mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
8ddd9c485f
ti_qspi uses memory map mode for faster read. Enabling DMA will increase read speed by 3x @48MHz on DRA74 EVM. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
374 lines
9.3 KiB
C
374 lines
9.3 KiB
C
/*
|
|
* TI QSPI driver
|
|
*
|
|
* Copyright (C) 2013, Texas Instruments, Incorporated
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/omap_gpio.h>
|
|
#include <asm/omap_common.h>
|
|
#include <asm/ti-common/ti-edma3.h>
|
|
|
|
/* ti qpsi register bit masks */
|
|
#define QSPI_TIMEOUT 2000000
|
|
#define QSPI_FCLK 192000000
|
|
/* clock control */
|
|
#define QSPI_CLK_EN (1 << 31)
|
|
#define QSPI_CLK_DIV_MAX 0xffff
|
|
/* command */
|
|
#define QSPI_EN_CS(n) (n << 28)
|
|
#define QSPI_WLEN(n) ((n-1) << 19)
|
|
#define QSPI_3_PIN (1 << 18)
|
|
#define QSPI_RD_SNGL (1 << 16)
|
|
#define QSPI_WR_SNGL (2 << 16)
|
|
#define QSPI_INVAL (4 << 16)
|
|
#define QSPI_RD_QUAD (7 << 16)
|
|
/* device control */
|
|
#define QSPI_DD(m, n) (m << (3 + n*8))
|
|
#define QSPI_CKPHA(n) (1 << (2 + n*8))
|
|
#define QSPI_CSPOL(n) (1 << (1 + n*8))
|
|
#define QSPI_CKPOL(n) (1 << (n*8))
|
|
/* status */
|
|
#define QSPI_WC (1 << 1)
|
|
#define QSPI_BUSY (1 << 0)
|
|
#define QSPI_WC_BUSY (QSPI_WC | QSPI_BUSY)
|
|
#define QSPI_XFER_DONE QSPI_WC
|
|
#define MM_SWITCH 0x01
|
|
#define MEM_CS 0x100
|
|
#define MEM_CS_UNSELECT 0xfffff0ff
|
|
#define MMAP_START_ADDR_DRA 0x5c000000
|
|
#define MMAP_START_ADDR_AM43x 0x30000000
|
|
#define CORE_CTRL_IO 0x4a002558
|
|
|
|
#define QSPI_CMD_READ (0x3 << 0)
|
|
#define QSPI_CMD_READ_QUAD (0x6b << 0)
|
|
#define QSPI_CMD_READ_FAST (0x0b << 0)
|
|
#define QSPI_SETUP0_NUM_A_BYTES (0x2 << 8)
|
|
#define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10)
|
|
#define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10)
|
|
#define QSPI_SETUP0_READ_NORMAL (0x0 << 12)
|
|
#define QSPI_SETUP0_READ_QUAD (0x3 << 12)
|
|
#define QSPI_CMD_WRITE (0x2 << 16)
|
|
#define QSPI_NUM_DUMMY_BITS (0x0 << 24)
|
|
|
|
/* ti qspi register set */
|
|
struct ti_qspi_regs {
|
|
u32 pid;
|
|
u32 pad0[3];
|
|
u32 sysconfig;
|
|
u32 pad1[3];
|
|
u32 int_stat_raw;
|
|
u32 int_stat_en;
|
|
u32 int_en_set;
|
|
u32 int_en_ctlr;
|
|
u32 intc_eoi;
|
|
u32 pad2[3];
|
|
u32 clk_ctrl;
|
|
u32 dc;
|
|
u32 cmd;
|
|
u32 status;
|
|
u32 data;
|
|
u32 setup0;
|
|
u32 setup1;
|
|
u32 setup2;
|
|
u32 setup3;
|
|
u32 memswitch;
|
|
u32 data1;
|
|
u32 data2;
|
|
u32 data3;
|
|
};
|
|
|
|
/* ti qspi slave */
|
|
struct ti_qspi_slave {
|
|
struct spi_slave slave;
|
|
struct ti_qspi_regs *base;
|
|
unsigned int mode;
|
|
u32 cmd;
|
|
u32 dc;
|
|
};
|
|
|
|
static inline struct ti_qspi_slave *to_ti_qspi_slave(struct spi_slave *slave)
|
|
{
|
|
return container_of(slave, struct ti_qspi_slave, slave);
|
|
}
|
|
|
|
static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave)
|
|
{
|
|
struct spi_slave *slave = &qslave->slave;
|
|
u32 memval = 0;
|
|
|
|
#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
|
|
slave->memory_map = (void *)MMAP_START_ADDR_DRA;
|
|
#else
|
|
slave->memory_map = (void *)MMAP_START_ADDR_AM43x;
|
|
#endif
|
|
|
|
#ifdef CONFIG_QSPI_QUAD_SUPPORT
|
|
memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES |
|
|
QSPI_SETUP0_NUM_D_BYTES_8_BITS |
