u-boot/board/davedenx/qong/qong.c
Ilya Yanok 0d19f6c8cb qong: support for Dave/DENX QongEVB-LITE board
This patch adds support for Dave/DENX QongEVB-LITE i.MX31-based board.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-10 00:22:31 +01:00

168 lines
4.3 KiB
C

/*
*
* (c) 2009 Emcraft Systems, Ilya Yanok <yanok@emcraft.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
#include "qong_fpga.h"
DECLARE_GLOBAL_DATA_PTR;
int dram_init (void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = get_ram_size((volatile void *)PHYS_SDRAM_1,
PHYS_SDRAM_1_SIZE);
return 0;
}
int board_init (void)
{
/* Chip selects */
/* CS0: Nor Flash #0 - it must be init'ed when executing from DDR */
/* Assumptions: HCLK = 133 MHz, tACC = 130ns */
__REG(CSCR_U(0)) = ((0 << 31) | /* SP */
(0 << 30) | /* WP */
(0 << 28) | /* BCD */
(0 << 24) | /* BCS */
(0 << 22) | /* PSZ */
(0 << 21) | /* PME */
(0 << 20) | /* SYNC */
(0 << 16) | /* DOL */
(3 << 14) | /* CNC */
(21 << 8) | /* WSC */
(0 << 7) | /* EW */
(0 << 4) | /* WWS */
(6 << 0) /* EDC */
);
__REG(CSCR_L(0)) = ((2 << 28) | /* OEA */
(1 << 24) | /* OEN */
(3 << 20) | /* EBWA */
(3 << 16) | /* EBWN */
(1 << 12) | /* CSA */
(1 << 11) | /* EBC */
(5 << 8) | /* DSZ */
(1 << 4) | /* CSN */
(0 << 3) | /* PSR */
(0 << 2) | /* CRE */
(0 << 1) | /* WRAP */
(1 << 0) /* CSEN */
);
__REG(CSCR_A(0)) = ((2 << 28) | /* EBRA */
(1 << 24) | /* EBRN */
(2 << 20) | /* RWA */
(2 << 16) | /* RWN */
(0 << 15) | /* MUM */
(0 << 13) | /* LAH */
(2 << 10) | /* LBN */
(0 << 8) | /* LBA */
(0 << 6) | /* DWW */
(0 << 4) | /* DCT */
(0 << 3) | /* WWU */
(0 << 2) | /* AGE */
(0 << 1) | /* CNC2 */
(0 << 0) /* FCE */
);
#ifdef CONFIG_QONG_FPGA
/* CS1: FPGA/Network Controller/GPIO */
/* 16-bit, no DTACK */
__REG(CSCR_U(1)) = 0x00000A01;
__REG(CSCR_L(1)) = 0x20040501;
__REG(CSCR_A(1)) = 0x04020C00;
/* setup pins for FPGA */
mx31_gpio_mux(IOMUX_MODE(0x76, MUX_CTL_GPIO));
mx31_gpio_mux(IOMUX_MODE(0x7e, MUX_CTL_GPIO));
mx31_gpio_mux(IOMUX_MODE(0x91, MUX_CTL_OUT_FUNC | MUX_CTL_IN_GPIO));
mx31_gpio_mux(IOMUX_MODE(0x92, MUX_CTL_GPIO));
mx31_gpio_mux(IOMUX_MODE(0x93, MUX_CTL_GPIO));
#endif
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
/* board id for linux */
gd->bd->bi_arch_number = MACH_TYPE_QONG;
gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
return 0;
}
int checkboard (void)
{
printf("Board: DAVE/DENX QongEVB-LITE\n");
return 0;
}
int misc_init_r (void)
{
#ifdef CONFIG_QONG_FPGA
u32 tmp;
/* FPGA reset */
/* rstn = 0 */
tmp = __REG(GPIO2_BASE + GPIO_DR);
tmp &= (~(1 << QONG_FPGA_RST_PIN));
__REG(GPIO2_BASE + GPIO_DR) = tmp;
/* set the GPIO as output */
tmp = __REG(GPIO2_BASE + GPIO_GDIR);
tmp |= (1 << QONG_FPGA_RST_PIN);
__REG(GPIO2_BASE + GPIO_GDIR) = tmp;
/* wait */
udelay(30);
/* rstn = 1 */
tmp = __REG(GPIO2_BASE + GPIO_DR);
tmp |= (1 << QONG_FPGA_RST_PIN);
__REG(GPIO2_BASE + GPIO_DR) = tmp;
/* set interrupt pin as input */
__REG(GPIO2_BASE + GPIO_GDIR) = tmp | (1 << QONG_FPGA_IRQ_PIN);
/* wait while the FPGA starts */
udelay(300);
tmp = *(volatile u32*)QONG_FPGA_CTRL_VERSION;
printf("FPGA: ");
printf("version register = %u.%u.%u\n",
(tmp & 0xF000) >> 12, (tmp & 0x0F00) >> 8, tmp & 0x00FF);
#endif
return 0;
}
int board_eth_init(bd_t *bis)
{
#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_DNET)
return dnet_eth_initialize(0, (void *)CONFIG_DNET_BASE, -1);
#else
return 0;
#endif
}