u-boot/drivers/spi/atmel_dataflash_spi.c
Jens Scharsig 0cf0b93161 convert common files to new SoC access
* add's a warning to all files, which need update to new SoC access
 * convert common files in cpu/../at91 and a lot of drivers to use
   c stucture SoC access

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2010-02-12 12:31:55 -06:00

176 lines
5.6 KiB
C

/*
* Driver for ATMEL DataFlash support
* Author : Hamid Ikdoumi (Atmel)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <common.h>
#ifndef CONFIG_AT91_LEGACY
#define CONFIG_AT91_LEGACY
#warning Please update to use C structur SoC access !
#endif
#include <asm/arch/hardware.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/at91_spi.h>
#include <dataflash.h>
#define AT91_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */
#define AT91_SPI_PCS1_DATAFLASH_CARD 0xD /* Chip Select 1: NPCS1%1101 */
#define AT91_SPI_PCS2_DATAFLASH_CARD 0xB /* Chip Select 2: NPCS2%1011 */
#define AT91_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */
void AT91F_SpiInit(void)
{
/* Reset the SPI */
writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR);
/* Configure SPI in Master Mode with No CS selected !!! */
writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS,
AT91_BASE_SPI + AT91_SPI_MR);
/* Configure CS0 */
writel(AT91_SPI_NCPHA |
(AT91_SPI_DLYBS & DATAFLASH_TCSS) |
(AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
AT91_BASE_SPI + AT91_SPI_CSR(0));
#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1
/* Configure CS1 */
writel(AT91_SPI_NCPHA |
(AT91_SPI_DLYBS & DATAFLASH_TCSS) |
(AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
AT91_BASE_SPI + AT91_SPI_CSR(1));
#endif
#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS2
/* Configure CS2 */
writel(AT91_SPI_NCPHA |
(AT91_SPI_DLYBS & DATAFLASH_TCSS) |
(AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
AT91_BASE_SPI + AT91_SPI_CSR(2));
#endif
#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3
/* Configure CS3 */
writel(AT91_SPI_NCPHA |
(AT91_SPI_DLYBS & DATAFLASH_TCSS) |
(AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
AT91_BASE_SPI + AT91_SPI_CSR(3));
#endif
/* SPI_Enable */
writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR);
while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_SPIENS));
/*
* Add tempo to get SPI in a safe state.
* Should not be needed for new silicon (Rev B)
*/
udelay(500000);
readl(AT91_BASE_SPI + AT91_SPI_SR);
readl(AT91_BASE_SPI + AT91_SPI_RDR);
}
void AT91F_SpiEnable(int cs)
{
unsigned long mode;
switch (cs) {
case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */
mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
mode &= 0xFFF0FFFF;
writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
AT91_BASE_SPI + AT91_SPI_MR);
break;
case 1: /* Configure SPI CS1 for Serial DataFlash AT45DBxx */
mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
mode &= 0xFFF0FFFF;
writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
AT91_BASE_SPI + AT91_SPI_MR);
break;
case 2: /* Configure SPI CS2 for Serial DataFlash AT45DBxx */
mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
mode &= 0xFFF0FFFF;
writel(mode | ((AT91_SPI_PCS2_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
AT91_BASE_SPI + AT91_SPI_MR);
break;
case 3:
mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
mode &= 0xFFF0FFFF;
writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
AT91_BASE_SPI + AT91_SPI_MR);
break;
}
/* SPI_Enable */
writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR);
}
unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc);
unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
{
unsigned int timeout;
pDesc->state = BUSY;
writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
/* Initialize the Transmit and Receive Pointer */
writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR);
writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR);
/* Intialize the Transmit and Receive Counters */
writel(pDesc->rx_cmd_size, AT91_BASE_SPI + AT91_SPI_RCR);
writel(pDesc->tx_cmd_size, AT91_BASE_SPI + AT91_SPI_TCR);
if (pDesc->tx_data_size != 0) {
/* Initialize the Next Transmit and Next Receive Pointer */
writel((unsigned int)pDesc->rx_data_pt, AT91_BASE_SPI + AT91_SPI_RNPR);
writel((unsigned int)pDesc->tx_data_pt, AT91_BASE_SPI + AT91_SPI_TNPR);
/* Intialize the Next Transmit and Next Receive Counters */
writel(pDesc->rx_data_size, AT91_BASE_SPI + AT91_SPI_RNCR);
writel(pDesc->tx_data_size, AT91_BASE_SPI + AT91_SPI_TNCR);
}
/* arm simple, non interrupt dependent timer */
reset_timer_masked();
timeout = 0;
writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR);
while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) &&
((timeout = get_timer_masked()) < CONFIG_SYS_SPI_WRITE_TOUT));
writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
pDesc->state = IDLE;
if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT) {
printf("Error Timeout\n\r");
return DATAFLASH_ERROR;
}
return DATAFLASH_OK;
}