u-boot/arch/x86/include/asm/intel_pinctrl_defs.h
Simon Glass 2831405447 x86: Correct wording of coreboot source code
Some files are taken or modified from coreboot, but the files are
no-longer part of the coreboot project. Fix the wording in a few places.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-16 14:36:28 +08:00

371 lines
14 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2015-2016 Intel Corp.
* Copyright 2019 Google LLC
*
* Modified from coreboot gpio_defs.h
*/
#ifndef _ASM_INTEL_PINCTRL_DEFS_H_
#define _ASM_INTEL_PINCTRL_DEFS_H_
/* This file is included by device trees, so avoid BIT() macros */
#define PAD_CFG0_TX_STATE_BIT 0
#define PAD_CFG0_TX_STATE (1 << PAD_CFG0_TX_STATE_BIT)
#define PAD_CFG0_RX_STATE_BIT 1
#define PAD_CFG0_RX_STATE (1 << PAD_CFG0_RX_STATE_BIT)
#define PAD_CFG0_TX_DISABLE (1 << 8)
#define PAD_CFG0_RX_DISABLE (1 << 9)
#define PAD_CFG0_MODE_SHIFT 10
#define PAD_CFG0_MODE_MASK (7 << PAD_CFG0_MODE_SHIFT)
#define PAD_CFG0_MODE_GPIO (0 << PAD_CFG0_MODE_SHIFT)
#define PAD_CFG0_MODE_NF1 (1 << PAD_CFG0_MODE_SHIFT)
#define PAD_CFG0_MODE_NF2 (2 << PAD_CFG0_MODE_SHIFT)
#define PAD_CFG0_MODE_NF3 (3 << PAD_CFG0_MODE_SHIFT)
#define PAD_CFG0_MODE_NF4 (4 << PAD_CFG0_MODE_SHIFT)
#define PAD_CFG0_MODE_NF5 (5 << PAD_CFG0_MODE_SHIFT)
#define PAD_CFG0_MODE_NF6 (6 << PAD_CFG0_MODE_SHIFT)
#define PAD_CFG0_ROUTE_MASK (0xf << 17)
#define PAD_CFG0_ROUTE_NMI (1 << 17)
#define PAD_CFG0_ROUTE_SMI (1 << 18)
#define PAD_CFG0_ROUTE_SCI (1 << 19)
#define PAD_CFG0_ROUTE_IOAPIC (1 << 20)
#define PAD_CFG0_RXTENCFG_MASK (3 << 21)
#define PAD_CFG0_RXINV_MASK (1 << 23)
#define PAD_CFG0_RX_POL_INVERT (1 << 23)
#define PAD_CFG0_RX_POL_NONE (0 << 23)
#define PAD_CFG0_PREGFRXSEL (1 << 24)
#define PAD_CFG0_TRIG_MASK (3 << 25)
#define PAD_CFG0_TRIG_LEVEL (0 << 25)
#define PAD_CFG0_TRIG_EDGE_SINGLE (1 << 25) /* controlled by RX_INVERT*/
#define PAD_CFG0_TRIG_OFF (2 << 25)
#define PAD_CFG0_TRIG_EDGE_BOTH (3 << 25)
#define PAD_CFG0_RXRAW1_MASK (1 << 28)
#define PAD_CFG0_RXPADSTSEL_MASK (1 << 29)
#define PAD_CFG0_RESET_MASK (3 << 30)
#define PAD_CFG0_LOGICAL_RESET_PWROK (0U << 30)
#define PAD_CFG0_LOGICAL_RESET_DEEP (1U << 30)
#define PAD_CFG0_LOGICAL_RESET_PLTRST (2U << 30)
#define PAD_CFG0_LOGICAL_RESET_RSMRST (3U << 30)
/*
* Use the fourth bit in IntSel field to indicate gpio ownership. This field is
* RO and hence not used during gpio configuration.
