mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
351b9f5f95
Enable gpio driver on these boards. GPIOs can be used on any board. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
112 lines
2.5 KiB
Text
112 lines
2.5 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* dts file for Xilinx ZynqMP ZCU1275 RevB
|
|
*
|
|
* (C) Copyright 2018 - 2020, Xilinx, Inc.
|
|
*
|
|
* Michal Simek <michal.simek@xilinx.com>
|
|
* Siva Durga Prasad Paladugu <sivadur@xilinx.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "zynqmp.dtsi"
|
|
#include "zynqmp-clk-ccf.dtsi"
|
|
|
|
/ {
|
|
model = "ZynqMP ZCU1275 RevB";
|
|
compatible = "xlnx,zynqmp-zcu1275-revB", "xlnx,zynqmp-zcu1275",
|
|
"xlnx,zynqmp";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &dcc;
|
|
spi0 = &qspi;
|
|
mmc0 = &sdhci1;
|
|
ethernet0 = &gem1;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x80000000>;
|
|
};
|
|
};
|
|
|
|
&dcc {
|
|
status = "okay";
|
|
};
|
|
|
|
&gem1 {
|
|
status = "okay";
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy1: ethernet-phy@1 {
|
|
reg = <1>; /* KSZ9031RNXIC on AES-FMC-NETW1-G */
|
|
rxc-skew-ps = <1800>; /* Skew control of RX_CLK pad output */
|
|
txc-skew-ps = <1800>; /* Skew control of GTX_CLK pad input */
|
|
txen-skew-ps = <900>; /* Skew control of TX_CTL pad input */
|
|
rxdv-skew-ps = <0>; /* Skew control of RX_CTL pad output */
|
|
rxd0-skew-ps = <0>; /* Skew control of RXD0 pad output */
|
|
rxd1-skew-ps = <0>; /* Skew control of RXD1 pad output */
|
|
rxd2-skew-ps = <0>; /* Skew control of RXD2 pad output */
|
|
rxd3-skew-ps = <0>; /* Skew control of RXD3 pad output */
|
|
txd0-skew-ps = <900>; /* Skew control of TXD0 pad input */
|
|
txd1-skew-ps = <900>; /* Skew control of TXD1 pad input */
|
|
txd2-skew-ps = <900>; /* Skew control of TXD2 pad input */
|
|
txd3-skew-ps = <900>; /* Skew control of TXD3 pad input */
|
|
};
|
|
};
|
|
};
|
|
|
|
&gpio {
|
|
status = "okay";
|
|
};
|
|
|
|
&qspi {
|
|
status = "okay";
|
|
flash@0 {
|
|
compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x0>;
|
|
spi-tx-bus-width = <1>;
|
|
spi-rx-bus-width = <1>;
|
|
spi-max-frequency = <108000000>; /* Based on DC1 spec */
|
|
partition@0 { /* for testing purpose */
|
|
label = "qspi-fsbl-uboot";
|
|
reg = <0x0 0x100000>;
|
|
};
|
|
partition@100000 { /* for testing purpose */
|
|
label = "qspi-linux";
|
|
reg = <0x100000 0x500000>;
|
|
};
|
|
partition@600000 { /* for testing purpose */
|
|
label = "qspi-device-tree";
|
|
reg = <0x600000 0x20000>;
|
|
};
|
|
partition@620000 { /* for testing purpose */
|
|
label = "qspi-rootfs";
|
|
reg = <0x620000 0x5E0000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci1 {
|
|
status = "okay";
|
|
/*
|
|
* 1.0 revision has level shifter and this property should be
|
|
* removed for supporting UHS mode
|
|
*/
|
|
no-1-8-v;
|
|
xlnx,mio-bank = <1>;
|
|
};
|