2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-13 23:02:59 +00:00
u-boot/arch/arm/mach-exynos/dmc_init_exynos4.c
Thomas Abraham 77b55e8cfc ARM: exynos: move SoC sources to mach-exynos
Move arch/arm/cpu/armv7/exynos/* to arch/arm/mach-exynos/* to allow
reuse of existing code for ARMv8 based Exynos platforms.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-08-17 13:06:52 +09:00

213 lines
5.9 KiB
C

/*
* Memory setup for board based on EXYNOS4210
*
* Copyright (C) 2013 Samsung Electronics
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <asm/arch/dmc.h>
#include "common_setup.h"
#include "exynos4_setup.h"
struct mem_timings mem = {
.direct_cmd_msr = {
DIRECT_CMD1, DIRECT_CMD2, DIRECT_CMD3, DIRECT_CMD4
},
.timingref = TIMINGREF_VAL,
.timingrow = TIMINGROW_VAL,
.timingdata = TIMINGDATA_VAL,
.timingpower = TIMINGPOWER_VAL,
.zqcontrol = ZQ_CONTROL_VAL,
.control0 = CONTROL0_VAL,
.control1 = CONTROL1_VAL,
.control2 = CONTROL2_VAL,
.concontrol = CONCONTROL_VAL,
.prechconfig = PRECHCONFIG,
.memcontrol = MEMCONTROL_VAL,
.memconfig0 = MEMCONFIG0_VAL,
.memconfig1 = MEMCONFIG1_VAL,
.dll_resync = FORCE_DLL_RESYNC,
.dll_on = DLL_CONTROL_ON,
};
static void phy_control_reset(int ctrl_no, struct exynos4_dmc *dmc)
{
if (ctrl_no) {
writel((mem.control1 | (1 << mem.dll_resync)),
&dmc->phycontrol1);
writel((mem.control1 | (0 << mem.dll_resync)),
&dmc->phycontrol1);
} else {
writel((mem.control0 | (0 << mem.dll_on)),
&dmc->phycontrol0);
writel((mem.control0 | (1 << mem.dll_on)),
&dmc->phycontrol0);
}
}
static void dmc_config_mrs(struct exynos4_dmc *dmc, int chip)
{
int i;
unsigned long mask = 0;
if (chip)
mask = DIRECT_CMD_CHIP1_SHIFT;
for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
writel(mem.direct_cmd_msr[i] | mask,
&dmc->directcmd);
}
}
static void dmc_init(struct exynos4_dmc *dmc)
{
/*
* DLL Parameter Setting:
* Termination: Enable R/W
* Phase Delay for DQS Cleaning: 180' Shift
*/
writel(mem.control1, &dmc->phycontrol1);
/*
* ZQ Calibration
* Termination: Disable
* Auto Calibration Start: Enable
*/
writel(mem.zqcontrol, &dmc->phyzqcontrol);
sdelay(0x100000);
/*
* Update DLL Information:
* Force DLL Resyncronization
*/
phy_control_reset(1, dmc);
phy_control_reset(0, dmc);
/* Set DLL Parameters */
writel(mem.control1, &dmc->phycontrol1);
/* DLL Start */
writel((mem.control0 | CTRL_START | CTRL_DLL_ON), &dmc->phycontrol0);
writel(mem.control2, &dmc->phycontrol2);
/* Set Clock Ratio of Bus clock to Memory Clock */
writel(mem.concontrol, &dmc->concontrol);
/*
* Memor Burst length: 8
* Number of chips: 2
* Memory Bus width: 32 bit
* Memory Type: DDR3
* Additional Latancy for PLL: 1 Cycle
*/
writel(mem.memcontrol, &dmc->memcontrol);
writel(mem.memconfig0, &dmc->memconfig0);
writel(mem.memconfig1, &dmc->memconfig1);
/* Config Precharge Policy */
writel(mem.prechconfig, &dmc->prechconfig);
/*
* TimingAref, TimingRow, TimingData, TimingPower Setting:
* Values as per Memory AC Parameters
*/
writel(mem.timingref, &dmc->timingref);
writel(mem.timingrow, &dmc->timingrow);
writel(mem.timingdata, &dmc->timingdata);
writel(mem.timingpower, &dmc->timingpower);
/* Chip0: NOP Command: Assert and Hold CKE to high level */
writel(DIRECT_CMD_NOP, &dmc->directcmd);
sdelay(0x100000);
/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
dmc_config_mrs(dmc, 0);
sdelay(0x100000);
/* Chip0: ZQINIT */
writel(DIRECT_CMD_ZQ, &dmc->directcmd);
sdelay(0x100000);
writel((DIRECT_CMD_NOP | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
sdelay(0x100000);
/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
dmc_config_mrs(dmc, 1);
sdelay(0x100000);
/* Chip1: ZQINIT */
writel((DIRECT_CMD_ZQ | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
sdelay(0x100000);
phy_control_reset(1, dmc);
sdelay(0x100000);
/* turn on DREX0, DREX1 */
writel((mem.concontrol | AREF_EN), &dmc->concontrol);
}
void mem_ctrl_init(int reset)
{
struct exynos4_dmc *dmc;
/*
* Async bridge configuration at CPU_core:
* 1: half_sync
* 0: full_sync
*/
writel(1, ASYNC_CONFIG);
#ifdef CONFIG_ORIGEN
/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
APB_SFR_INTERLEAVE_CONF_OFFSET);
/* Update MIU Configuration */
writel(APB_SFR_ARBRITATION_CONF_VAL, EXYNOS4_MIU_BASE +
APB_SFR_ARBRITATION_CONF_OFFSET);
#else
writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
APB_SFR_INTERLEAVE_CONF_OFFSET);
writel(INTERLEAVE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET);
writel(INTERLEAVE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET);
writel(INTERLEAVE_ADDR_MAP_EN, EXYNOS4_MIU_BASE +
ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
#ifdef CONFIG_MIU_LINEAR
writel(SLAVE0_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET);
writel(SLAVE0_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET);
writel(SLAVE1_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET);
writel(SLAVE1_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET);
writel(APB_SFR_SLV_ADDR_MAP_CONF_VAL, EXYNOS4_MIU_BASE +
ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
#endif
#endif
/* DREX0 */
dmc = (struct exynos4_dmc *)samsung_get_base_dmc_ctrl();
dmc_init(dmc);
dmc = (struct exynos4_dmc *)(samsung_get_base_dmc_ctrl()
+ DMC_OFFSET);
dmc_init(dmc);
}