*/
#define PAD_CFG1_GPIO_DRIVER (0x1 << 4)
#define PAD_CFG1_IRQ_MASK (0xff << 0)
#define PAD_CFG1_IOSTERM_MASK (0x3 << 8)
#define PAD_CFG1_IOSTERM_SAME (0x0 << 8)
#define PAD_CFG1_IOSTERM_DISPUPD (0x1 << 8)
#define PAD_CFG1_IOSTERM_ENPD (0x2 << 8)
#define PAD_CFG1_IOSTERM_ENPU (0x3 << 8)
#define PAD_CFG1_PULL_MASK (0xf << 10)
#define PAD_CFG1_PULL_NONE (0x0 << 10)
#define PAD_CFG1_PULL_DN_5K (0x2 << 10)
#define PAD_CFG1_PULL_DN_20K (0x4 << 10)
#define PAD_CFG1_PULL_UP_1K (0x9 << 10)
#define PAD_CFG1_PULL_UP_5K (0xa << 10)
#define PAD_CFG1_PULL_UP_2K (0xb << 10)
#define PAD_CFG1_PULL_UP_20K (0xc << 10)
#define PAD_CFG1_PULL_UP_667 (0xd << 10)
#define PAD_CFG1_PULL_NATIVE (0xf << 10)
/* Tx enabled driving last value driven, Rx enabled */
#define PAD_CFG1_IOSSTATE_TX_LAST_RXE (0x0 << 14)
/*
* Tx enabled driving 0, Rx disabled and Rx driving 0 back to its controller
* internally
*/
#define PAD_CFG1_IOSSTATE_TX0_RX_DCR_X0 (0x1 << 14)
/*
* Tx enabled driving 0, Rx disabled and Rx driving 1 back to its controller
* internally
*/
#define PAD_CFG1_IOSSTATE_TX0_RX_DCR_X1 (0x2 << 14)
/*
* Tx enabled driving 1, Rx disabled and Rx driving 0 back to its controller
* internally
*/
#define PAD_CFG1_IOSSTATE_TX1_RX_DCR_X0 (0x3 << 14)
/*
* Tx enabled driving 1, Rx disabled and Rx driving 1 back to its controller
* internally
*/
#define PAD_CFG1_IOSSTATE_TX1_RX_DCR_X1 (0x4 << 14)
/* Tx enabled driving 0, Rx enabled */
#define PAD_CFG1_IOSSTATE_TX0_RXE (0x5 << 14)
/* Tx enabled driving 1, Rx enabled */
#define PAD_CFG1_IOSSTATE_TX1_RXE (0x6 << 14)
/* Hi-Z, Rx driving 0 back to its controller internally */
#define PAD_CFG1_IOSSTATE_HIZCRX0 (0x7 << 14)
/* Hi-Z, Rx driving 1 back to its controller internally */
#define PAD_CFG1_IOSSTATE_HIZCRX1 (0x8 << 14)
/* Tx disabled, Rx enabled */
#define PAD_CFG1_IOSSTATE_TXD_RXE (0x9 << 14)
#define PAD_CFG1_IOSSTATE_IGNORE (0xf << 14) /* Ignore Iostandby */
/* mask to extract Iostandby bits */
#define PAD_CFG1_IOSSTATE_MASK (0xf << 14)
#define PAD_CFG1_IOSSTATE_SHIFT 14 /* set Iostandby bits [17:14] */
#define PAD_CFG2_DEBEN 1
/* Debounce Duration = (2 ^ PAD_CFG2_DEBOUNCE_x_RTC) * RTC clock duration */
#define PAD_CFG2_DEBOUNCE_8_RTC (0x3 << 1)
#define PAD_CFG2_DEBOUNCE_16_RTC (0x4 << 1)
#define PAD_CFG2_DEBOUNCE_32_RTC (0x5 << 1)
#define PAD_CFG2_DEBOUNCE_64_RTC (0x6 << 1)
#define PAD_CFG2_DEBOUNCE_128_RTC (0x7 << 1)
#define PAD_CFG2_DEBOUNCE_256_RTC (0x8 << 1)
#define PAD_CFG2_DEBOUNCE_512_RTC (0x9 << 1)
#define PAD_CFG2_DEBOUNCE_1K_RTC (0xa << 1)
#define PAD_CFG2_DEBOUNCE_2K_RTC (0xb << 1)
#define PAD_CFG2_DEBOUNCE_4K_RTC (0xc << 1)
#define PAD_CFG2_DEBOUNCE_8K_RTC (0xd << 1)
#define PAD_CFG2_DEBOUNCE_16K_RTC (0xe << 1)
#define PAD_CFG2_DEBOUNCE_32K_RTC (0xf << 1)
#define PAD_CFG2_DEBOUNCE_MASK 0x1f
/* voltage tolerance 0=3.3V default 1=1.8V tolerant */
#if IS_ENABLED(INTEL_PINCTRL_IOSTANDBY)
#define PAD_CFG1_TOL_MASK (0x1 << 25)
#define PAD_CFG1_TOL_1V8 (0x1 << 25)
