mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-29 08:01:08 +00:00
41575d8e4c
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
394 lines
8.4 KiB
C
394 lines
8.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Texas Instruments' K3 Clas 0 Adaptive Voltage Scaling driver
|
|
*
|
|
* Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Tero Kristo <t-kristo@ti.com>
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <asm/io.h>
|
|
#include <i2c.h>
|
|
#include <k3-avs.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/bitops.h>
|
|
#include <power/regulator.h>
|
|
|
|
#define AM6_VTM_DEVINFO(i) (priv->base + 0x100 + 0x20 * (i))
|
|
#define AM6_VTM_OPPVID_VD(i) (priv->base + 0x104 + 0x20 * (i))
|
|
|
|
#define AM6_VTM_AVS0_SUPPORTED BIT(12)
|
|
|
|
#define AM6_VTM_OPP_SHIFT(opp) (8 * (opp))
|
|
#define AM6_VTM_OPP_MASK 0xff
|
|
|
|
#define VD_FLAG_INIT_DONE BIT(0)
|
|
|
|
struct k3_avs_privdata {
|
|
void *base;
|
|
struct vd_config *vd_config;
|
|
};
|
|
|
|
struct opp {
|
|
u32 freq;
|
|
u32 volt;
|
|
};
|
|
|
|
struct vd_data {
|
|
int id;
|
|
u8 opp;
|
|
u8 flags;
|
|
int dev_id;
|
|
int clk_id;
|
|
struct opp opps[NUM_OPPS];
|
|
struct udevice *supply;
|
|
};
|
|
|
|
struct vd_config {
|
|
struct vd_data *vds;
|
|
u32 (*efuse_xlate)(struct k3_avs_privdata *priv, int idx, int opp);
|
|
};
|
|
|
|
static struct k3_avs_privdata *k3_avs_priv;
|
|
|
|
/**
|
|
* am6_efuse_voltage: read efuse voltage from VTM
|
|
* @priv: driver private data
|
|
* @idx: VD to read efuse for
|
|
* @opp: opp id to read
|
|
*
|
|
* Reads efuse value for the specified OPP, and converts the register
|
|
* value to a voltage. Returns the voltage in uV, or 0 if nominal voltage
|
|
* should be used.
|
|
*
|
|
* Efuse val to volt conversion logic:
|
|
*
|
|
* val > 171 volt increments in 20mV steps with base 171 => 1.66V
|
|
* val between 115 to 11 increments in 10mV steps with base 115 => 1.1V
|
|
* val between 15 to 115 increments in 5mV steps with base 15 => .6V
|
|
* val between 1 to 15 increments in 20mv steps with base 0 => .3V
|
|
* val 0 is invalid
|
|
*/
|
|
static u32 am6_efuse_xlate(struct k3_avs_privdata *priv, int idx, int opp)
|
|
{
|
|
u32 val = readl(AM6_VTM_OPPVID_VD(idx));
|
|
|
|
val >>= AM6_VTM_OPP_SHIFT(opp);
|
|
val &= AM6_VTM_OPP_MASK;
|
|
|
|
if (!val)
|
|
return 0;
|
|
|
|
if (val > 171)
|
|
return 1660000 + 20000 * (val - 171);
|
|
|
|
if (val > 115)
|
|
return 1100000 + 10000 * (val - 115);
|
|
|
|
if (val > 15)
|
|
return 600000 + 5000 * (val - 15);
|
|
|
|
return 300000 + 20000 * val;
|
|
}
|
|
|
|
static int k3_avs_program_voltage(struct k3_avs_privdata *priv,
|
|
struct vd_data *vd,
|
|
int opp_id)
|
|
{
|
|
u32 volt = vd->opps[opp_id].volt;
|
|
struct vd_data *vd2;
|
|
|
|
if (!vd->supply)
|
|
return -ENODEV;
|
|
|
|
vd->opp = opp_id;
|
|
vd->flags |= VD_FLAG_INIT_DONE;
|
|
|
|
/* Take care of ganged rails and pick the Max amongst them*/
|
|
for (vd2 = priv->vd_config->vds; vd2->id >= 0; vd2++) {
|
|
if (vd == vd2)
|
|
continue;
|
|
|
|
if (vd2->supply != vd->supply)
|
|
continue;
|
|
|
|
if (vd2->opps[vd2->opp].volt > volt)
|
|
volt = vd2->opps[vd2->opp].volt;
|
|
|
|
vd2->flags |= VD_FLAG_INIT_DONE;
|
|
}
|
|
|
|
return regulator_set_value(vd->supply, volt);
|
|
}
|
|
|
|
static struct vd_data *get_vd(struct k3_avs_privdata *priv, int idx)
|
|
{
|
|
struct vd_data *vd;
|
|
|
|
for (vd = priv->vd_config->vds; vd->id >= 0 && vd->id != idx; vd++)
|
|
;
|
|
|
|
if (vd->id < 0)
|
|
return NULL;
|
|
|
|
return vd;
|
|
}
|
|
|
|
/**
|
|
* k3_avs_set_opp: Sets the voltage for an arbitrary VD rail
|
|
* @dev: AVS device
|
|
* @vdd_id: voltage domain ID
|
|
* @opp_id: OPP ID
|
|
*
|
|
* Programs the desired OPP value for the defined voltage rail. This
|
|
* should be called from board files if reconfiguration is desired.
