mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 13:14:27 +00:00
4d72caa5b9
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
1204 lines
31 KiB
C
1204 lines
31 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
|
|
*
|
|
* Author: Felipe Balbi <balbi@ti.com>
|
|
*
|
|
* Based on board/ti/dra7xx/evm.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <env.h>
|
|
#include <fdt_support.h>
|
|
#include <image.h>
|
|
#include <init.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <palmas.h>
|
|
#include <sata.h>
|
|
#include <serial.h>
|
|
#include <usb.h>
|
|
#include <errno.h>
|
|
#include <asm/omap_common.h>
|
|
#include <asm/omap_sec_common.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/dra7xx_iodelay.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/sata.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <usb.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <dwc3-uboot.h>
|
|
#include <dwc3-omap-uboot.h>
|
|
#include <ti-usb-phy-uboot.h>
|
|
#include <mmc.h>
|
|
#include <dm/uclass.h>
|
|
#include <hang.h>
|
|
|
|
#include "../common/board_detect.h"
|
|
#include "mux_data.h"
|
|
|
|
#ifdef CONFIG_SUPPORT_EMMC_BOOT
|
|
static int board_bootmode_has_emmc(void);
|
|
#endif
|
|
|
|
#define board_is_x15() board_ti_is("BBRDX15_")
|
|
#define board_is_x15_revb1() (board_ti_is("BBRDX15_") && \
|
|
!strncmp("B.10", board_ti_get_rev(), 3))
|
|
#define board_is_x15_revc() (board_ti_is("BBRDX15_") && \
|
|
!strncmp("C.00", board_ti_get_rev(), 3))
|
|
#define board_is_am572x_evm() board_ti_is("AM572PM_")
|
|
#define board_is_am572x_evm_reva3() \
|
|
(board_ti_is("AM572PM_") && \
|
|
!strncmp("A.30", board_ti_get_rev(), 3))
|
|
#define board_is_am574x_idk() board_ti_is("AM574IDK")
|
|
#define board_is_am572x_idk() board_ti_is("AM572IDK")
|
|
#define board_is_am571x_idk() board_ti_is("AM571IDK")
|
|
#define board_is_bbai() board_ti_is("BBONE-AI")
|
|
|
|
#ifdef CONFIG_DRIVER_TI_CPSW
|
|
#include <cpsw.h>
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define GPIO_ETH_LCD GPIO_TO_PIN(2, 22)
|
|
/* GPIO 7_11 */
|
|
#define GPIO_DDR_VTT_EN 203
|
|
|
|
/* Touch screen controller to identify the LCD */
|
|
#define OSD_TS_FT_BUS_ADDRESS 0
|
|
#define OSD_TS_FT_CHIP_ADDRESS 0x38
|
|
#define OSD_TS_FT_REG_ID 0xA3
|
|
/*
|
|
* Touchscreen IDs for various OSD panels
|
|
* Ref: http://www.osddisplays.com/TI/OSD101T2587-53TS_A.1.pdf
|
|
*/
|
|
/* Used on newer osd101t2587 Panels */
|
|
#define OSD_TS_FT_ID_5x46 0x54
|
|
/* Used on older osd101t2045 Panels */
|
|
#define OSD_TS_FT_ID_5606 0x08
|
|
|
|
#define SYSINFO_BOARD_NAME_MAX_LEN 45
|
|
|
|
#define TPS65903X_PRIMARY_SECONDARY_PAD2 0xFB
|
|
#define TPS65903X_PAD2_POWERHOLD_MASK 0x20
|
|
|
|
const struct omap_sysinfo sysinfo = {
|
|
"Board: UNKNOWN(BeagleBoard X15?) REV UNKNOWN\n"
|
|
};
|
|
|
|
static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
|
|
.dmm_lisa_map_3 = 0x80740300,
|
|
.is_ma_present = 0x1
|
|
};
|
|
|
|
static const struct dmm_lisa_map_regs am571x_idk_lisa_regs = {
|
|
.dmm_lisa_map_3 = 0x80640100,
|
|
.is_ma_present = 0x1
|
|
};
|
|
|
|
static const struct dmm_lisa_map_regs am574x_idk_lisa_regs = {
|
|
.dmm_lisa_map_2 = 0xc0600200,
|
|
.dmm_lisa_map_3 = 0x80600100,
|
|
.is_ma_present = 0x1
|
|
};
|
|
|
|
static const struct dmm_lisa_map_regs bbai_lisa_regs = {
|
|
.dmm_lisa_map_3 = 0x80640100,
|
|
.is_ma_present = 0x1
|
|
};
|
|
|
|
void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
|
|
{
|
|
if (board_is_am571x_idk())
|
|
*dmm_lisa_regs = &am571x_idk_lisa_regs;
|
|
else if (board_is_am574x_idk())
|
|
*dmm_lisa_regs = &am574x_idk_lisa_regs;
|
|
else if (board_is_bbai())
|
|
*dmm_lisa_regs = &bbai_lisa_regs;
|
|
else
|
|
*dmm_lisa_regs = &beagle_x15_lisa_regs;
|
|
}
|
|
|
|
static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = {
|
|
.sdram_config_init = 0x61851b32,
|
|
.sdram_config = 0x61851b32,
|
|
.sdram_config2 = 0x08000000,
|
|
.ref_ctrl = 0x000040F1,
|
|
.ref_ctrl_final = 0x00001035,
|
|
.sdram_tim1 = 0xcccf36ab,
|
|
.sdram_tim2 = 0x308f7fda,
|
|
.sdram_tim3 = 0x409f88a8,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x5007190b,
|
|
.temp_alert_config = 0x00000000,
|
|
.emif_ddr_phy_ctlr_1_init = 0x0024400b,
|
|
.emif_ddr_phy_ctlr_1 = 0x0e24400b,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00910091,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00950095,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x009b009b,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x009e009e,
|
|
.emif_rd_wr_lvl_rmp_win = 0x00000000,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
