u-boot/drivers/watchdog/rti_wdt.c
Jan Kiszka d388f360ed watchdog: Add support for K3 RTI watchdog
This is based on the Linux kernel driver for the RTI watchdog.

To actually reset the system on an AM65x, it requires firmware running
on the R5 that accepts the NMI and issues the actual system reset via
TISCI. Kind of an iTCO, except that this watchdog hardware has support
for no-way-out, and only for that.

On the J721E, reset works without extra firmware help when routing the
RTI interrupt via the ESM.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2020-08-11 10:18:27 +05:30

123 lines
2.5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) Siemens AG, 2020
*
* Authors:
* Jan Kiszka <jan.kiszka@siemens.com>
*
* Derived from linux/drivers/watchdog/rti_wdt.c
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <power-domain.h>
#include <wdt.h>
#include <asm/io.h>
/* Timer register set definition */
#define RTIDWDCTRL 0x90
#define RTIDWDPRLD 0x94
#define RTIWDSTATUS 0x98
#define RTIWDKEY 0x9c
#define RTIDWDCNTR 0xa0
#define RTIWWDRXCTRL 0xa4
#define RTIWWDSIZECTRL 0xa8
#define RTIWWDRX_NMI 0xa
#define RTIWWDSIZE_50P 0x50
#define WDENABLE_KEY 0xa98559da
#define WDKEY_SEQ0 0xe51a
#define WDKEY_SEQ1 0xa35c
#define WDT_PRELOAD_SHIFT 13
#define WDT_PRELOAD_MAX 0xfff
struct rti_wdt_priv {
phys_addr_t regs;
unsigned int clk_khz;
};
static int rti_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
{
struct rti_wdt_priv *priv = dev_get_priv(dev);
u32 timer_margin;
int ret;
if (readl(priv->regs + RTIDWDCTRL) == WDENABLE_KEY)
return -EBUSY;
timer_margin = timeout_ms * priv->clk_khz / 1000;
timer_margin >>= WDT_PRELOAD_SHIFT;
if (timer_margin > WDT_PRELOAD_MAX)
timer_margin = WDT_PRELOAD_MAX;
writel(timer_margin, priv->regs + RTIDWDPRLD);
writel(RTIWWDRX_NMI, priv->regs + RTIWWDRXCTRL);
writel(RTIWWDSIZE_50P, priv->regs + RTIWWDSIZECTRL);
readl(priv->regs + RTIWWDSIZECTRL);
writel(WDENABLE_KEY, priv->regs + RTIDWDCTRL);
return 0;
}
static int rti_wdt_reset(struct udevice *dev)
{
struct rti_wdt_priv *priv = dev_get_priv(dev);
u32 prld;
/* Make sure we do not reset too early */
prld = readl(priv->regs + RTIDWDPRLD) << WDT_PRELOAD_SHIFT;
if (readl(priv->regs + RTIDWDCNTR) >= prld / 2)
return -EPERM;
writel(WDKEY_SEQ0, priv->regs + RTIWDKEY);
writel(WDKEY_SEQ1, priv->regs + RTIWDKEY);
return 0;
}
static int rti_wdt_probe(struct udevice *dev)
{
struct rti_wdt_priv *priv = dev_get_priv(dev);
struct clk clk;
int ret;
priv->regs = devfdt_get_addr(dev);
if (!priv->regs)
return -EINVAL;
ret = clk_get_by_index(dev, 0, &clk);
if (ret)
return ret;
priv->clk_khz = clk_get_rate(&clk);
return 0;
}
static const struct wdt_ops rti_wdt_ops = {
.start = rti_wdt_start,
.reset = rti_wdt_reset,
};
static const struct udevice_id rti_wdt_ids[] = {
{ .compatible = "ti,j7-rti-wdt" },
{ }
};
U_BOOT_DRIVER(rti_wdt) = {
.name = "rti_wdt",
.id = UCLASS_WDT,
.of_match = rti_wdt_ids,
.ops = &rti_wdt_ops,
.probe = rti_wdt_probe,
.priv_auto_alloc_size = sizeof(struct rti_wdt_priv),
.flags = DM_FLAG_REMOVE_WITH_PD_ON,
};