mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
2fd2489b7a
Add missing header. Warnings: drivers/net/zynq_gem.c:491:5: warning: symbol 'zynq_gem_initialize' was not declared. Should it be static? drivers/net/zynq_gem.c:542:5: warning: symbol 'zynq_gem_of_init' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com>
580 lines
15 KiB
C
580 lines
15 KiB
C
/*
|
|
* (C) Copyright 2011 Michal Simek
|
|
*
|
|
* Michal SIMEK <monstr@monstr.eu>
|
|
*
|
|
* Based on Xilinx gmac driver:
|
|
* (C) Copyright 2011 Xilinx
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <config.h>
|
|
#include <fdtdec.h>
|
|
#include <libfdt.h>
|
|
#include <malloc.h>
|
|
#include <asm/io.h>
|
|
#include <phy.h>
|
|
#include <miiphy.h>
|
|
#include <watchdog.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#if !defined(CONFIG_PHYLIB)
|
|
# error XILINX_GEM_ETHERNET requires PHYLIB
|
|
#endif
|
|
|
|
/* Bit/mask specification */
|
|
#define ZYNQ_GEM_PHYMNTNC_OP_MASK 0x40020000 /* operation mask bits */
|
|
#define ZYNQ_GEM_PHYMNTNC_OP_R_MASK 0x20000000 /* read operation */
|
|
#define ZYNQ_GEM_PHYMNTNC_OP_W_MASK 0x10000000 /* write operation */
|
|
#define ZYNQ_GEM_PHYMNTNC_PHYAD_SHIFT_MASK 23 /* Shift bits for PHYAD */
|
|
#define ZYNQ_GEM_PHYMNTNC_PHREG_SHIFT_MASK 18 /* Shift bits for PHREG */
|
|
|
|
#define ZYNQ_GEM_RXBUF_EOF_MASK 0x00008000 /* End of frame. */
|
|
#define ZYNQ_GEM_RXBUF_SOF_MASK 0x00004000 /* Start of frame. */
|
|
#define ZYNQ_GEM_RXBUF_LEN_MASK 0x00003FFF /* Mask for length field */
|
|
|
|
#define ZYNQ_GEM_RXBUF_WRAP_MASK 0x00000002 /* Wrap bit, last BD */
|
|
#define ZYNQ_GEM_RXBUF_NEW_MASK 0x00000001 /* Used bit.. */
|
|
#define ZYNQ_GEM_RXBUF_ADD_MASK 0xFFFFFFFC /* Mask for address */
|
|
|
|
/* Wrap bit, last descriptor */
|
|
#define ZYNQ_GEM_TXBUF_WRAP_MASK 0x40000000
|
|
#define ZYNQ_GEM_TXBUF_LAST_MASK 0x00008000 /* Last buffer */
|
|
|
|
#define ZYNQ_GEM_NWCTRL_TXEN_MASK 0x00000008 /* Enable transmit */
|
|
#define ZYNQ_GEM_NWCTRL_RXEN_MASK 0x00000004 /* Enable receive */
|
|
#define ZYNQ_GEM_NWCTRL_MDEN_MASK 0x00000010 /* Enable MDIO port */
|
|
#define ZYNQ_GEM_NWCTRL_STARTTX_MASK 0x00000200 /* Start tx (tx_go) */
|
|
|
|
#define ZYNQ_GEM_NWCFG_SPEED100 0x000000001 /* 100 Mbps operation */
|
|
#define ZYNQ_GEM_NWCFG_SPEED1000 0x000000400 /* 1Gbps operation */
|
|
#define ZYNQ_GEM_NWCFG_FDEN 0x000000002 /* Full Duplex mode */
|
|
#define ZYNQ_GEM_NWCFG_FSREM 0x000020000 /* FCS removal */
|
|
#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x000080000 /* Div pclk by 32, 80MHz */
|
|
#define ZYNQ_GEM_NWCFG_MDCCLKDIV2 0x0000c0000 /* Div pclk by 48, 120MHz */
|
|
|
|
