mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
b60eff31f3
Remove the last uses of symbol offsets in ARM U-Boot. Remove some needless uses of _TEXT_BASE. Remove all _TEXT_BASE definitions. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
197 lines
4.8 KiB
ArmAsm
197 lines
4.8 KiB
ArmAsm
/*
|
|
* Board specific setup info
|
|
*
|
|
* (C) Copyright 2004, ARM Ltd.
|
|
* Philippe Robin, <philippe.robin@arm.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
|
|
/* Reset using CM control register */
|
|
.global reset_cpu
|
|
reset_cpu:
|
|
mov r0, #CM_BASE
|
|
ldr r1,[r0,#OS_CTRL]
|
|
orr r1,r1,#CMMASK_RESET
|
|
str r1,[r0,#OS_CTRL]
|
|
|
|
reset_failed:
|
|
b reset_failed
|
|
|
|
/* Set up the platform, once the cpu has been initialized */
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
/* If U-Boot has been run after the ARM boot monitor
|
|
* then all the necessary actions have been done
|
|
* otherwise we are running from user flash mapped to 0x00000000
|
|
* --- DO NOT REMAP BEFORE THE CODE HAS BEEN RELOCATED --
|
|
* Changes to the (possibly soft) reset defaults of the processor
|
|
* itself should be performed in cpu/arm<>/start.S
|
|
* This function affects only the core module or board settings
|
|
*/
|
|
|
|
#ifdef CONFIG_CM_INIT
|
|
/* CM has an initialization register
|
|
* - bits in it are wired into test-chip pins to force
|
|
* reset defaults
|
|
* - may need to change its contents for U-Boot
|
|
*/
|
|
|
|
/* set the desired CM specific value */
|
|
mov r2,#CMMASK_LOWVEC /* Vectors at 0x00000000 for all */
|
|
|
|
#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
|
|
orr r2,r2,#CMMASK_INIT_102
|
|
#else
|
|
|
|
#if !defined (CONFIG_CM920T) && !defined (CONFIG_CM920T_ETM) && \
|
|
!defined (CONFIG_CM940T)
|
|
|
|
#ifdef CONFIG_CM_MULTIPLE_SSRAM
|
|
/* set simple mapping */
|
|
and r2,r2,#CMMASK_MAP_SIMPLE
|
|
#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM */
|
|
|
|
#ifdef CONFIG_CM_TCRAM
|
|
/* disable TCRAM */
|
|
and r2,r2,#CMMASK_TCRAM_DISABLE
|
|
#endif /* #ifdef CONFIG_CM_TCRAM */
|
|
|
|
#if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \
|
|
defined (CONFIG_CM1136JF_S)
|
|
|
|
and r2,r2,#CMMASK_LE
|
|
|
|
#endif /* cpu with little endian initialization */
|
|
|
|
orr r2,r2,#CMMASK_CMxx6_COMMON
|
|
|
|
#endif /* CMxx6 code */
|
|
|
|
#endif /* ARM102xxE value */
|
|
|
|
/* read CM_INIT */
|
|
mov r0, #CM_BASE
|
|
ldr r1, [r0, #OS_INIT]
|
|
/* check against desired bit setting */
|
|
and r3,r1,r2
|
|
cmp r3,r2
|
|
beq init_reg_OK
|
|
|
|
/* lock for change */
|
|
mov r3, #CMVAL_LOCK1
|
|
add r3,r3,#CMVAL_LOCK2
|
|
str r3, [r0, #OS_LOCK]
|
|
/* set desired value */
|
|
orr r1,r1,r2
|
|
/* write & relock CM_INIT */
|
|
str r1, [r0, #OS_INIT]
|
|
mov r1, #CMVAL_UNLOCK
|
|
str r1, [r0, #OS_LOCK]
|
|
|
|
/* soft reset so new values used */
|
|
b reset_cpu
|
|