|
|
.emif_rd_wr_lvl_ctl = 0x00000000,
|
|
.emif_rd_wr_exec_thresh = 0x00000305
|
|
};
|
|
|
|
/* Ext phy ctrl regs 1-35 */
|
|
static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = {
|
|
0x10040100,
|
|
0x00910091,
|
|
0x00950095,
|
|
0x009B009B,
|
|
0x009E009E,
|
|
0x00980098,
|
|
0x00340034,
|
|
0x00350035,
|
|
0x00340034,
|
|
0x00310031,
|
|
0x00340034,
|
|
0x007F007F,
|
|
0x007F007F,
|
|
0x007F007F,
|
|
0x007F007F,
|
|
0x007F007F,
|
|
0x00480048,
|
|
0x004A004A,
|
|
0x00520052,
|
|
0x00550055,
|
|
0x00500050,
|
|
0x00000000,
|
|
0x00600020,
|
|
0x40011080,
|
|
0x08102040,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0
|
|
};
|
|
|
|
static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = {
|
|
.sdram_config_init = 0x61851b32,
|
|
.sdram_config = 0x61851b32,
|
|
.sdram_config2 = 0x08000000,
|
|
.ref_ctrl = 0x000040F1,
|
|
.ref_ctrl_final = 0x00001035,
|
|
.sdram_tim1 = 0xcccf36b3,
|
|
.sdram_tim2 = 0x308f7fda,
|
|
.sdram_tim3 = 0x407f88a8,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x5007190b,
|
|
.temp_alert_config = 0x00000000,
|
|
.emif_ddr_phy_ctlr_1_init = 0x0024400b,
|
|
.emif_ddr_phy_ctlr_1 = 0x0e24400b,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00910091,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00950095,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x009b009b,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x009e009e,
|
|
.emif_rd_wr_lvl_rmp_win = 0x00000000,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
|
|
.emif_rd_wr_lvl_ctl = 0x00000000,
|
|
.emif_rd_wr_exec_thresh = 0x00000305
|
|
};
|
|
|
|
static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = {
|
|
0x10040100,
|
|
0x00910091,
|
|
0x00950095,
|
|
0x009B009B,
|
|
0x009E009E,
|
|
0x00980098,
|
|
0x00340034,
|
|
0x00350035,
|
|
0x00340034,
|
|
0x00310031,
|
|
0x00340034,
|
|
0x007F007F,
|
|
0x007F007F,
|
|
0x007F007F,
|
|
0x007F007F,
|
|
0x007F007F,
|
|
0x00480048,
|
|
0x004A004A,
|
|
0x00520052,
|
|
0x00550055,
|
|
0x00500050,
|
|
0x00000000,
|
|
0x00600020,
|
|
0x40011080,
|
|
0x08102040,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0,
|
|
0x0
|
|
};
|
|
|
|
static const struct emif_regs am571x_emif1_ddr3_666mhz_emif_regs = {
|
|
.sdram_config_init = 0x61863332,
|
|
.sdram_config = 0x61863332,
|
|
.sdram_config2 = 0x08000000,
|
|
.ref_ctrl = 0x0000514d,
|
|
.ref_ctrl_final = 0x0000144a,
|
|
.sdram_tim1 = 0xd333887c,
|
|
.sdram_tim2 = 0x30b37fe3,
|
|
.sdram_tim3 = 0x409f8ad8,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x5007190b,
|
|
.temp_alert_config = 0x00000000,
|
|
.emif_ddr_phy_ctlr_1_init = 0x0024400f,
|
|
.emif_ddr_phy_ctlr_1 = 0x0e24400f,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00910091,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00950095,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x009b009b,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x009e009e,
|
|
.emif_rd_wr_lvl_rmp_win = 0x00000000,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
|
|
.emif_rd_wr_lvl_ctl = 0x00000000,
|
|
.emif_rd_wr_exec_thresh = 0x00000305
|
|
};
|
|
|
|
static const struct emif_regs am574x_emif1_ddr3_666mhz_emif_ecc_regs = {
|
|
.sdram_config_init = 0x61863332,
|
|
.sdram_config = 0x61863332,
|
|
.sdram_config2 = 0x08000000,
|
|
.ref_ctrl = 0x0000514d,
|
|
.ref_ctrl_final = 0x0000144a,
|
|
.sdram_tim1 = 0xd333887c,
|
|
.sdram_tim2 = 0x30b37fe3,
|
|
.sdram_tim3 = 0x409f8ad8,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x5007190b,
|
|
.temp_alert_config = 0x00000000,
|
|
.emif_ddr_phy_ctlr_1_init = 0x0024400f,
|
|
.emif_ddr_phy_ctlr_1 = 0x0e24400f,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00910091,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00950095,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x009b009b,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x009e009e,
|
|
.emif_rd_wr_lvl_rmp_win = 0x00000000,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
|
|
.emif_rd_wr_lvl_ctl = 0x00000000,
|
|
.emif_rd_wr_exec_thresh = 0x00000305,
|
|
.emif_ecc_ctrl_reg = 0xD0000001,
|
|
.emif_ecc_address_range_1 = 0x3FFF0000,
|
|
.emif_ecc_address_range_2 = 0x00000000
|
|
};
|
|
|
|
void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
|
|
{
|
|
switch (emif_nr) {
|
|
case 1:
|
|
if (board_is_am571x_idk())
|
|
*regs = &am571x_emif1_ddr3_666mhz_emif_regs;
|
|
else if (board_is_am574x_idk())
|
|
*regs = &am574x_emif1_ddr3_666mhz_emif_ecc_regs;
|
|
else
|
|
*regs = &beagle_x15_emif1_ddr3_532mhz_emif_regs;
|
|
break;
|
|
case 2:
|
|
