mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-07 05:34:28 +00:00
5c2beda545
This patch allows uboot scripts make choices about where to boot from based on the active mmc boot partition. This allows having two copies of kernel, filesystems etc, and choosing which to boot from based off of the active bootloader partition. Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
215 lines
5.9 KiB
ReStructuredText
215 lines
5.9 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+:
|
|
|
|
mmc command
|
|
============
|
|
|
|
Synopsis
|
|
--------
|
|
|
|
::
|
|
|
|
mmc info
|
|
mmc read addr blk# cnt
|
|
mmc write addr blk# cnt
|
|
mmc erase blk# cnt
|
|
mmc rescan
|
|
mmc part
|
|
mmc dev [dev] [part]
|
|
mmc list
|
|
mmc wp
|
|
mmc bootbus <dev> <boot_bus_width> <reset_boot_bus_width> <boot_mode>
|
|
mmc bootpart-resize <dev> <dev part size MB> <RPMB part size MB>
|
|
mmc partconf <dev> [[varname] | [<boot_ack> <boot_partition> <partition_access>]]
|
|
mmc rst-function <dev> <value>
|
|
|
|
Description
|
|
-----------
|
|
|
|
The mmc command is used to control MMC(eMMC/SD) device.
|
|
|
|
The 'mmc info' command displays information (Manufacturer ID, OEM, Name, Bus Speed, Mode, ...) of MMC device.
|
|
|
|
The 'mmc read' command reads raw data to memory address from MMC device with block offset and count.
|
|
|
|
The 'mmc write' command writes raw data to MMC device from memory address with block offset and count.
|
|
|
|
addr
|
|
memory address
|
|
blk#
|
|
start block offset
|
|
cnt
|
|
block count
|
|
|
|
The 'mmc erase' command erases *cnt* blocks on the MMC device starting at block *blk#*.
|
|
|
|
blk#
|
|
start block offset
|
|
cnt
|
|
block count
|
|
|
|
The 'mmc rescan' command scans the available MMC device.
|
|
|
|
The 'mmc part' command displays the list available partition on current mmc device.
|
|
|
|
The 'mmc dev' command shows or set current mmc device.
|
|
|
|
dev
|
|
device number to change
|
|
part
|
|
partition number to change
|
|
|
|
The 'mmc list' command displays the list available devices.
|
|
|
|
The 'mmc wp' command enables "power on write protect" function for boot partitions.
|
|
|
|
The 'mmc bootbus' command sets the BOOT_BUS_WIDTH field. (*Refer to eMMC specification*)
|
|
|
|
boot_bus_width
|
|
0x0
|
|
x1 (sdr) or x4(ddr) buswidth in boot operation mode (default)
|
|
0x1
|
|
x4 (sdr/ddr) buswidth in boot operation mode
|
|
0x2
|
|
x8 (sdr/ddr) buswidth in boot operation mode
|
|
0x3
|
|
Reserved
|
|
|
|
reset_boot_bus_width
|
|
0x0
|
|
Reset buswidth to x1, Single data reate and backward compatible timing after boot operation (default)
|
|
0x1
|
|
Retain BOOT_BUS_WIDTH and BOOT_MODE value after boot operation. This is relevant to Push-pull mode operation only
|
|
|
|
boot_mode
|
|
0x0
|
|
Use single data rate + backward compatible timing in boot operation (default)
|
|
0x1
|
|
Use single data rate + High Speed timing in boot operation mode
|
|
0x2
|
|
Use dual data rate in boot operation
|
|
0x3
|
|
Reserved
|
|
|
|
The 'mmc partconf' command shows or changes PARTITION_CONFIG field.
|
|
|
|
varname
|
|
When showing the PARTITION_CONFIG, an optional environment variable to store the current boot_partition value into.
|
|
boot_ack
|
|
boot acknowledge value
|
|
boot_partition
|
|
boot partition to enable for boot
|
|
0x0
|
|
Device not boot enabled(default)
|
|
0x1
|
|
Boot partition1 enabled for boot
|
|
0x2
|
|
Boot partition2 enabled for boot
|
|
0x7
|
|
User area enabled for boot
|
|
others
|
|
Reserved
|
|
partition_access
|
|
partitions to access
|
|
|
|
The 'mmc bootpart-resize' command changes sizes of boot and RPMB partitions.
