mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
a3ad3079c0
Create a man-page for the loady command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
67 lines
1.5 KiB
ReStructuredText
67 lines
1.5 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+:
|
|
|
|
loady command
|
|
=============
|
|
|
|
Synopsis
|
|
--------
|
|
|
|
::
|
|
|
|
loady [addr [baud]]
|
|
|
|
Description
|
|
-----------
|
|
|
|
The loady command is used to transfer a file to the device via the serial line
|
|
using the YMODEM protocol.
|
|
|
|
The number of transferred bytes is saved in environment variable filesize.
|
|
|
|
addr
|
|
load address, defaults to environment variable loadaddr or if loadaddr is
|
|
not set to configuration variable CONFIG_SYS_LOAD_ADDR
|
|
|
|
baud
|
|
baud rate for the ymodem transmission. After the transmission the baud
|
|
rate is reset to the original value.
|
|
|
|
Example
|
|
-------
|
|
|
|
In the example below the terminal emulation program picocom was used to
|
|
transfer a file to the device.
|
|
|
|
After entering the loady command the key sequence <CTRL-A><CTRL-S> is used to
|
|
let picocom prompt for the file name. Picocom invokes the program sz for the
|
|
file transfer.
|
|
|
|
::
|
|
|
|
=> loady 80064000 115200
|
|
## Ready for binary (ymodem) download to 0x80064000 at 115200 bps...
|
|
C
|
|
*** file: BOOTRISCV64.EFI
|
|
$ sz -b -vv BOOTRISCV64.EFI
|
|
Sending: BOOTRISCV64.EFI
|
|
Bytes Sent: 398976 BPS:7883
|
|
Sending:
|
|
Ymodem sectors/kbytes sent: 0/ 0k
|
|
Transfer complete
|
|
|
|
*** exit status: 0 ***
|
|
/1(CAN) packets, 4 retries
|
|
## Total Size = 0x0006165f = 398943 Bytes
|
|
=> echo ${filesize}
|
|
6165f
|
|
=>
|
|
|
|
Configuration
|
|
-------------
|
|
|
|
The command is only available if CONFIG_CMD_LOADB=y.
|
|
|
|
Return value
|
|
------------
|
|
|
|
The return value $? is always 0 (true).
|