mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
93a98a6ff3
Update snow's device tree and config to use driver model for sound. Also update the others as best we can. Spring does not appear to have audio support in the kernel. The smdk5250 and smdk5420 boards use a wolfson codec which I cannot test with. So the only boards that is tested and known to work are snow, pit and pi. Signed-off-by: Simon Glass <sjg@chromium.org>
319 lines
6.8 KiB
Text
319 lines
6.8 KiB
Text
/*
|
|
* SAMSUNG SMDK5250 board device tree source
|
|
*
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos5250.dtsi"
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
|
|
compatible = "samsung,smdk5250", "samsung,exynos5250";
|
|
|
|
aliases {
|
|
i2c0 = "/i2c@12C60000";
|
|
i2c1 = "/i2c@12C70000";
|
|
i2c2 = "/i2c@12C80000";
|
|
i2c3 = "/i2c@12C90000";
|
|
i2c4 = "/i2c@12CA0000";
|
|
i2c5 = "/i2c@12CB0000";
|
|
i2c6 = "/i2c@12CC0000";
|
|
i2c7 = "/i2c@12CD0000";
|
|
spi0 = "/spi@12d20000";
|
|
spi1 = "/spi@12d30000";
|
|
spi2 = "/spi@12d40000";
|
|
spi3 = "/spi@131a0000";
|
|
spi4 = "/spi@131b0000";
|
|
mmc0 = "/mmc@12200000";
|
|
mmc1 = "/mmc@12210000";
|
|
mmc2 = "/mmc@12220000";
|
|
mmc3 = "/mmc@12230000";
|
|
serial0 = "/serial@12C30000";
|
|
console = "/serial@12C30000";
|
|
i2s = "/sound@3830000";
|
|
};
|
|
|
|
sromc@12250000 {
|
|
bank = <1>;
|
|
srom-timing = <1 9 12 1 6 1 1>;
|
|
width = <2>;
|
|
lan@5000000 {
|
|
compatible = "smsc,lan9215", "smsc,lan";
|
|
reg = <0x5000000 0x100>;
|
|
phy-mode = "mii";
|
|
};
|
|
};
|
|
|
|
sound@3830000 {
|
|
samsung,codec-type = "wm8994";
|
|
};
|
|
|
|
sound@12d60000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@12C70000 {
|
|
wm8994: soundcodec@1a {
|
|
reg = <0x1a>;
|
|
u-boot,i2c-offset-len = <2>;
|
|
compatible = "wolfson,wm8994";
|
|
#sound-dai-cells = <1>;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "google,smdk5250-audio-wm8994";
|
|
|
|
samsung,model = "SMDK5250-I2S-WM8994";
|
|
samsung,audio-codec = <&wm8994>;
|
|
|
|
cpu {
|
|
sound-dai = <&i2s0 0>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&wm8994 0>;
|
|
};
|
|
};
|
|
|
|
i2c@12C60000 {
|
|
pmic@9 {
|
|
reg = <0x9>;
|
|
compatible = "maxim,max77686";
|
|
};
|
|
};
|
|
|
|
tmu@10060000 {
|
|
samsung,min-temp = <25>;
|
|
samsung,max-temp = <125>;
|
|
samsung,start-warning = <95>;
|
|
samsung,start-tripping = <105>;
|
|
samsung,hw-tripping = <110>;
|
|
samsung,efuse-min-value = <40>;
|
|
samsung,efuse-value = <55>;
|
|
samsung,efuse-max-value = <100>;
|
|
samsung,slope = <274761730>;
|
|
samsung,dc-value = <25>;
|
|
};
|
|
|
|
fimd@14400000 {
|
|
samsung,vl-freq = <60>;
|
|
samsung,vl-col = <2560>;
|
|
samsung,vl-row = <1600>;
|
|
samsung,vl-width = <2560>;
|
|
samsung,vl-height = <1600>;
|
|
|
|
samsung,vl-clkp;
|
|
samsung,vl-dp;
|
|
samsung,vl-bpix = <4>;
|
|
|
|
samsung,vl-hspw = <32>;
|
|
samsung,vl-hbpd = <80>;
|
|
samsung,vl-hfpd = <48>;
|
|
samsung,vl-vspw = <6>;
|
|
samsung,vl-vbpd = <37>;
|
|
samsung,vl-vfpd = <3>;
|
|
samsung,vl-cmd-allow-len = <0xf>;
|
|
|
|
samsung,winid = <3>;
|
|
samsung,interface-mode = <1>;
|
|
samsung,dp-enabled = <1>;
|
|
samsung,dual-lcd-enabled = <0>;
|
|
};
|
|
|
|
dp@145b0000 {
|
|
samsung,lt-status = <0>;
|
|
|
|
samsung,master-mode = <0>;
|
|
samsung,bist-mode = <0>;
|
|
samsung,bist-pattern = <0>;
|
|
samsung,h-sync-polarity = <0>;
|
|
samsung,v-sync-polarity = <0>;
|
|
samsung,interlaced = <0>;
|
|
samsung,color-space = <0>;
|
|
samsung,dynamic-range = <0>;
|
|
samsung,ycbcr-coeff = <0>;
|
|
samsung,color-depth = <1>;
|
|
};
|
|
|
|
mmc@12200000 {
|
|
samsung,bus-width = <8>;
|
|
samsung,timing = <1 3 3>;
|
|
samsung,removable = <0>;
|
|
};
|
|
|
|
mmc@12210000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc@12220000 {
|
|
samsung,bus-width = <4>;
|
|
samsung,timing = <1 2 3>;
|
|
samsung,removable = <1>;
|
|
};
|
|
|
|
mmc@12230000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci@12110000 {
|
|
samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&i2c_0 {
|
|
status = "okay";
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <20000>;
|
|
|
|
max77686@09 {
|
|
compatible = "maxim,max77686";
|
|
reg = <0x09>;
|
|
interrupt-parent = <&gpx3>;
|
|
interrupts = <2 IRQ_TYPE_NONE>;
|
|
|
|
voltage-regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "P1.0V_LDO_OUT1";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "P1.2V_LDO_OUT2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "P1.8V_LDO_OUT3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "P2.8V_LDO_OUT4";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "P1.8V_LDO_OUT5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "P1.1V_LDO_OUT6";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "P1.1V_LDO_OUT7";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "P1.0V_LDO_OUT8";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "P1.8V_LDO_OUT10";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "P1.8V_LDO_OUT11";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "P3.0V_LDO_OUT12";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "P1.8V_LDO_OUT13";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "P1.8V_LDO_OUT14";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "P1.0V_LDO_OUT15";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "P1.8V_LDO_OUT16";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "vdd_g3d";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "P1.8V_BUCK_OUT5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|