|
|
|
|
dev
|
|
device number
|
|
boot part size MB
|
|
target size of boot partition
|
|
RPMB part size MB
|
|
target size of RPMB partition
|
|
|
|
The 'mmc rst-function' command changes the RST_n_FUNCTION field.
|
|
**WARNING** : This is a write-once field. (*Refer to eMMC specification*)
|
|
|
|
value
|
|
0x0
|
|
RST_n signal is temporarily disabled (default)
|
|
0x1
|
|
RST_n signal is permanently enabled
|
|
0x2
|
|
RST_n signal is permanently disabled
|
|
0x3
|
|
Reserved
|
|
|
|
|
|
Examples
|
|
--------
|
|
|
|
The 'mmc info' command displays device's capabilities:
|
|
::
|
|
|
|
=> mmc info
|
|
Device: EXYNOS DWMMC
|
|
Manufacturer ID: 45
|
|
OEM: 100
|
|
Name: SDW16
|
|
Bus Speed: 52000000
|
|
Mode: MMC DDR52 (52MHz)
|
|
Rd Block Len: 512
|
|
MMC version 5.0
|
|
High Capacity: Yes
|
|
Capacity: 14.7 GiB
|
|
Bus Width: 8-bit DDR
|
|
Erase Group Size: 512 KiB
|
|
HC WP Group Size: 8 MiB
|
|
User Capacity: 14.7 GiB WRREL
|
|
Boot Capacity: 4 MiB ENH
|
|
RPMB Capacity: 4 MiB ENH
|
|
Boot area 0 is not write protected
|
|
Boot area 1 is not write protected
|
|
|
|
The raw data can be read/written via 'mmc read/write' command:
|
|
::
|
|
|
|
=> mmc read 0x40000000 0x5000 0x100
|
|
MMC read: dev # 0, block # 20480, count 256 ... 256 blocks read: OK
|
|
|
|
=> mmc write 0x40000000 0x5000 0x10
|
|
MMC write: dev # 0, block # 20480, count 256 ... 256 blocks written: OK
|
|
|
|
The partition list can be shown via 'mmc part' command:
|
|
::
|
|
|
|
=> mmc part
|
|
Partition Map for MMC device 0 -- Partition Type: DOS
|
|
|
|
Part Start Sector Num Sectors UUID Type
|
|
1 8192 131072 dff8751a-01 0e Boot
|
|
2 139264 6291456 dff8751a-02 83
|
|
3 6430720 1048576 dff8751a-03 83
|
|
4 7479296 23298048 dff8751a-04 05 Extd
|
|
5 7481344 307200 dff8751a-05 83
|
|
6 7790592 65536 dff8751a-06 83
|
|
7 7858176 16384 dff8751a-07 83
|
|
8 7876608 22900736 dff8751a-08 83
|
|
|
|
The current device can be shown or set via 'mmc dev' command:
|
|
::
|
|
|
|
=> mmc dev
|
|
switch to partitions #0, OK
|
|
mmc0(part0) is current device
|
|
=> mmc dev 2 0
|
|
switch to partitions #0, OK
|
|
mmc2 is current device
|
|
|
|
The list of available devices can be shown via 'mmc list' command:
|
|
::
|
|
|
|
=> mmc list
|
|
mmc list
|
|
EXYNOS DWMMC: 0 (eMMC)
|
|
EXYNOS DWMMC: 2 (SD)
|
|
|
|
Configuration
|
|
-------------
|
|
|
|
The mmc command is only available if CONFIG_CMD_MMC=y.
|
|
Some commands need to enable more configuration.
|
|
|
|
write, erase
|
|
CONFIG_MMC_WRITE
|
|
bootbus, bootpart-resize, partconf, rst-function
|
|
CONFIG_SUPPORT_EMMC_BOOT=y
|