|
|
QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE |
|
|
QSPI_NUM_DUMMY_BITS);
|
|
slave->op_mode_rx = SPI_OPM_RX_QOF;
|
|
#else
|
|
memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
|
|
QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
|
|
QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE |
|
|
QSPI_NUM_DUMMY_BITS;
|
|
#endif
|
|
|
|
writel(memval, &qslave->base->setup0);
|
|
}
|
|
|
|
static void ti_spi_set_speed(struct spi_slave *slave, uint hz)
|
|
{
|
|
struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
|
|
uint clk_div;
|
|
|
|
debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div);
|
|
|
|
if (!hz)
|
|
clk_div = 0;
|
|
else
|
|
clk_div = (QSPI_FCLK / hz) - 1;
|
|
|
|
/* disable SCLK */
|
|
writel(readl(&qslave->base->clk_ctrl) & ~QSPI_CLK_EN,
|
|
&qslave->base->clk_ctrl);
|
|
|
|
/* assign clk_div values */
|
|
if (clk_div < 0)
|
|
clk_div = 0;
|
|
else if (clk_div > QSPI_CLK_DIV_MAX)
|
|
clk_div = QSPI_CLK_DIV_MAX;
|
|
|
|
/* enable SCLK */
|
|
writel(QSPI_CLK_EN | clk_div, &qslave->base->clk_ctrl);
|
|
}
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
/* CS handled in xfer */
|
|
return;
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
|
|
|
|
debug("spi_cs_deactivate: 0x%08x\n", (u32)slave);
|
|
|
|
writel(qslave->cmd | QSPI_INVAL, &qslave->base->cmd);
|
|
}
|
|
|
|
void spi_init(void)
|
|
{
|
|
/* nothing to do */
|
|
}
|
|
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct ti_qspi_slave *qslave;
|
|
|
|
#ifdef CONFIG_AM43XX
|
|
gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio");
|
|
gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1);
|
|
#endif
|
|
|
|
qslave = spi_alloc_slave(struct ti_qspi_slave, bus, cs);
|
|
if (!qslave) {
|
|
printf("SPI_error: Fail to allocate ti_qspi_slave\n");
|
|
return NULL;
|
|
}
|
|
|
|
qslave->base = (struct ti_qspi_regs *)QSPI_BASE;
|
|
qslave->mode = mode;
|
|
|
|
ti_spi_set_speed(&qslave->slave, max_hz);
|
|
|
|
#ifdef CONFIG_TI_SPI_MMAP
|
|
ti_spi_setup_spi_register(qslave);
|
|
#endif
|
|
|
|
return &qslave->slave;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
|
|
free(qslave);
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
|
|
|
|
debug("spi_claim_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
|
|
|
|
qslave->dc = 0;
|
|
if (qslave->mode & SPI_CPHA)
|
|
qslave->dc |= QSPI_CKPHA(slave->cs);
|
|
if (qslave->mode & SPI_CPOL)
|
|
qslave->dc |= QSPI_CKPOL(slave->cs);
|
|
if (qslave->mode & SPI_CS_HIGH)
|
|
qslave->dc |= QSPI_CSPOL(slave->cs);
|
|
|
|
writel(qslave->dc, &qslave->base->dc);
|
|
writel(0, &qslave->base->cmd);
|
|
writel(0, &qslave->base->data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
|
|
|
|
debug("spi_release_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
|
|
|
|
writel(0, &qslave->base->dc);
|
|
writel(0, &qslave->base->cmd);
|
|
writel(0, &qslave->base->data);
|
|
}
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
|
|
void *din, unsigned long flags)
|
|
{
|
|
struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
|
|
uint words = bitlen >> 3; /* fixed 8-bit word length */
|
|
const uchar *txp = dout;
|
|
uchar *rxp = din;
|
|
uint status;
|
|
int timeout;
|
|
|
|
#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
|
|
int val;
|
|
#endif