if (board_is_am574x_idk())
|
|
*regs = &am571x_emif1_ddr3_666mhz_emif_regs;
|
|
else
|
|
*regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size)
|
|
{
|
|
switch (emif_nr) {
|
|
case 1:
|
|
*regs = beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs;
|
|
*size = ARRAY_SIZE(beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs);
|
|
break;
|
|
case 2:
|
|
*regs = beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs;
|
|
*size = ARRAY_SIZE(beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs);
|
|
break;
|
|
}
|
|
}
|
|
|
|
struct vcores_data beagle_x15_volts = {
|
|
.mpu.value[OPP_NOM] = VDD_MPU_DRA7_NOM,
|
|
.mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM,
|
|
.mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.mpu.addr = TPS659038_REG_ADDR_SMPS12,
|
|
.mpu.pmic = &tps659038,
|
|
.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
|
|
|
|
.eve.value[OPP_NOM] = VDD_EVE_DRA7_NOM,
|
|
.eve.value[OPP_OD] = VDD_EVE_DRA7_OD,
|
|
.eve.value[OPP_HIGH] = VDD_EVE_DRA7_HIGH,
|
|
.eve.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
|
|
.eve.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_DSPEVE_OD,
|
|
.eve.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_DSPEVE_HIGH,
|
|
.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.eve.addr = TPS659038_REG_ADDR_SMPS45,
|
|
.eve.pmic = &tps659038,
|
|
.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
|
|
|
|
.gpu.value[OPP_NOM] = VDD_GPU_DRA7_NOM,
|
|
.gpu.value[OPP_OD] = VDD_GPU_DRA7_OD,
|
|
.gpu.value[OPP_HIGH] = VDD_GPU_DRA7_HIGH,
|
|
.gpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_GPU_NOM,
|
|
.gpu.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_GPU_OD,
|
|
.gpu.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_GPU_HIGH,
|
|
.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.gpu.addr = TPS659038_REG_ADDR_SMPS45,
|
|
.gpu.pmic = &tps659038,
|
|
.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
|
|
|
|
.core.value[OPP_NOM] = VDD_CORE_DRA7_NOM,
|
|
.core.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_CORE_NOM,
|
|
.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.core.addr = TPS659038_REG_ADDR_SMPS6,
|
|
.core.pmic = &tps659038,
|
|
|
|
.iva.value[OPP_NOM] = VDD_IVA_DRA7_NOM,
|
|
.iva.value[OPP_OD] = VDD_IVA_DRA7_OD,
|
|
.iva.value[OPP_HIGH] = VDD_IVA_DRA7_HIGH,
|
|
.iva.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_IVA_NOM,
|
|
.iva.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_IVA_OD,
|
|
.iva.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_IVA_HIGH,
|
|
.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.iva.addr = TPS659038_REG_ADDR_SMPS45,
|
|
.iva.pmic = &tps659038,
|
|
.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
|
|
};
|
|
|
|
struct vcores_data am572x_idk_volts = {
|
|
.mpu.value[OPP_NOM] = VDD_MPU_DRA7_NOM,
|
|
.mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM,
|
|
.mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.mpu.addr = TPS659038_REG_ADDR_SMPS12,
|
|
.mpu.pmic = &tps659038,
|
|
.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
|
|
|
|
.eve.value[OPP_NOM] = VDD_EVE_DRA7_NOM,
|
|
.eve.value[OPP_OD] = VDD_EVE_DRA7_OD,
|
|
.eve.value[OPP_HIGH] = VDD_EVE_DRA7_HIGH,
|
|
.eve.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
|
|
.eve.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_DSPEVE_OD,
|
|
.eve.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_DSPEVE_HIGH,
|
|
.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.eve.addr = TPS659038_REG_ADDR_SMPS45,
|
|
.eve.pmic = &tps659038,
|
|
.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
|
|
|
|
.gpu.value[OPP_NOM] = VDD_GPU_DRA7_NOM,
|
|
.gpu.value[OPP_OD] = VDD_GPU_DRA7_OD,
|
|
.gpu.value[OPP_HIGH] = VDD_GPU_DRA7_HIGH,
|
|
.gpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_GPU_NOM,
|
|
.gpu.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_GPU_OD,
|
|
.gpu.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_GPU_HIGH,
|
|
.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.gpu.addr = TPS659038_REG_ADDR_SMPS6,
|
|
.gpu.pmic = &tps659038,
|
|
.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
|
|
|
|
.core.value[OPP_NOM] = VDD_CORE_DRA7_NOM,
|
|
.core.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_CORE_NOM,
|
|
.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.core.addr = TPS659038_REG_ADDR_SMPS7,
|
|
.core.pmic = &tps659038,
|
|
|
|
.iva.value[OPP_NOM] = VDD_IVA_DRA7_NOM,
|
|
.iva.value[OPP_OD] = VDD_IVA_DRA7_OD,
|
|
.iva.value[OPP_HIGH] = VDD_IVA_DRA7_HIGH,
|
|
