mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 08:59:33 +00:00
8bddb9742b
At the moment all Allwinner DRAM initialisation routines are stored in arch/arm/mach-sunxi, even though those "drivers" are just a giant collection of writel's, without any architectural dependency. The R528/T113-s SoC (with ARM cores) and the D1/D1s Soc (with RISC-V cores) share the same die, so should share the same DRAM init routines as well. To prepare for this, add a new sunxi directory inside drivers/ram, and add some stub entries to prepare for the addition of the share DRAM code for those SoCs. The RISC-V D1(s) SoCs will probably use SPL_DM, so for that SoC this would be the right directory anyway. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
117 lines
4.1 KiB
Text
117 lines
4.1 KiB
Text
config RAM
|
|
bool "Enable RAM drivers using Driver Model"
|
|
depends on DM
|
|
help
|
|
This allows drivers to be provided for SDRAM and other RAM
|
|
controllers and their type to be specified in the board's device
|
|
tree. Generally some parameters are required to set up the RAM and
|
|
the RAM size can either be statically defined or dynamically
|
|
detected.
|
|
|
|
config SPL_RAM
|
|
bool "Enable RAM support in SPL"
|
|
depends on RAM && SPL_DM
|
|
help
|
|
The RAM subsystem adds a small amount of overhead to the image.
|
|
If this is acceptable and you have a need to use RAM drivers in
|
|
SPL, enable this option. It might provide a cleaner interface to
|
|
setting up RAM (e.g. SDRAM / DDR) within SPL.
|
|
|
|
config TPL_RAM
|
|
bool "Enable RAM support in TPL"
|
|
depends on RAM && TPL
|
|
help
|
|
The RAM subsystem adds a small amount of overhead to the image.
|
|
If this is acceptable and you have a need to use RAM drivers in
|
|
TPL, enable this option. It might provide a cleaner interface to
|
|
setting up RAM (e.g. SDRAM / DDR) within TPL.
|
|
|
|
config STM32_SDRAM
|
|
bool "Enable STM32 SDRAM support"
|
|
depends on RAM
|
|
help
|
|
STM32F7 family devices support flexible memory controller(FMC) to
|
|
support external memories like sdram, psram & nand.
|
|
This driver is for the sdram memory interface with the FMC.
|
|
|
|
config MPC83XX_SDRAM
|
|
bool "Enable MPC83XX SDRAM support"
|
|
depends on RAM
|
|
help
|
|
Enable support for the internal DDR Memory Controller of the MPC83xx
|
|
family of SoCs. Both static configurations, as well as configuring
|
|
the RAM through the use of SPD (Serial Presence Detect) is supported
|
|
via device tree settings.
|
|
|
|
config K3_AM654_DDRSS
|
|
bool "Enable AM654 DDRSS support"
|
|
depends on RAM && SOC_K3_AM654
|
|
help
|
|
K3 based AM654 devices has DDR memory subsystem that comprises
|
|
Synopys DDR controller, Synopsis DDR phy and wrapper logic to
|
|
intergrate these blocks into the device. This DDR subsystem
|
|
provides an interface to external SDRAM devices. Enabling this
|
|
config add support for the initialization of the external
|
|
SDRAM devices connected to DDR subsystem.
|
|
|
|
config K3_DDRSS
|
|
bool "Enable K3 DDRSS support"
|
|
depends on RAM
|
|
|
|
choice
|
|
depends on K3_DDRSS
|
|
prompt "K3 DDRSS Arch Support"
|
|
|
|
default K3_J721E_DDRSS if SOC_K3_J721E || SOC_K3_J721S2
|
|
default K3_AM64_DDRSS if SOC_K3_AM642
|
|
default K3_AM64_DDRSS if SOC_K3_AM625
|
|
default K3_AM62A_DDRSS if SOC_K3_AM62A7
|
|
|
|
config K3_J721E_DDRSS
|
|
bool "Enable J721E DDRSS support"
|
|
help
|
|
The J721E DDR subsystem comprises DDR controller, DDR PHY and
|
|
wrapper logic to integrate these blocks in the device. The DDR
|
|
subsystem is used to provide an interface to external SDRAM
|
|
devices which can be utilized for storing program or data.
|
|
Enabling this config adds support for the DDR memory controller
|
|
on J721E family of SoCs.
|
|
|
|
config K3_AM64_DDRSS
|
|
bool "Enable AM64 DDRSS support"
|
|
help
|
|
The AM64 DDR subsystem comprises DDR controller, DDR PHY and
|
|
wrapper logic to integrate these blocks in the device. The DDR
|
|
subsystem is used to provide an interface to external SDRAM
|
|
devices which can be utilized for storing program or data.
|
|
Enabling this config adds support for the DDR memory controller
|
|
on AM642 family of SoCs.
|
|
|
|
config K3_AM62A_DDRSS
|
|
bool "Enable AM62A DDRSS support"
|
|
help
|
|
The AM62A DDR subsystem comprises of a DDR controller, DDR PHY and
|
|
wrapper logic to integrate these blocks into once device. The DDR
|
|
subsystem is used to provide an interface to external SDRAM devices
|
|
which can be utilized for storing programs or any other data.
|
|
Enabling this option adds support for the DDR memory controller for
|
|
the AM62A family of SoCs.
|
|
|
|
endchoice
|
|
|
|
config IMXRT_SDRAM
|
|
bool "Enable i.MXRT SDRAM support"
|
|
depends on RAM
|
|
help
|
|
i.MXRT family devices support smart external memory controller(SEMC)
|
|
to support external memories like sdram, psram & nand.
|
|
This driver is for the sdram memory interface with the SEMC.
|
|
|
|
source "drivers/ram/aspeed/Kconfig"
|
|
source "drivers/ram/cadence/Kconfig"
|
|
source "drivers/ram/octeon/Kconfig"
|
|
source "drivers/ram/rockchip/Kconfig"
|
|
source "drivers/ram/sifive/Kconfig"
|
|
source "drivers/ram/stm32mp1/Kconfig"
|
|
source "drivers/ram/starfive/Kconfig"
|
|
source "drivers/ram/sunxi/Kconfig"
|