|
|
|
|
debug("spi_xfer: bus:%i cs:%i bitlen:%i words:%i flags:%lx\n",
|
|
slave->bus, slave->cs, bitlen, words, flags);
|
|
|
|
/* Setup mmap flags */
|
|
if (flags & SPI_XFER_MMAP) {
|
|
writel(MM_SWITCH, &qslave->base->memswitch);
|
|
#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
|
|
val = readl(CORE_CTRL_IO);
|
|
val |= MEM_CS;
|
|
writel(val, CORE_CTRL_IO);
|
|
#endif
|
|
return 0;
|
|
} else if (flags & SPI_XFER_MMAP_END) {
|
|
writel(~MM_SWITCH, &qslave->base->memswitch);
|
|
#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
|
|
val = readl(CORE_CTRL_IO);
|
|
val &= MEM_CS_UNSELECT;
|
|
writel(val, CORE_CTRL_IO);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
if (bitlen == 0)
|
|
return -1;
|
|
|
|
if (bitlen % 8) {
|
|
debug("spi_xfer: Non byte aligned SPI transfer\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Setup command reg */
|
|
qslave->cmd = 0;
|
|
qslave->cmd |= QSPI_WLEN(8);
|
|
qslave->cmd |= QSPI_EN_CS(slave->cs);
|
|
if (flags & SPI_3WIRE)
|
|
qslave->cmd |= QSPI_3_PIN;
|
|
qslave->cmd |= 0xfff;
|
|
|
|
/* FIXME: This delay is required for successfull
|
|
* completion of read/write/erase. Once its root
|
|
* caused, it will be remove from the driver.
|
|
*/
|
|
#ifdef CONFIG_AM43XX
|
|
udelay(100);
|
|
#endif
|
|
while (words--) {
|
|
if (txp) {
|
|
debug("tx cmd %08x dc %08x data %02x\n",
|
|
qslave->cmd | QSPI_WR_SNGL, qslave->dc, *txp);
|
|
writel(*txp++, &qslave->base->data);
|
|
writel(qslave->cmd | QSPI_WR_SNGL,
|
|
&qslave->base->cmd);
|
|
status = readl(&qslave->base->status);
|
|
timeout = QSPI_TIMEOUT;
|
|
while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
|
|
if (--timeout < 0) {
|
|
printf("spi_xfer: TX timeout!\n");
|
|
return -1;
|
|
}
|
|
status = readl(&qslave->base->status);
|
|
}
|
|
debug("tx done, status %08x\n", status);
|
|
}
|
|
if (rxp) {
|
|
qslave->cmd |= QSPI_RD_SNGL;
|
|
debug("rx cmd %08x dc %08x\n",
|
|
qslave->cmd, qslave->dc);
|
|
#ifdef CONFIG_DRA7XX
|
|
udelay(500);
|
|
#endif
|
|
writel(qslave->cmd, &qslave->base->cmd);
|
|
status = readl(&qslave->base->status);
|
|
timeout = QSPI_TIMEOUT;
|
|
while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
|
|
if (--timeout < 0) {
|
|
printf("spi_xfer: RX timeout!\n");
|
|
return -1;
|
|
}
|
|
status = readl(&qslave->base->status);
|
|
}
|
|
*rxp++ = readl(&qslave->base->data);
|
|
debug("rx done, status %08x, read %02x\n",
|
|
status, *(rxp-1));
|
|
}
|
|
}
|
|
|
|
/* Terminate frame */
|
|
if (flags & SPI_XFER_END)
|
|
spi_cs_deactivate(slave);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* TODO: control from sf layer to here through dm-spi */
|
|
#ifdef CONFIG_TI_EDMA3
|
|
void spi_flash_copy_mmap(void *data, void *offset, size_t len)
|
|
{
|
|
unsigned int addr = (unsigned int) (data);
|
|
unsigned int edma_slot_num = 1;
|
|
|
|
/* Invalidate the area, so no writeback into the RAM races with DMA */
|
|
invalidate_dcache_range(addr, addr + roundup(len, ARCH_DMA_MINALIGN));
|
|
|
|
/* enable edma3 clocks */
|
|
enable_edma3_clocks();
|
|
|
|
/* Call edma3 api to do actual DMA transfer */
|
|
edma3_transfer(EDMA3_BASE, edma_slot_num, data, offset, len);
|
|
|
|
/* disable edma3 clocks */
|
|
disable_edma3_clocks();
|
|
|
|
*((unsigned int *)offset) += len;
|
|
}
|
|
#endif
|