.iva.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_IVA_NOM,
|
|
.iva.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_IVA_OD,
|
|
.iva.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_IVA_HIGH,
|
|
.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.iva.addr = TPS659038_REG_ADDR_SMPS8,
|
|
.iva.pmic = &tps659038,
|
|
.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
|
|
};
|
|
|
|
struct vcores_data am571x_idk_volts = {
|
|
.mpu.value[OPP_NOM] = VDD_MPU_DRA7_NOM,
|
|
.mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM,
|
|
.mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.mpu.addr = TPS659038_REG_ADDR_SMPS12,
|
|
.mpu.pmic = &tps659038,
|
|
.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
|
|
|
|
.eve.value[OPP_NOM] = VDD_EVE_DRA7_NOM,
|
|
.eve.value[OPP_OD] = VDD_EVE_DRA7_OD,
|
|
.eve.value[OPP_HIGH] = VDD_EVE_DRA7_HIGH,
|
|
.eve.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
|
|
.eve.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_DSPEVE_OD,
|
|
.eve.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_DSPEVE_HIGH,
|
|
.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.eve.addr = TPS659038_REG_ADDR_SMPS45,
|
|
.eve.pmic = &tps659038,
|
|
.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
|
|
|
|
.gpu.value[OPP_NOM] = VDD_GPU_DRA7_NOM,
|
|
.gpu.value[OPP_OD] = VDD_GPU_DRA7_OD,
|
|
.gpu.value[OPP_HIGH] = VDD_GPU_DRA7_HIGH,
|
|
.gpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_GPU_NOM,
|
|
.gpu.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_GPU_OD,
|
|
.gpu.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_GPU_HIGH,
|
|
.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.gpu.addr = TPS659038_REG_ADDR_SMPS6,
|
|
.gpu.pmic = &tps659038,
|
|
.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
|
|
|
|
.core.value[OPP_NOM] = VDD_CORE_DRA7_NOM,
|
|
.core.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_CORE_NOM,
|
|
.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.core.addr = TPS659038_REG_ADDR_SMPS7,
|
|
.core.pmic = &tps659038,
|
|
|
|
.iva.value[OPP_NOM] = VDD_IVA_DRA7_NOM,
|
|
.iva.value[OPP_OD] = VDD_IVA_DRA7_OD,
|
|
.iva.value[OPP_HIGH] = VDD_IVA_DRA7_HIGH,
|
|
.iva.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_IVA_NOM,
|
|
.iva.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_IVA_OD,
|
|
.iva.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_IVA_HIGH,
|
|
.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.iva.addr = TPS659038_REG_ADDR_SMPS45,
|
|
.iva.pmic = &tps659038,
|
|
.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
|
|
};
|
|
|
|
int get_voltrail_opp(int rail_offset)
|
|
{
|
|
int opp;
|
|
|
|
switch (rail_offset) {
|
|
case VOLT_MPU:
|
|
opp = DRA7_MPU_OPP;
|
|
break;
|
|
case VOLT_CORE:
|
|
opp = DRA7_CORE_OPP;
|
|
break;
|
|
case VOLT_GPU:
|
|
opp = DRA7_GPU_OPP;
|
|
break;
|
|
case VOLT_EVE:
|
|
opp = DRA7_DSPEVE_OPP;
|
|
break;
|
|
case VOLT_IVA:
|
|
opp = DRA7_IVA_OPP;
|
|
break;
|
|
default:
|
|
opp = OPP_NOM;
|
|
}
|
|
|
|
return opp;
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/* No env to setup for SPL */
|
|
static inline void setup_board_eeprom_env(void) { }
|
|
|
|
/* Override function to read eeprom information */
|
|
void do_board_detect(void)
|
|
{
|
|
int rc;
|
|
|
|
rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
|
|
CONFIG_EEPROM_CHIP_ADDRESS);
|
|
if (rc)
|
|
printf("ti_i2c_eeprom_init failed %d\n", rc);
|
|
|
|
#ifdef CONFIG_SUPPORT_EMMC_BOOT
|
|
rc = board_bootmode_has_emmc();
|
|
if (!rc)
|
|
rc = ti_emmc_boardid_get();
|
|
if (rc)
|
|
printf("ti_emmc_boardid_get failed %d\n", rc);
|
|
#endif
|
|
}
|
|
|
|
#else /* CONFIG_SPL_BUILD */
|
|
|
|
/* Override function to read eeprom information: actual i2c read done by SPL*/
|
|
void do_board_detect(void)
|
|
{
|
|
char *bname = NULL;
|
|
int rc;
|
|
|
|
rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
|
|
CONFIG_EEPROM_CHIP_ADDRESS);
|
|
if (rc)
|
|
printf("ti_i2c_eeprom_init failed %d\n", rc);
|
|
|
|
#ifdef CONFIG_SUPPORT_EMMC_BOOT
|
|
rc = board_bootmode_has_emmc();
|
|
if (!rc)
|
|
rc = ti_emmc_boardid_get();
|
|
if (rc)
|
|
printf("ti_emmc_boardid_get failed %d\n", rc);
|
|
#endif
|
|
|
|
if (board_is_x15())
|
|
bname = "BeagleBoard X15";
|
|
else if (board_is_am572x_evm())
|
|
bname = "AM572x EVM";
|
|
else if (board_is_am574x_idk())
|
|
bname = "AM574x IDK";
|
|
else if (board_is_am572x_idk())
|
|
bname = "AM572x IDK";
|
|
else if (board_is_am571x_idk())
|
|
bname = "AM571x IDK";
|
|
else if (board_is_bbai())
|
|
bname = "BeagleBone AI";
|
|
|
|
if (bname)