#define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_NWCFG_FDEN | \
|
|
ZYNQ_GEM_NWCFG_FSREM | \
|
|
ZYNQ_GEM_NWCFG_MDCCLKDIV)
|
|
|
|
#define ZYNQ_GEM_NWSR_MDIOIDLE_MASK 0x00000004 /* PHY management idle */
|
|
|
|
#define ZYNQ_GEM_DMACR_BLENGTH 0x00000004 /* INCR4 AHB bursts */
|
|
/* Use full configured addressable space (8 Kb) */
|
|
#define ZYNQ_GEM_DMACR_RXSIZE 0x00000300
|
|
/* Use full configured addressable space (4 Kb) */
|
|
#define ZYNQ_GEM_DMACR_TXSIZE 0x00000400
|
|
/* Set with binary 00011000 to use 1536 byte(1*max length frame/buffer) */
|
|
#define ZYNQ_GEM_DMACR_RXBUF 0x00180000
|
|
|
|
#define ZYNQ_GEM_DMACR_INIT (ZYNQ_GEM_DMACR_BLENGTH | \
|
|
ZYNQ_GEM_DMACR_RXSIZE | \
|
|
ZYNQ_GEM_DMACR_TXSIZE | \
|
|
ZYNQ_GEM_DMACR_RXBUF)
|
|
|
|
/* Use MII register 1 (MII status register) to detect PHY */
|
|
#define PHY_DETECT_REG 1
|
|
|
|
/* Mask used to verify certain PHY features (or register contents)
|
|
* in the register above:
|
|
* 0x1000: 10Mbps full duplex support
|
|
* 0x0800: 10Mbps half duplex support
|
|
* 0x0008: Auto-negotiation support
|
|
*/
|
|
#define PHY_DETECT_MASK 0x1808
|
|
|
|
/* TX BD status masks */
|
|
#define ZYNQ_GEM_TXBUF_FRMLEN_MASK 0x000007ff
|
|
#define ZYNQ_GEM_TXBUF_EXHAUSTED 0x08000000
|
|
#define ZYNQ_GEM_TXBUF_UNDERRUN 0x10000000
|
|
|
|
/* Clock frequencies for different speeds */
|
|
#define ZYNQ_GEM_FREQUENCY_10 2500000UL
|
|
#define ZYNQ_GEM_FREQUENCY_100 25000000UL
|
|
#define ZYNQ_GEM_FREQUENCY_1000 125000000UL
|
|
|
|
/* Device registers */
|
|
struct zynq_gem_regs {
|
|
u32 nwctrl; /* Network Control reg */
|
|
u32 nwcfg; /* Network Config reg */
|
|
u32 nwsr; /* Network Status reg */
|
|
u32 reserved1;
|
|
u32 dmacr; /* DMA Control reg */
|
|
u32 txsr; /* TX Status reg */
|
|
u32 rxqbase; /* RX Q Base address reg */
|
|
u32 txqbase; /* TX Q Base address reg */
|
|
u32 rxsr; /* RX Status reg */
|
|
u32 reserved2[2];
|
|
u32 idr; /* Interrupt Disable reg */
|
|
u32 reserved3;
|
|
u32 phymntnc; /* Phy Maintaince reg */
|
|
u32 reserved4[18];
|
|
u32 hashl; /* Hash Low address reg */
|
|
u32 hashh; /* Hash High address reg */
|
|
#define LADDR_LOW 0
|
|
#define LADDR_HIGH 1
|
|
u32 laddr[4][LADDR_HIGH + 1]; /* Specific1 addr low/high reg */
|
|
u32 match[4]; /* Type ID1 Match reg */
|
|
u32 reserved6[18];
|
|
u32 stat[44]; /* Octects transmitted Low reg - stat start */
|
|
};
|
|
|
|
/* BD descriptors */
|
|
struct emac_bd {
|
|
u32 addr; /* Next descriptor pointer */
|
|
u32 status;
|
|
};
|
|
|
|
#define RX_BUF 3
|
|
/* Page table entries are set to 1MB, or multiples of 1MB
|
|
* (not < 1MB). driver uses less bd's so use 1MB bdspace.