|
|
* Returns 0 on success, negative error value on failure.
|
|
*/
|
|
int k3_avs_set_opp(struct udevice *dev, int vdd_id, int opp_id)
|
|
{
|
|
struct k3_avs_privdata *priv = dev_get_priv(dev);
|
|
struct vd_data *vd;
|
|
|
|
vd = get_vd(priv, vdd_id);
|
|
if (!vd)
|
|
return -EINVAL;
|
|
|
|
return k3_avs_program_voltage(priv, vd, opp_id);
|
|
}
|
|
|
|
static int match_opp(struct vd_data *vd, u32 freq)
|
|
{
|
|
struct opp *opp;
|
|
int opp_id;
|
|
|
|
for (opp_id = 0; opp_id < NUM_OPPS; opp_id++) {
|
|
opp = &vd->opps[opp_id];
|
|
if (opp->freq == freq)
|
|
return opp_id;
|
|
}
|
|
|
|
printf("No matching OPP found for freq %d.\n", freq);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* k3_avs_notify_freq: Notify clock rate change towards AVS subsystem
|
|
* @dev_id: Device ID for the clock to be changed
|
|
* @clk_id: Clock ID for the clock to be changed
|
|
* @freq: New frequency for clock
|
|
*
|
|
* Checks if the provided clock is the MPU clock or not, if not, return
|
|
* immediately. If MPU clock is provided, maps the provided MPU frequency
|
|
* towards an MPU OPP, and programs the voltage to the regulator. Return 0
|
|
* on success, negative error value on failure.
|
|
*/
|
|
int k3_avs_notify_freq(int dev_id, int clk_id, u32 freq)
|
|
{
|
|
int opp_id;
|
|
struct k3_avs_privdata *priv = k3_avs_priv;
|
|
struct vd_data *vd;
|
|
|
|
/* Driver may not be probed yet */
|
|
if (!priv)
|
|
return -EINVAL;
|
|
|
|
for (vd = priv->vd_config->vds; vd->id >= 0; vd++) {
|
|
if (vd->dev_id != dev_id || vd->clk_id != clk_id)
|
|
continue;
|
|
|
|
opp_id = match_opp(vd, freq);
|
|
if (opp_id < 0)
|
|
return opp_id;
|
|
|
|
vd->opp = opp_id;
|
|
return k3_avs_program_voltage(priv, vd, opp_id);
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int k3_avs_configure(struct udevice *dev, struct k3_avs_privdata *priv)
|
|
{
|
|
struct vd_config *conf;
|
|
int ret;
|
|
char pname[20];
|
|
struct vd_data *vd;
|
|
|
|
conf = (void *)dev_get_driver_data(dev);
|
|
|
|
priv->vd_config = conf;
|
|
|
|
for (vd = conf->vds; vd->id >= 0; vd++) {
|
|
sprintf(pname, "vdd-supply-%d", vd->id);
|
|
ret = device_get_supply_regulator(dev, pname, &vd->supply);
|
|
if (ret)
|
|
dev_warn(dev, "supply not found for VD%d.\n", vd->id);
|
|
|
|
sprintf(pname, "ti,default-opp-%d", vd->id);
|
|
ret = dev_read_u32_default(dev, pname, -1);
|
|
if (ret != -1)
|
|
vd->opp = ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* k3_avs_probe: parses VD info from VTM, and re-configures the OPP data
|
|
*
|
|
* Parses all VDs on a device calculating the AVS class-0 voltages for them,
|
|
* and updates the vd_data based on this. The vd_data itself shall be used
|
|
* to program the required OPPs later on. Returns 0 on success, negative
|
|
* error value on failure.
