u-boot/arch/arm/dts/at91-sam9x60_curiosity.dts
Sergiu Moga 445ff8bb5a ARM: dts: sam9x60_curiosity: Add pinctrl and gpio properties for USB
Add the required pinctrl and gpio properties needed by the USB DT nodes
of the sam9x60_curiosity boards.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
2023-01-05 10:04:57 +02:00

112 lines
2.2 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* at91-sam9x60_curiosity.dts - Device Tree file for SAM9X60 CURIOSITY board
*
* Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
*
* Author: Durai Manickam KR <durai.manickamkr@microchip.com>
*/
/dts-v1/;
#include <dt-bindings/mfd/atmel-flexcom.h>
#include "sam9x60.dtsi"
/ {
model = "Microchip SAM9X60 CURIOSITY";
compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
ahb {
apb {
flx0: flexcom@f801c600 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
i2c@600 {
compatible = "atmel,sama5d2-i2c";
reg = <0x600 0x200>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
status = "okay";
eeprom@53 {
compatible = "atmel,24c32";
reg = <0x53>;
pagesize = <16>;
};
};
};
pinctrl {
pinctrl_flx0: flx0_default {
atmel,pins =
<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_onewire_tm_default: onewire_tm_default {
atmel,pins =
<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
};
usb1 {
pinctrl_usb_default: usb_default {
atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
};
};
};
chosen {
stdout-path = &dbgu;
i2c0 = &flx0;
};
clocks {
slow_xtal: slow_xtal {
clock-frequency = <32768>;
};
main_xtal: main_xtal {
clock-frequency = <24000000>;
};
};
memory {
reg = <0x20000000 0x8000000>;
};
onewire_tm: onewire {
gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_onewire_tm_default>;
status = "okay";
w1_eeprom: w1_eeprom@0 {
compatible = "maxim,ds24b33";
status = "okay";
};
};
};
&macb0 {
phy-mode = "rmii";
status = "okay";
};
&usb1 {
num-ports = <3>;
atmel,vbus-gpio = <0
&pioD 15 GPIO_ACTIVE_HIGH
&pioD 18 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};
&usb2 {
status = "okay";
};