|
|
*/
|
|
#define BD_SPACE 0x100000
|
|
/* BD separation space */
|
|
#define BD_SEPRN_SPACE 64
|
|
|
|
/* Initialized, rxbd_current, rx_first_buf must be 0 after init */
|
|
struct zynq_gem_priv {
|
|
struct emac_bd *tx_bd;
|
|
struct emac_bd *rx_bd;
|
|
char *rxbuffers;
|
|
u32 rxbd_current;
|
|
u32 rx_first_buf;
|
|
int phyaddr;
|
|
u32 emio;
|
|
int init;
|
|
struct phy_device *phydev;
|
|
struct mii_dev *bus;
|
|
};
|
|
|
|
static inline int mdio_wait(struct eth_device *dev)
|
|
{
|
|
struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
|
|
u32 timeout = 200;
|
|
|
|
/* Wait till MDIO interface is ready to accept a new transaction. */
|
|
while (--timeout) {
|
|
if (readl(®s->nwsr) & ZYNQ_GEM_NWSR_MDIOIDLE_MASK)
|
|
break;
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
if (!timeout) {
|
|
printf("%s: Timeout\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 phy_setup_op(struct eth_device *dev, u32 phy_addr, u32 regnum,
|
|
u32 op, u16 *data)
|
|
{
|
|
u32 mgtcr;
|
|
struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
|
|
|
|
if (mdio_wait(dev))
|
|
return 1;
|
|
|
|
/* Construct mgtcr mask for the operation */
|
|
mgtcr = ZYNQ_GEM_PHYMNTNC_OP_MASK | op |
|
|
(phy_addr << ZYNQ_GEM_PHYMNTNC_PHYAD_SHIFT_MASK) |
|
|
(regnum << ZYNQ_GEM_PHYMNTNC_PHREG_SHIFT_MASK) | *data;
|
|
|
|
/* Write mgtcr and wait for completion */
|
|
writel(mgtcr, ®s->phymntnc);
|
|
|
|
if (mdio_wait(dev))
|
|
return 1;
|
|
|
|
if (op == ZYNQ_GEM_PHYMNTNC_OP_R_MASK)
|
|
*data = readl(®s->phymntnc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 phyread(struct eth_device *dev, u32 phy_addr, u32 regnum, u16 *val)
|
|
{
|
|
return phy_setup_op(dev, phy_addr, regnum,
|
|
ZYNQ_GEM_PHYMNTNC_OP_R_MASK, val);
|
|
}
|
|
|
|
static u32 phywrite(struct eth_device *dev, u32 phy_addr, u32 regnum, u16 data)
|
|
{
|
|
return phy_setup_op(dev, phy_addr, regnum,
|
|
ZYNQ_GEM_PHYMNTNC_OP_W_MASK, &data);
|
|
}
|
|
|
|
static void phy_detection(struct eth_device *dev)
|
|
{
|
|
int i;
|
|
u16 phyreg;
|
|
struct zynq_gem_priv *priv = dev->priv;
|
|
|
|
if (priv->phyaddr != -1) {
|
|
phyread(dev, priv->phyaddr, PHY_DETECT_REG, &phyreg);
|
|
if ((phyreg != 0xFFFF) &&
|
|
((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
|
|
/* Found a valid PHY address */
|
|
debug("Default phy address %d is valid\n",
|
|
priv->phyaddr);
|
|
return;
|
|
} else {
|
|
debug("PHY address is not setup correctly %d\n",
|
|
priv->phyaddr);
|
|
priv->phyaddr = -1;
|
|
}
|
|
}
|
|
|
|
debug("detecting phy address\n");
|
|
if (priv->phyaddr == -1) {
|
|
/* detect the PHY address */
|
|
for (i = 31; i >= 0; i--) {
|
|
phyread(dev, i, PHY_DETECT_REG, &phyreg);
|
|
if ((phyreg != 0xFFFF) &&
|
|
((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
|
|
/* Found a valid PHY address */
|
|
priv->phyaddr = i;
|
|
debug("Found valid phy address, %d\n", i);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
printf("PHY is not detected\n");
|
|
}
|
|
|
|
static int zynq_gem_setup_mac(struct eth_device *dev)
|
|
{
|
|