|
|
snprintf(sysinfo.board_string, SYSINFO_BOARD_NAME_MAX_LEN,
|
|
"Board: %s REV %s\n", bname, board_ti_get_rev());
|
|
}
|
|
|
|
static void setup_board_eeprom_env(void)
|
|
{
|
|
char *name = "beagle_x15";
|
|
int rc;
|
|
|
|
rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
|
|
CONFIG_EEPROM_CHIP_ADDRESS);
|
|
if (rc)
|
|
goto invalid_eeprom;
|
|
|
|
if (board_is_x15()) {
|
|
if (board_is_x15_revb1())
|
|
name = "beagle_x15_revb1";
|
|
else if (board_is_x15_revc())
|
|
name = "beagle_x15_revc";
|
|
else
|
|
name = "beagle_x15";
|
|
} else if (board_is_am572x_evm()) {
|
|
if (board_is_am572x_evm_reva3())
|
|
name = "am57xx_evm_reva3";
|
|
else
|
|
name = "am57xx_evm";
|
|
} else if (board_is_am574x_idk()) {
|
|
name = "am574x_idk";
|
|
} else if (board_is_am572x_idk()) {
|
|
name = "am572x_idk";
|
|
} else if (board_is_am571x_idk()) {
|
|
name = "am571x_idk";
|
|
} else if (board_is_bbai()) {
|
|
name = "am5729_beagleboneai";
|
|
} else {
|
|
printf("Unidentified board claims %s in eeprom header\n",
|
|
board_ti_get_name());
|
|
}
|
|
|
|
invalid_eeprom:
|
|
set_board_info_env(name);
|
|
}
|
|
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
void vcores_init(void)
|
|
{
|
|
if (board_is_am572x_idk() || board_is_am574x_idk())
|
|
*omap_vcores = &am572x_idk_volts;
|
|
else if (board_is_am571x_idk())
|
|
*omap_vcores = &am571x_idk_volts;
|
|
else
|
|
*omap_vcores = &beagle_x15_volts;
|
|
}
|
|
|
|
void hw_data_init(void)
|
|
{
|
|
*prcm = &dra7xx_prcm;
|
|
if (is_dra72x())
|
|
*dplls_data = &dra72x_dplls;
|
|
else if (is_dra76x())
|
|
*dplls_data = &dra76x_dplls;
|
|
else
|
|
*dplls_data = &dra7xx_dplls;
|
|
*ctrl = &dra7xx_ctrl;
|
|
}
|
|
|
|
bool am571x_idk_needs_lcd(void)
|
|
{
|
|
bool needs_lcd;
|
|
|
|
gpio_request(GPIO_ETH_LCD, "nLCD_Detect");
|
|
if (gpio_get_value(GPIO_ETH_LCD))
|
|
needs_lcd = false;
|
|
else
|
|
needs_lcd = true;
|
|
|
|
gpio_free(GPIO_ETH_LCD);
|
|
|
|
return needs_lcd;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
gpmc_init();
|
|
gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void am57x_idk_lcd_detect(void)
|
|
{
|
|
int r = -ENODEV;
|
|
char *idk_lcd = "no";
|
|
struct udevice *dev;
|
|
|
|
/* Only valid for IDKs */
|
|
if (board_is_x15() || board_is_am572x_evm() || board_is_bbai())
|
|
return;
|
|
|
|
/* Only AM571x IDK has gpio control detect.. so check that */
|
|
if (board_is_am571x_idk() && !am571x_idk_needs_lcd())
|
|
goto out;
|
|
|
|
r = i2c_get_chip_for_busnum(OSD_TS_FT_BUS_ADDRESS,
|
|
OSD_TS_FT_CHIP_ADDRESS, 1, &dev);
|
|
if (r) {
|
|
printf("%s: Failed to get I2C device %d/%d (ret %d)\n",
|
|
__func__, OSD_TS_FT_BUS_ADDRESS, OSD_TS_FT_CHIP_ADDRESS,
|
|
r);
|
|
/* AM572x IDK has no explicit settings for optional LCD kit */
|
|
if (board_is_am571x_idk())
|
|
printf("%s: Touch screen detect failed: %d!\n",
|
|
__func__, r);
|
|
goto out;
|
|
}
|
|
|
|
/* Read FT ID */
|
|
r = dm_i2c_reg_read(dev, OSD_TS_FT_REG_ID);
|
|
if (r < 0) {
|
|
printf("%s: Touch screen ID read %d:0x%02x[0x%02x] failed:%d\n",
|
|
__func__, OSD_TS_FT_BUS_ADDRESS, OSD_TS_FT_CHIP_ADDRESS,
|
|
OSD_TS_FT_REG_ID, r);
|
|
goto out;
|
|
}
|
|
|
|
switch (r) {
|
|
case OSD_TS_FT_ID_5606:
|
|
idk_lcd = "osd101t2045";
|
|
break;
|
|
case OSD_TS_FT_ID_5x46:
|
|
idk_lcd = "osd101t2587";
|
|
break;
|
|
default:
|
|
printf("%s: Unidentifed Touch screen ID 0x%02x\n",
|
|
__func__, r);
|
|
/* we will let default be "no lcd" */
|
|
}
|
|
out:
|
|
env_set("idk_lcd", idk_lcd);
|
|
|
|
/*
|
|
* On AM571x_IDK, no Display with J51 set to LCD is considered as an
|
|
* invalid configuration and we prevent boot to get user attention.
|
|
*/
|
|
if (board_is_am571x_idk() && am571x_idk_needs_lcd() &&
|
|
!strncmp(idk_lcd, "no", 2)) {
|
|
printf("%s: Invalid HW configuration: display not detected/supported but J51 is set. Remove J51 to boot without display.\n",
|
|
__func__);
|
|
hang();
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL)
|
|
static int device_okay(const char *path)
|
|
{
|
|
int node;
|
|
|
|
node = fdt_path_offset(gd->fdt_blob, path);
|
|
if (node < 0)
|
|
return 0;
|
|
|
|
return fdtdec_get_is_enabled(gd->fdt_blob, node);
|
|
}
|
|
#endif
|
|
|
|
int board_late_init(void)
|
|
{
|
|
setup_board_eeprom_env();
|
|
u8 val;
|
|
struct udevice *dev;
|
|
|
|
/*
|
|
* DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds
|
|
* This is the POWERHOLD-in-Low behavior.
|
|
*/
|
|
palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1);
|
|
|
|
/*
|
|
* Default FIT boot on HS devices. Non FIT images are not allowed
|
|
* on HS devices.