|
|
init_reg_OK:
|
|
|
|
#endif /* CONFIG_CM_INIT */
|
|
|
|
mov pc, lr
|
|
|
|
#ifdef CONFIG_CM_SPD_DETECT
|
|
/* Fast memory is available for the DRAM data
|
|
* - ensure it has been transferred, then summarize the data
|
|
* into a CM register
|
|
*/
|
|
.globl dram_query
|
|
dram_query:
|
|
stmfd r13!,{r4-r6,lr}
|
|
/* set up SDRAM info */
|
|
/* - based on example code from the CM User Guide */
|
|
mov r0, #CM_BASE
|
|
|
|
readspdbit:
|
|
ldr r1, [r0, #OS_SDRAM] /* read the SDRAM register */
|
|
and r1, r1, #0x20 /* mask SPD bit (5) */
|
|
cmp r1, #0x20 /* test if set */
|
|
bne readspdbit
|
|
|
|
setupsdram:
|
|
add r0, r0, #OS_SPD /* address the copy of the SDP data */
|
|
ldrb r1, [r0, #3] /* number of row address lines */
|
|
ldrb r2, [r0, #4] /* number of column address lines */
|
|
ldrb r3, [r0, #5] /* number of banks */
|
|
ldrb r4, [r0, #31] /* module bank density */
|
|
mul r5, r4, r3 /* size of SDRAM (MB divided by 4) */
|
|
mov r5, r5, ASL#2 /* size in MB */
|
|
mov r0, #CM_BASE /* reload for later code */
|
|
cmp r5, #0x10 /* is it 16MB? */
|
|
bne not16
|
|
mov r6, #0x2 /* store size and CAS latency of 2 */
|
|
b writesize
|
|
|
|
not16:
|
|
cmp r5, #0x20 /* is it 32MB? */
|
|
bne not32
|
|
mov r6, #0x6
|
|
b writesize
|
|
|
|
not32:
|
|
cmp r5, #0x40 /* is it 64MB? */
|
|
bne not64
|
|
mov r6, #0xa
|
|
b writesize
|
|
|
|
not64:
|
|
cmp r5, #0x80 /* is it 128MB? */
|
|
bne not128
|
|
mov r6, #0xe
|
|
b writesize
|
|
|
|
not128:
|
|
/* if it is none of these sizes then it is either 256MB, or
|
|
* there is no SDRAM fitted so default to 256MB
|
|
*/
|
|
mov r6, #0x12
|
|
|
|
writesize:
|
|
mov r1, r1, ASL#8 /* row addr lines from SDRAM reg */
|
|
orr r2, r1, r2, ASL#12 /* OR in column address lines */
|
|
orr r3, r2, r3, ASL#16 /* OR in number of banks */
|
|
orr r6, r6, r3 /* OR in size and CAS latency */
|
|
str r6, [r0, #OS_SDRAM] /* store SDRAM parameters */
|
|
|
|
#endif /* #ifdef CONFIG_CM_SPD_DETECT */
|
|
|
|
ldmfd r13!,{r4-r6,pc} /* back to caller */
|
|
|
|
#ifdef CONFIG_CM_REMAP
|
|
/* CM remap bit is operational
|
|
* - use it to map writeable memory at 0x00000000, in place of flash
|
|
*/
|
|
.globl cm_remap
|
|
cm_remap:
|
|
stmfd r13!,{r4-r10,lr}
|
|
|
|
mov r0, #CM_BASE
|
|
ldr r1, [r0, #OS_CTRL]
|
|
orr r1, r1, #CMMASK_REMAP /* set remap and led bits */
|
|
str r1, [r0, #OS_CTRL]
|
|
|
|
/* Now 0x00000000 is writeable, replace the vectors */
|
|
ldr r0, =_start /* r0 <- start of vectors */
|
|
add r2, r0, #64 /* r2 <- past vectors */
|
|
sub r1,r1,r1 /* destination 0x00000000 */
|
|
|
|
copy_vec:
|
|
ldmia r0!, {r3-r10} /* copy from source address [r0] */
|
|
stmia r1!, {r3-r10} /* copy to target address [r1] */
|
|
cmp r0, r2 /* until source end address [r2] */
|
|
ble copy_vec
|
|
|
|
ldmfd r13!,{r4-r10,pc} /* back to caller */
|
|
|
|
#endif /* #ifdef CONFIG_CM_REMAP */
|