u32 i, macaddrlow, macaddrhigh;
|
|
struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
|
|
|
|
/* Set the MAC bits [31:0] in BOT */
|
|
macaddrlow = dev->enetaddr[0];
|
|
macaddrlow |= dev->enetaddr[1] << 8;
|
|
macaddrlow |= dev->enetaddr[2] << 16;
|
|
macaddrlow |= dev->enetaddr[3] << 24;
|
|
|
|
/* Set MAC bits [47:32] in TOP */
|
|
macaddrhigh = dev->enetaddr[4];
|
|
macaddrhigh |= dev->enetaddr[5] << 8;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
writel(0, ®s->laddr[i][LADDR_LOW]);
|
|
writel(0, ®s->laddr[i][LADDR_HIGH]);
|
|
/* Do not use MATCHx register */
|
|
writel(0, ®s->match[i]);
|
|
}
|
|
|
|
writel(macaddrlow, ®s->laddr[0][LADDR_LOW]);
|
|
writel(macaddrhigh, ®s->laddr[0][LADDR_HIGH]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
|
|
{
|
|
u32 i;
|
|
unsigned long clk_rate = 0;
|
|
struct phy_device *phydev;
|
|
const u32 stat_size = (sizeof(struct zynq_gem_regs) -
|
|
offsetof(struct zynq_gem_regs, stat)) / 4;
|
|
struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
|
|
struct zynq_gem_priv *priv = dev->priv;
|
|
const u32 supported = SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_1000baseT_Half |
|
|
SUPPORTED_1000baseT_Full;
|
|
|
|
if (!priv->init) {
|
|
/* Disable all interrupts */
|
|
writel(0xFFFFFFFF, ®s->idr);
|
|
|
|
/* Disable the receiver & transmitter */
|
|
writel(0, ®s->nwctrl);
|
|
writel(0, ®s->txsr);
|
|
writel(0, ®s->rxsr);
|
|
writel(0, ®s->phymntnc);
|
|
|
|
/* Clear the Hash registers for the mac address
|
|
* pointed by AddressPtr
|
|
*/
|
|
writel(0x0, ®s->hashl);
|
|
/* Write bits [63:32] in TOP */
|
|
writel(0x0, ®s->hashh);
|
|
|
|
/* Clear all counters */
|
|
for (i = 0; i <= stat_size; i++)
|
|
readl(®s->stat[i]);
|
|
|
|
/* Setup RxBD space */
|
|
memset(priv->rx_bd, 0, RX_BUF * sizeof(struct emac_bd));
|
|
|
|
for (i = 0; i < RX_BUF; i++) {
|
|
priv->rx_bd[i].status = 0xF0000000;
|
|
priv->rx_bd[i].addr =
|
|
((u32)(priv->rxbuffers) +
|
|
(i * PKTSIZE_ALIGN));
|
|
}
|
|
/* WRAP bit to last BD */
|
|
priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK;
|
|
/* Write RxBDs to IP */
|
|
writel((u32)priv->rx_bd, ®s->rxqbase);
|
|
|
|
/* Setup for DMA Configuration register */
|
|
writel(ZYNQ_GEM_DMACR_INIT, ®s->dmacr);
|
|
|
|
/* Setup for Network Control register, MDIO, Rx and Tx enable */
|
|
setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK);
|
|
|
|
priv->init++;
|
|
}
|
|
|
|
phy_detection(dev);
|
|
|
|
/* interface - look at tsec */
|
|
phydev = phy_connect(priv->bus, priv->phyaddr, dev,
|
|
PHY_INTERFACE_MODE_MII);
|
|
|
|
phydev->supported = supported | ADVERTISED_Pause |
|
|
ADVERTISED_Asym_Pause;
|
|
phydev->advertising = phydev->supported;
|
|
priv->phydev = phydev;
|
|
phy_config(phydev);
|
|
phy_startup(phydev);
|
|
|
|
if (!phydev->link) {
|
|
printf("%s: No link.\n", phydev->dev->name);
|
|
return -1;
|
|
}
|
|
|
|
switch (phydev->speed) {
|
|
case SPEED_1000:
|
|
writel(ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED1000,
|
|
®s->nwcfg);
|
|
clk_rate = ZYNQ_GEM_FREQUENCY_1000;