|
|
*/
|
|
if (get_device_type() == HS_DEVICE)
|
|
env_set("boot_fit", "1");
|
|
|
|
/*
|
|
* Set the GPIO7 Pad to POWERHOLD. This has higher priority
|
|
* over DEV_CTRL.DEV_ON bit. This can be reset in case of
|
|
* PMIC Power off. So to be on the safer side set it back
|
|
* to POWERHOLD mode irrespective of the current state.
|
|
*/
|
|
palmas_i2c_read_u8(TPS65903X_CHIP_P1, TPS65903X_PRIMARY_SECONDARY_PAD2,
|
|
&val);
|
|
val = val | TPS65903X_PAD2_POWERHOLD_MASK;
|
|
palmas_i2c_write_u8(TPS65903X_CHIP_P1, TPS65903X_PRIMARY_SECONDARY_PAD2,
|
|
val);
|
|
|
|
omap_die_id_serial();
|
|
omap_set_fastboot_vars();
|
|
|
|
am57x_idk_lcd_detect();
|
|
|
|
/* Just probe the potentially supported cdce913 device */
|
|
uclass_get_device(UCLASS_CLK, 0, &dev);
|
|
|
|
if (board_is_bbai())
|
|
env_set("console", "ttyS0,115200n8");
|
|
|
|
#if !defined(CONFIG_SPL_BUILD)
|
|
board_ti_set_ethaddr(2);
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL)
|
|
if (device_okay("/ocp/omap_dwc3_1@48880000"))
|
|
enable_usb_clocks(0);
|
|
if (device_okay("/ocp/omap_dwc3_2@488c0000"))
|
|
enable_usb_clocks(1);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
void set_muxconf_regs(void)
|
|
{
|
|
do_set_mux32((*ctrl)->control_padconf_core_base,
|
|
early_padconf, ARRAY_SIZE(early_padconf));
|
|
|
|
#ifdef CONFIG_SUPPORT_EMMC_BOOT
|
|
do_set_mux32((*ctrl)->control_padconf_core_base,
|
|
emmc_padconf, ARRAY_SIZE(emmc_padconf));
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_IODELAY_RECALIBRATION
|
|
void recalibrate_iodelay(void)
|
|
{
|
|
const struct pad_conf_entry *pconf;
|
|
const struct iodelay_cfg_entry *iod, *delta_iod;
|
|
int pconf_sz, iod_sz, delta_iod_sz = 0;
|
|
int ret;
|
|
|
|
if (board_is_am572x_idk()) {
|
|
pconf = core_padconf_array_essential_am572x_idk;
|
|
pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am572x_idk);
|
|
iod = iodelay_cfg_array_am572x_idk;
|
|
iod_sz = ARRAY_SIZE(iodelay_cfg_array_am572x_idk);
|
|
} else if (board_is_am574x_idk()) {
|
|
pconf = core_padconf_array_essential_am574x_idk;
|
|
pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am574x_idk);
|
|
iod = iodelay_cfg_array_am574x_idk;
|
|
iod_sz = ARRAY_SIZE(iodelay_cfg_array_am574x_idk);
|
|
} else if (board_is_am571x_idk()) {
|
|
pconf = core_padconf_array_essential_am571x_idk;
|
|
pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am571x_idk);
|
|
iod = iodelay_cfg_array_am571x_idk;
|
|
iod_sz = ARRAY_SIZE(iodelay_cfg_array_am571x_idk);
|
|
} else if (board_is_bbai()) {
|
|
pconf = core_padconf_array_essential_bbai;
|
|
pconf_sz = ARRAY_SIZE(core_padconf_array_essential_bbai);
|
|
iod = iodelay_cfg_array_bbai;
|
|
iod_sz = ARRAY_SIZE(iodelay_cfg_array_bbai);
|
|
} else {
|
|
/* Common for X15/GPEVM */
|
|
pconf = core_padconf_array_essential_x15;
|
|
pconf_sz = ARRAY_SIZE(core_padconf_array_essential_x15);
|
|
/* There never was an SR1.0 X15.. So.. */
|
|
if (omap_revision() == DRA752_ES1_1) {
|
|
iod = iodelay_cfg_array_x15_sr1_1;
|
|
iod_sz = ARRAY_SIZE(iodelay_cfg_array_x15_sr1_1);
|
|
} else {
|
|
/* Since full production should switch to SR2.0 */
|
|
iod = iodelay_cfg_array_x15_sr2_0;
|
|
iod_sz = ARRAY_SIZE(iodelay_cfg_array_x15_sr2_0);
|
|
}
|
|
}
|
|
|
|
/* Setup I/O isolation */
|
|
ret = __recalibrate_iodelay_start();
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Do the muxing here */
|
|
do_set_mux32((*ctrl)->control_padconf_core_base, pconf, pconf_sz);
|
|
|
|
/* Now do the weird minor deltas that should be safe */
|
|
if (board_is_x15() || board_is_am572x_evm()) {
|
|
if (board_is_x15_revb1() || board_is_am572x_evm_reva3() ||
|
|
board_is_x15_revc()) {
|
|
pconf = core_padconf_array_delta_x15_sr2_0;
|
|
pconf_sz = ARRAY_SIZE(core_padconf_array_delta_x15_sr2_0);
|
|
} else {
|
|
pconf = core_padconf_array_delta_x15_sr1_1;
|
|
pconf_sz = ARRAY_SIZE(core_padconf_array_delta_x15_sr1_1);
|
|
}
|
|
do_set_mux32((*ctrl)->control_padconf_core_base, pconf, pconf_sz);
|
|
}
|
|
|
|
if (board_is_am571x_idk()) {
|
|
if (am571x_idk_needs_lcd()) {
|
|
pconf = core_padconf_array_vout_am571x_idk;
|
|
pconf_sz = ARRAY_SIZE(core_padconf_array_vout_am571x_idk);
|
|
delta_iod = iodelay_cfg_array_am571x_idk_4port;
|
|
