u-boot/nand_spl/nand_boot_fsl_elbc.c
Matthew McClintock 6297454688 nand/spl: Assuming a static nand page size to reduce code size
Change variables to const to reduce code size, these values are
hardcoded via defines anyways so we might as well assume they
are constants

Signed-off-by: Matthew McClintock <msm@freescale.com>
cc: Scott Wood <scottwood@freescale.com>
2011-04-15 15:53:11 -05:00

152 lines
4.1 KiB
C

/*
* NAND boot for Freescale Enhanced Local Bus Controller, Flash Control Machine
*
* (C) Copyright 2006-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* Copyright (c) 2008 Freescale Semiconductor, Inc.
* Author: Scott Wood <scottwood@freescale.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/fsl_lbc.h>
#include <linux/mtd/nand.h>
#define WINDOW_SIZE 8192
static void nand_wait(void)
{
fsl_lbc_t *regs = LBC_BASE_ADDR;
for (;;) {
uint32_t status = in_be32(&regs->ltesr);
if (status == 1)
return;
if (status & 1) {
puts("read failed (ltesr)\n");
for (;;);
}
}
}
static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
{
fsl_lbc_t *regs = LBC_BASE_ADDR;
uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
const int large = CONFIG_SYS_NAND_OR_PRELIM & OR_FCM_PGS;
const int block_shift = large ? 17 : 14;
const int block_size = 1 << block_shift;
const int page_size = large ? 2048 : 512;
const int bad_marker = large ? page_size + 0 : page_size + 5;
int fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT) | 2;
int pos = 0;
if (offs & (block_size - 1)) {
puts("bad offset\n");
for (;;);
}
if (large) {
fmr |= FMR_ECCM;
out_be32(&regs->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
(NAND_CMD_READSTART << FCR_CMD1_SHIFT));
out_be32(&regs->fir,
(FIR_OP_CW0 << FIR_OP0_SHIFT) |
(FIR_OP_CA << FIR_OP1_SHIFT) |
(FIR_OP_PA << FIR_OP2_SHIFT) |
(FIR_OP_CW1 << FIR_OP3_SHIFT) |
(FIR_OP_RBW << FIR_OP4_SHIFT));
} else {
out_be32(&regs->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT);
out_be32(&regs->fir,
(FIR_OP_CW0 << FIR_OP0_SHIFT) |
(FIR_OP_CA << FIR_OP1_SHIFT) |
(FIR_OP_PA << FIR_OP2_SHIFT) |
(FIR_OP_RBW << FIR_OP3_SHIFT));
}
out_be32(&regs->fbcr, 0);
clrsetbits_be32(&regs->bank[0].br, BR_DECC, BR_DECC_CHK_GEN);
while (pos < uboot_size) {
int i = 0;
out_be32(&regs->fbar, offs >> block_shift);
do {
int j;
unsigned int page_offs = (offs & (block_size - 1)) << 1;
out_be32(&regs->ltesr, ~0);
out_be32(&regs->lteatr, 0);
out_be32(&regs->fpar, page_offs);
out_be32(&regs->fmr, fmr);
out_be32(&regs->lsor, 0);
nand_wait();
page_offs %= WINDOW_SIZE;
/*
* If either of the first two pages are marked bad,
* continue to the next block.
*/
if (i++ < 2 && buf[page_offs + bad_marker] != 0xff) {
puts("skipping\n");
offs = (offs + block_size) & ~(block_size - 1);
pos &= ~(block_size - 1);
break;
}
for (j = 0; j < page_size; j++)
dst[pos + j] = buf[page_offs + j];
pos += page_size;
offs += page_size;
} while ((offs & (block_size - 1)) && (pos < uboot_size));
}
}
/*
* The main entry for NAND booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
* from NAND into SDRAM and starts it from there.
*/
void nand_boot(void)
{
__attribute__((noreturn)) void (*uboot)(void);
/*
* Load U-Boot image from NAND into RAM
*/
nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
(uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
/*
* Jump to U-Boot image
*/
puts("transfering control\n");
/*
* Clean d-cache and invalidate i-cache, to
* make sure that no stale data is executed.
*/
flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
uboot();
}