|
|
break;
|
|
case SPEED_100:
|
|
clrsetbits_le32(®s->nwcfg, ZYNQ_GEM_NWCFG_SPEED1000,
|
|
ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED100);
|
|
clk_rate = ZYNQ_GEM_FREQUENCY_100;
|
|
break;
|
|
case SPEED_10:
|
|
clk_rate = ZYNQ_GEM_FREQUENCY_10;
|
|
break;
|
|
}
|
|
|
|
/* Change the rclk and clk only not using EMIO interface */
|
|
if (!priv->emio)
|
|
zynq_slcr_gem_clk_setup(dev->iobase !=
|
|
ZYNQ_GEM_BASEADDR0, clk_rate);
|
|
|
|
setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
|
|
ZYNQ_GEM_NWCTRL_TXEN_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynq_gem_send(struct eth_device *dev, void *ptr, int len)
|
|
{
|
|
u32 addr, size;
|
|
struct zynq_gem_priv *priv = dev->priv;
|
|
struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
|
|
|
|
/* setup BD */
|
|
writel((u32)priv->tx_bd, ®s->txqbase);
|
|
|
|
/* Setup Tx BD */
|
|
memset(priv->tx_bd, 0, sizeof(struct emac_bd));
|
|
|
|
priv->tx_bd->addr = (u32)ptr;
|
|
priv->tx_bd->status = (len & ZYNQ_GEM_TXBUF_FRMLEN_MASK) |
|
|
ZYNQ_GEM_TXBUF_LAST_MASK;
|
|
|
|
addr = (u32) ptr;
|
|
addr &= ~(ARCH_DMA_MINALIGN - 1);
|
|
size = roundup(len, ARCH_DMA_MINALIGN);
|
|
flush_dcache_range(addr, addr + size);
|
|
barrier();
|
|
|
|
/* Start transmit */
|
|
setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_STARTTX_MASK);
|
|
|
|
/* Read TX BD status */
|
|
if (priv->tx_bd->status & ZYNQ_GEM_TXBUF_UNDERRUN)
|
|
printf("TX underrun\n");
|
|
if (priv->tx_bd->status & ZYNQ_GEM_TXBUF_EXHAUSTED)
|
|
printf("TX buffers exhausted in mid frame\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Do not check frame_recd flag in rx_status register 0x20 - just poll BD */
|
|
static int zynq_gem_recv(struct eth_device *dev)
|
|
{
|
|
int frame_len;
|
|
struct zynq_gem_priv *priv = dev->priv;
|
|
struct emac_bd *current_bd = &priv->rx_bd[priv->rxbd_current];
|
|
struct emac_bd *first_bd;
|
|
|
|
if (!(current_bd->addr & ZYNQ_GEM_RXBUF_NEW_MASK))
|
|
return 0;
|
|
|
|
if (!(current_bd->status &
|
|
(ZYNQ_GEM_RXBUF_SOF_MASK | ZYNQ_GEM_RXBUF_EOF_MASK))) {
|
|
printf("GEM: SOF or EOF not set for last buffer received!\n");
|
|
return 0;
|
|
}
|
|
|
|
frame_len = current_bd->status & ZYNQ_GEM_RXBUF_LEN_MASK;
|
|
if (frame_len) {
|
|
u32 addr = current_bd->addr & ZYNQ_GEM_RXBUF_ADD_MASK;
|
|
addr &= ~(ARCH_DMA_MINALIGN - 1);
|
|
u32 size = roundup(frame_len, ARCH_DMA_MINALIGN);
|
|
invalidate_dcache_range(addr, addr + size);
|
|
|
|
NetReceive((u8 *)addr, frame_len);
|
|
|
|
if (current_bd->status & ZYNQ_GEM_RXBUF_SOF_MASK)
|
|
priv->rx_first_buf = priv->rxbd_current;
|
|
else {
|
|
current_bd->addr &= ~ZYNQ_GEM_RXBUF_NEW_MASK;
|
|
current_bd->status = 0xF0000000; /* FIXME */
|
|
}
|
|
|
|
if (current_bd->status & ZYNQ_GEM_RXBUF_EOF_MASK) {
|
|
first_bd = &priv->rx_bd[priv->rx_first_buf];
|
|
first_bd->addr &= ~ZYNQ_GEM_RXBUF_NEW_MASK;
|
|
first_bd->status = 0xF0000000;
|
|
}
|
|
|
|
if ((++priv->rxbd_current) >= RX_BUF)
|
|
priv->rxbd_current = 0;
|
|
}
|
|
|
|
return frame_len;
|
|
}
|
|
|
|