delta_iod_sz = ARRAY_SIZE(iodelay_cfg_array_am571x_idk_4port);
|
|
|
|
} else {
|
|
pconf = core_padconf_array_icss1eth_am571x_idk;
|
|
pconf_sz = ARRAY_SIZE(core_padconf_array_icss1eth_am571x_idk);
|
|
}
|
|
do_set_mux32((*ctrl)->control_padconf_core_base, pconf, pconf_sz);
|
|
}
|
|
|
|
/* Setup IOdelay configuration */
|
|
ret = do_set_iodelay((*ctrl)->iodelay_config_base, iod, iod_sz);
|
|
if (delta_iod_sz)
|
|
ret = do_set_iodelay((*ctrl)->iodelay_config_base, delta_iod,
|
|
delta_iod_sz);
|
|
|
|
err:
|
|
/* Closeup.. remove isolation */
|
|
__recalibrate_iodelay_end(ret);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MMC)
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
omap_mmc_init(0, 0, 0, -1, -1);
|
|
omap_mmc_init(1, 0, 0, -1, -1);
|
|
return 0;
|
|
}
|
|
|
|
static const struct mmc_platform_fixups am57x_es1_1_mmc1_fixups = {
|
|
.hw_rev = "rev11",
|
|
.unsupported_caps = MMC_CAP(MMC_HS_200) |
|
|
MMC_CAP(UHS_SDR104),
|
|
.max_freq = 96000000,
|
|
};
|
|
|
|
static const struct mmc_platform_fixups am57x_es1_1_mmc23_fixups = {
|
|
.hw_rev = "rev11",
|
|
.unsupported_caps = MMC_CAP(MMC_HS_200) |
|
|
MMC_CAP(UHS_SDR104) |
|
|
MMC_CAP(UHS_SDR50),
|
|
.max_freq = 48000000,
|
|
};
|
|
|
|
const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr)
|
|
{
|
|
switch (omap_revision()) {
|
|
case DRA752_ES1_0:
|
|
case DRA752_ES1_1:
|
|
if (addr == OMAP_HSMMC1_BASE)
|
|
return &am57x_es1_1_mmc1_fixups;
|
|
else
|
|
return &am57x_es1_1_mmc23_fixups;
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
|
|
int spl_start_uboot(void)
|
|
{
|
|
/* break into full u-boot on 'c' */
|
|
if (serial_tstc() && serial_getc() == 'c')
|
|
return 1;
|
|
|
|
#ifdef CONFIG_SPL_ENV_SUPPORT
|
|
env_init();
|
|
env_load();
|
|
if (env_get_yesno("boot_os") != 1)
|
|
return 1;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DRIVER_TI_CPSW
|
|
|
|
/* Delay value to add to calibrated value */
|
|
#define RGMII0_TXCTL_DLY_VAL ((0x3 << 5) + 0x8)
|
|
#define RGMII0_TXD0_DLY_VAL ((0x3 << 5) + 0x8)
|
|
#define RGMII0_TXD1_DLY_VAL ((0x3 << 5) + 0x2)
|
|
#define RGMII0_TXD2_DLY_VAL ((0x4 << 5) + 0x0)
|
|
#define RGMII0_TXD3_DLY_VAL ((0x4 << 5) + 0x0)
|
|
#define VIN2A_D13_DLY_VAL ((0x3 << 5) + 0x8)
|
|
#define VIN2A_D17_DLY_VAL ((0x3 << 5) + 0x8)
|
|
#define VIN2A_D16_DLY_VAL ((0x3 << 5) + 0x2)
|
|
#define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0)
|
|
#define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0)
|
|
|
|
static void cpsw_control(int enabled)
|
|
{
|
|
/* VTP can be added here */
|
|
}
|
|
|
|
static struct cpsw_slave_data cpsw_slaves[] = {
|
|
{
|
|
.slave_reg_ofs = 0x208,
|
|
.sliver_reg_ofs = 0xd80,
|
|
.phy_addr = 1,
|
|
},
|
|
{
|
|
.slave_reg_ofs = 0x308,
|
|
.sliver_reg_ofs = 0xdc0,
|
|
.phy_addr = 2,
|
|
},
|
|
};
|
|
|
|
static struct cpsw_platform_data cpsw_data = {
|
|
.mdio_base = CPSW_MDIO_BASE,
|
|
.cpsw_base = CPSW_BASE,
|
|
.mdio_div = 0xff,
|
|
.channels = 8,
|
|
.cpdma_reg_ofs = 0x800,
|
|
.slaves = 1,
|
|
.slave_data = cpsw_slaves,
|
|
.ale_reg_ofs = 0xd00,
|
|
.ale_entries = 1024,
|
|
.host_port_reg_ofs = 0x108,
|
|
.hw_stats_reg_ofs = 0x900,
|
|
.bd_ram_ofs = 0x2000,
|
|
.mac_control = (1 << 5),
|
|
.control = cpsw_control,
|
|
.host_port_num = 0,
|
|
.version = CPSW_CTRL_VERSION_2,
|
|
};
|
|
|
|
static u64 mac_to_u64(u8 mac[6])
|
|
{
|
|
int i;
|
|
u64 addr = 0;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
addr <<= 8;
|
|
addr |= mac[i];
|
|
}
|
|
|
|
return addr;
|
|
}
|
|
|
|
static void u64_to_mac(u64 addr, u8 mac[6])
|
|
{
|
|
mac[5] = addr;
|
|
mac[4] = addr >> 8;
|
|
mac[3] = addr >> 16;
|
|
mac[2] = addr >> 24;
|
|
mac[1] = addr >> 32;
|
|
mac[0] = addr >> 40;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int ret;
|
|
uint8_t mac_addr[6];
|
|
uint32_t mac_hi, mac_lo;
|
|
uint32_t ctrl_val;
|
|
int i;
|
|
u64 mac1, mac2;
|
|
u8 mac_addr1[6], mac_addr2[6];
|
|
int num_macs;
|
|
|
|
/* try reading mac address from efuse */
|
|
mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
|
|
mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
|
|
mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
|
|
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
|
|
mac_addr[2] = mac_hi & 0xFF;
|
|
mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
|
|
mac_addr[4] = (mac_lo & 0xFF00) >> 8;
|
|
mac_addr[5] = mac_lo & 0xFF;
|
|
|
|
if (!env_get("ethaddr")) {
|
|
printf("<ethaddr> not set. Validating first E-fuse MAC\n");
|
|
|
|
if (is_valid_ethaddr(mac_addr))
|
|
eth_env_set_enetaddr("ethaddr", mac_addr);
|
|
}
|
|
|
|
mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
|
|
mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
|
|
mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
|
|
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
|
|
mac_addr[2] = mac_hi & 0xFF;
|
|
mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
|
|
mac_addr[4] = (mac_lo & 0xFF00) >> 8;
|
|
mac_addr[5] = mac_lo & 0xFF;
|
|
|
|
if (!env_get("eth1addr")) {
|
|
if (is_valid_ethaddr(mac_addr))
|
|
eth_env_set_enetaddr("eth1addr", mac_addr);
|
|
}
|
|
|
|
ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
|
|
ctrl_val |= 0x22;
|
|
writel(ctrl_val, (*ctrl)->control_core_control_io1);
|
|
|
|
/* The phy address for the AM57xx IDK are different than x15 */
|
|
if (board_is_am572x_idk() || board_is_am571x_idk() ||
|
|
board_is_am574x_idk()) {
|
|
cpsw_data.slave_data[0].phy_addr = 0;
|
|
cpsw_data.slave_data[1].phy_addr = 1;
|
|
}
|
|
|
|
ret = cpsw_register(&cpsw_data);
|
|
if (ret < 0)
|
|
printf("Error %d registering CPSW switch\n", ret);
|
|
|
|
/*
|
|
* Export any Ethernet MAC addresses from EEPROM.
|
|
* On AM57xx the 2 MAC addresses define the address range
|
|
*/
|
|
board_ti_get_eth_mac_addr(0, mac_addr1);
|
|
board_ti_get_eth_mac_addr(1, mac_addr2);
|
|
|
|
if (is_valid_ethaddr(mac_addr1) && is_valid_ethaddr(mac_addr2)) {
|
|
mac1 = mac_to_u64(mac_addr1);
|
|
mac2 = mac_to_u64(mac_addr2);
|
|
|
|
/* must contain an address range */
|
|
num_macs = mac2 - mac1 + 1;
|
|
/* <= 50 to protect against user programming error */
|
|
if (num_macs > 0 && num_macs <= 50) {
|
|
for (i = 0; i < num_macs; i++) {
|
|
u64_to_mac(mac1 + i, mac_addr);
|
|
if (is_valid_ethaddr(mac_addr)) {
|
|
eth_env_set_enetaddr_by_index("eth",
|
|
i + 2,
|
|
mac_addr);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_BOARD_EARLY_INIT_F
|
|
/* VTT regulator enable */
|
|
static inline void vtt_regulator_enable(void)
|
|
{
|
|
if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
|
|
return;
|
|
|
|
gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
|
|
gpio_direction_output(GPIO_DDR_VTT_EN, 1);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
vtt_regulator_enable();
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPL_LOAD_FIT
|
|
int board_fit_config_name_match(const char *name)
|
|
{
|
|
if (board_is_x15()) {
|
|
if (board_is_x15_revb1()) {
|
|
if (!strcmp(name, "am57xx-beagle-x15-revb1"))
|
|
return 0;
|
|
} else if (board_is_x15_revc()) {
|
|
if (!strcmp(name, "am57xx-beagle-x15-revc"))
|
|
return 0;
|
|
} else if (!strcmp(name, "am57xx-beagle-x15")) {
|
|
return 0;
|
|
}
|
|
} else if (board_is_am572x_evm() &&
|
|
!strcmp(name, "am57xx-beagle-x15")) {
|
|
return 0;
|
|
} else if (board_is_am572x_idk() && !strcmp(name, "am572x-idk")) {
|
|
return 0;
|
|
} else if (board_is_am574x_idk() && !strcmp(name, "am574x-idk")) {
|
|
return 0;
|
|
} else if (board_is_am571x_idk() && !strcmp(name, "am571x-idk")) {
|
|
return 0;
|
|
} else if (board_is_bbai() && !strcmp(name, "am5729-beagleboneai")) {
|
|
return 0;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(FASTBOOT) && !CONFIG_IS_ENABLED(ENV_IS_NOWHERE)
|
|
int fastboot_set_reboot_flag(void)
|
|
{
|
|
printf("Setting reboot to fastboot flag ...\n");
|
|
env_set("dofastboot", "1");
|
|
env_save();
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SUPPORT_EMMC_BOOT
|
|
static int board_bootmode_has_emmc(void)
|
|
{
|
|
/* Check that boot mode is same as BBAI */
|
|
if (gd->arch.omap_boot_mode != 2)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_TI_SECURE_DEVICE
|
|
void board_fit_image_post_process(void **p_image, size_t *p_size)
|
|
{
|
|
secure_boot_verify_image(p_image, p_size);
|
|
}
|
|
|
|
void board_tee_image_process(ulong tee_image, size_t tee_size)
|
|
{
|
|
secure_tee_install((u32)tee_image);
|
|
}
|
|
|
|
U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_TEE, board_tee_image_process);
|
|
#endif
|