|
|
*/
|
|
static int k3_avs_probe(struct udevice *dev)
|
|
{
|
|
int opp_id;
|
|
u32 volt;
|
|
struct opp *opp;
|
|
struct k3_avs_privdata *priv;
|
|
struct vd_data *vd;
|
|
int ret;
|
|
|
|
priv = dev_get_priv(dev);
|
|
|
|
k3_avs_priv = priv;
|
|
|
|
ret = k3_avs_configure(dev, priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->base = dev_read_addr_ptr(dev);
|
|
if (!priv->base)
|
|
return -ENODEV;
|
|
|
|
for (vd = priv->vd_config->vds; vd->id >= 0; vd++) {
|
|
if (!(readl(AM6_VTM_DEVINFO(vd->id)) &
|
|
AM6_VTM_AVS0_SUPPORTED)) {
|
|
dev_warn(dev, "AVS-class 0 not supported for VD%d\n",
|
|
vd->id);
|
|
continue;
|
|
}
|
|
|
|
for (opp_id = 0; opp_id < NUM_OPPS; opp_id++) {
|
|
opp = &vd->opps[opp_id];
|
|
|
|
if (!opp->freq)
|
|
continue;
|
|
|
|
volt = priv->vd_config->efuse_xlate(priv, vd->id,
|
|
opp_id);
|
|
if (volt)
|
|
opp->volt = volt;
|
|
}
|
|
}
|
|
|
|
for (vd = priv->vd_config->vds; vd->id >= 0; vd++) {
|
|
if (vd->flags & VD_FLAG_INIT_DONE)
|
|
continue;
|
|
|
|
k3_avs_program_voltage(priv, vd, vd->opp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct vd_data am654_vd_data[] = {
|
|
{
|
|
.id = AM6_VDD_CORE,
|
|
.dev_id = 82, /* AM6_DEV_CBASS0 */
|
|
.clk_id = 0, /* main sysclk0 */
|
|
.opp = AM6_OPP_NOM,
|
|
.opps = {
|
|
[AM6_OPP_NOM] = {
|
|
.volt = 1000000,
|
|
.freq = 250000000, /* CBASS0 */
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.id = AM6_VDD_MPU0,
|
|
.dev_id = 202, /* AM6_DEV_COMPUTE_CLUSTER_A53_0 */
|
|
.clk_id = 0, /* ARM clock */
|
|
.opp = AM6_OPP_NOM,
|
|
.opps = {
|
|
[AM6_OPP_NOM] = {
|
|
.volt = 1100000,
|
|
.freq = 800000000,
|
|
},
|
|
[AM6_OPP_OD] = {
|
|
.volt = 1200000,
|
|
.freq = 1000000000,
|
|
},
|
|
[AM6_OPP_TURBO] = {
|
|
.volt = 1240000,
|
|
.freq = 1100000000,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.id = AM6_VDD_MPU1,
|
|
.opp = AM6_OPP_NOM,
|
|
.dev_id = 204, /* AM6_DEV_COMPUTE_CLUSTER_A53_2 */
|
|
.clk_id = 0, /* ARM clock */
|
|
.opps = {
|
|
[AM6_OPP_NOM] = {
|
|
.volt = 1100000,
|
|
.freq = 800000000,
|
|
},
|
|
[AM6_OPP_OD] = {
|
|
.volt = 1200000,
|
|
.freq = 1000000000,
|
|
},
|
|
[AM6_OPP_TURBO] = {
|
|
.volt = 1240000,
|
|
.freq = 1100000000,
|
|
},
|
|
},
|
|
},
|
|
{ .id = -1 },
|
|
};
|
|
|
|
static struct vd_data j721e_vd_data[] = {
|
|
{
|
|
.id = J721E_VDD_MPU,
|
|
.opp = AM6_OPP_NOM,
|
|
.dev_id = 202, /* J721E_DEV_A72SS0_CORE0 */
|
|
.clk_id = 2, /* ARM clock */
|
|
.opps = {
|
|
[AM6_OPP_NOM] = {
|
|
.volt = 880000, /* TBD in DM */
|
|
.freq = 2000000000,
|
|
},
|
|
},
|
|
},
|
|
{ .id = -1 },
|
|
};
|
|
|
|
static struct vd_config j721e_vd_config = {
|
|
.efuse_xlate = am6_efuse_xlate,
|
|
.vds = j721e_vd_data,
|
|
};
|
|
|
|
static struct vd_config am654_vd_config = {
|
|
.efuse_xlate = am6_efuse_xlate,
|
|
.vds = am654_vd_data,
|
|
};
|
|
|
|
static const struct udevice_id k3_avs_ids[] = {
|
|
{ .compatible = "ti,am654-avs", .data = (ulong)&am654_vd_config },
|
|
{ .compatible = "ti,j721e-avs", .data = (ulong)&j721e_vd_config },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(k3_avs) = {
|
|
.name = "k3_avs",
|
|
.of_match = k3_avs_ids,
|
|
.id = UCLASS_MISC,
|
|
.probe = k3_avs_probe,
|
|
.priv_auto = sizeof(struct k3_avs_privdata),
|
|
};
|