static void zynq_gem_halt(struct eth_device *dev)
|
|
{
|
|
struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
|
|
|
|
clrsetbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
|
|
ZYNQ_GEM_NWCTRL_TXEN_MASK, 0);
|
|
}
|
|
|
|
static int zynq_gem_miiphyread(const char *devname, uchar addr,
|
|
uchar reg, ushort *val)
|
|
{
|
|
struct eth_device *dev = eth_get_dev();
|
|
int ret;
|
|
|
|
ret = phyread(dev, addr, reg, val);
|
|
debug("%s 0x%x, 0x%x, 0x%x\n", __func__, addr, reg, *val);
|
|
return ret;
|
|
}
|
|
|
|
static int zynq_gem_miiphy_write(const char *devname, uchar addr,
|
|
uchar reg, ushort val)
|
|
{
|
|
struct eth_device *dev = eth_get_dev();
|
|
|
|
debug("%s 0x%x, 0x%x, 0x%x\n", __func__, addr, reg, val);
|
|
return phywrite(dev, addr, reg, val);
|
|
}
|
|
|
|
int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio)
|
|
{
|
|
struct eth_device *dev;
|
|
struct zynq_gem_priv *priv;
|
|
void *bd_space;
|
|
|
|
dev = calloc(1, sizeof(*dev));
|
|
if (dev == NULL)
|
|
return -1;
|
|
|
|
dev->priv = calloc(1, sizeof(struct zynq_gem_priv));
|
|
if (dev->priv == NULL) {
|
|
free(dev);
|
|
return -1;
|
|
}
|
|
priv = dev->priv;
|
|
|
|
/* Align rxbuffers to ARCH_DMA_MINALIGN */
|
|
priv->rxbuffers = memalign(ARCH_DMA_MINALIGN, RX_BUF * PKTSIZE_ALIGN);
|
|
memset(priv->rxbuffers, 0, RX_BUF * PKTSIZE_ALIGN);
|
|
|
|
/* Align bd_space to 1MB */
|
|
bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
|
|
mmu_set_region_dcache_behaviour((u32)bd_space, BD_SPACE, DCACHE_OFF);
|
|
|
|
/* Initialize the bd spaces for tx and rx bd's */
|
|
priv->tx_bd = (struct emac_bd *)bd_space;
|
|
priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE);
|
|
|
|
priv->phyaddr = phy_addr;
|
|
priv->emio = emio;
|
|
|
|
sprintf(dev->name, "Gem.%x", base_addr);
|
|
|
|
dev->iobase = base_addr;
|
|
|
|
dev->init = zynq_gem_init;
|
|
dev->halt = zynq_gem_halt;
|
|
dev->send = zynq_gem_send;
|
|
dev->recv = zynq_gem_recv;
|
|
dev->write_hwaddr = zynq_gem_setup_mac;
|
|
|
|
eth_register(dev);
|
|
|
|
miiphy_register(dev->name, zynq_gem_miiphyread, zynq_gem_miiphy_write);
|
|
priv->bus = miiphy_get_dev_by_name(dev->name);
|
|
|
|
return 1;
|
|
}
|
|
|
|
#ifdef CONFIG_OF_CONTROL
|
|
int zynq_gem_of_init(const void *blob)
|
|
{
|
|
int offset = 0;
|
|
u32 ret = 0;
|
|
u32 reg, phy_reg;
|
|
|
|
debug("ZYNQ GEM: Initialization\n");
|
|
|
|
do {
|
|
offset = fdt_node_offset_by_compatible(blob, offset,
|
|
"xlnx,ps7-ethernet-1.00.a");
|
|
if (offset != -1) {
|
|
reg = fdtdec_get_addr(blob, offset, "reg");
|
|
if (reg != FDT_ADDR_T_NONE) {
|
|
offset = fdtdec_lookup_phandle(blob, offset,
|
|
"phy-handle");
|
|
if (offset != -1)
|
|
phy_reg = fdtdec_get_addr(blob, offset,
|
|
"reg");
|
|
else
|
|
phy_reg = 0;
|
|
|
|
debug("ZYNQ GEM: addr %x, phyaddr %x\n",
|
|
reg, phy_reg);
|
|
|
|
ret |= zynq_gem_initialize(NULL, reg,
|
|
phy_reg, 0);
|
|
|
|
} else {
|
|
debug("ZYNQ GEM: Can't get base address\n");
|
|
return -1;
|
|
}
|
|
}
|
|
} while (offset != -1);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|