$ cd trusted-firmware-a
Then build ATF (TF-A):
.. code-block:: bash
$ export CROSS_COMPILE=aarch64-linux-gnu-
$ make PLAT=imx8mp IMX_BOOT_UART_BASE=0x30880000 bl31
$ cp build/imx8mp/release/bl31.bin ../
Get the DDR Firmware
--------------------
.. code-block:: bash
$ cd ..
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.1.bin
$ chmod +x firmware-imx-8.10.1.bin
$ ./firmware-imx-8.10.1.bin
$ cp firmware-imx-8.10.1/firmware/ddr/synopsys/lpddr4*_202006.bin ./
Build U-Boot
------------
.. code-block:: bash
$ export CROSS_COMPILE=aarch64-linux-gnu-
$ make verdin-imx8mp_defconfig
$ make
Flash to eMMC
-------------
.. code-block:: bash
> tftpboot ${loadaddr} flash.bin
> setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
> mmc dev 2 1 && mmc write ${loadaddr} 0x0 ${blkcnt}
As a convenience, instead of the last two commands, one may also use the update
U-Boot wrapper:
.. code-block:: bash
> run update_uboot
Boot
----
ATF, U-Boot proper and u-boot.dtb images are packed into a FIT image,
which is loaded and parsed by SPL.
Boot sequence is:
* SPL ---> ATF (TF-A) ---> U-Boot proper
Output::
U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)
Quad die, dual rank failed, attempting dual die, single rank configuration.
Normal Boot
WDT: Started watchdog@30280000 with servicing (60s timeout)
Trying to boot from BOOTROM
Find img info 0x&48025a00, size 872
Need continue download 1024
Download 779264, Total size 780424
NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b
NOTICE: BL31: Built : 16:52:37, Aug 26 2021
U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)
CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz
Reset cause: POR
DRAM: 8 GiB
Core: 78 devices, 18 uclasses, devicetree: separate
WDT: Started watchdog@30280000 with servicing (60s timeout)
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In: serial
Out: serial
Err: serial
Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281
Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609
Setting variant to wifi
Net: Hard-coding pdata->enetaddr
eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME]
Hit any key to stop autoboot: 0
Verdin iMX8MP #