u-boot/board/xes/common/fsl_8xxx_pci.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

71 lines
2 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2008 Extreme Engineering Solutions, Inc.
* Copyright 2007-2008 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <pci.h>
#include <asm/fsl_pci.h>
#include <asm/fsl_serdes.h>
#include <asm/io.h>
#include <linux/compiler.h>
#include <linux/libfdt.h>
#include <fdt_support.h>
#ifdef CONFIG_PCI1
static struct pci_controller pci1_hose;
#endif
void pci_init_board(void)
{
int first_free_busno = 0;
#ifdef CONFIG_PCI1
int pcie_ep;
struct fsl_pci_info pci_info;
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 devdisr = in_be32(&gur->devdisr);
uint pci_spd_norm = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_SPD;
uint pci_32 = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_PCI32;
uint pci_arb = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_ARB;
uint pcix = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1;
uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000;
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
SET_STD_PCI_INFO(pci_info, 1);
set_next_law(pci_info.mem_phys,
law_size_bits(pci_info.mem_size), pci_info.law);
set_next_law(pci_info.io_phys,
law_size_bits(pci_info.io_size), pci_info.law);
pcie_ep = fsl_setup_hose(&pci1_hose, pci_info.regs);
printf("PCI1: %d bit %s, %s %d MHz, %s, %s\n",
pci_32 ? 32 : 64,
pcix ? "PCIX" : "PCI",
pci_spd_norm ? ">=" : "<=",
pcix ? freq * 2 : freq,
pcie_ep ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter");
first_free_busno = fsl_pci_init_port(&pci_info,
&pci1_hose, first_free_busno);
} else {
printf("PCI1: disabled\n");
}
#elif defined CONFIG_ARCH_MPC8548
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
/* PCI1 not present on MPC8572 */
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1);
#endif
fsl_pcie_init_board(first_free_busno);
}
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_pci_setup(void *blob, bd_t *bd)
{
FT_FSL_PCI_SETUP;
}
#endif /* CONFIG_OF_BOARD_SETUP */