#endif
#define PAD_FUNC(value) PAD_CFG0_MODE_##value
#define PAD_RESET(value) PAD_CFG0_LOGICAL_RESET_##value
#define PAD_PULL(value) PAD_CFG1_PULL_##value
#define PAD_IOSSTATE(value) PAD_CFG1_IOSSTATE_##value
#define PAD_IOSTERM(value) PAD_CFG1_IOSTERM_##value
#define PAD_IRQ_CFG(route, trig, inv) \
(PAD_CFG0_ROUTE_##route | \
PAD_CFG0_TRIG_##trig | \
PAD_CFG0_RX_POL_##inv)
#if IS_ENABLED(INTEL_PINCTRL_DUAL_ROUTE_SUPPORT)
#define PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv) \
(PAD_CFG0_ROUTE_##route1 | \
PAD_CFG0_ROUTE_##route2 | \
PAD_CFG0_TRIG_##trig | \
PAD_CFG0_RX_POL_##inv)
#endif /* CONFIG_INTEL_PINCTRL_DUAL_ROUTE_SUPPORT */
#define _PAD_CFG_STRUCT(__pad, __config0, __config1) \
__pad(__config0) (__config1)
/* Native function configuration */
#define PAD_CFG_NF(pad, pull, rst, func) \
_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
PAD_IOSSTATE(TX_LAST_RXE))
#if IS_ENABLED(CONFIG_INTEL_GPIO_PADCFG_PADTOL)
/*
* Native 1.8V tolerant pad, only applies to some pads like I2C/I2S. Not
* applicable to all SOCs. Refer EDS.
*/
#define PAD_CFG_NF_1V8(pad, pull, rst, func) \
_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) |\
PAD_IOSSTATE(TX_LAST_RXE) | PAD_CFG1_TOL_1V8)
#endif
/* Native function configuration for standby state */
#define PAD_CFG_NF_IOSSTATE(pad, pull, rst, func, iosstate) \
_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
PAD_IOSSTATE(iosstate))
/*
* Native function configuration for standby state, also configuring iostandby
* as masked
*/
#define PAD_CFG_NF_IOSTANDBY_IGNORE(pad, pull, rst, func) \
_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
PAD_IOSSTATE(IGNORE))
/*
* Native function configuration for standby state, also configuring iosstate
* and iosterm
*/
#define PAD_CFG_NF_IOSSTATE_IOSTERM(pad, pull, rst, func, iosstate, iosterm) \
_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
/* General purpose output, no pullup/down */
#define PAD_CFG_GPO(pad, val, rst) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
PAD_PULL(NONE) | PAD_IOSSTATE(TX_LAST_RXE))
/* General purpose output, with termination specified */
#define PAD_CFG_TERM_GPO(pad, val, pull, rst) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
PAD_PULL(pull) | PAD_IOSSTATE(TX_LAST_RXE))
/* General purpose output, no pullup/down */
#define PAD_CFG_GPO_GPIO_DRIVER(pad, val, rst, pull) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
PAD_PULL(pull) | PAD_IOSSTATE(TX_LAST_RXE) | \
PAD_CFG1_GPIO_DRIVER)
/* General purpose output */
#define PAD_CFG_GPO_IOSSTATE_IOSTERM(pad, val, rst, pull, iosstate, ioterm) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(ioterm))
/* General purpose input */
#define PAD_CFG_GPI(pad, pull, rst) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
PAD_PULL(pull) | PAD_IOSSTATE(TXD_RXE))
/* General purpose input. The following macro sets the
* Host Software Pad Ownership to GPIO Driver mode.
*/
#define PAD_CFG_GPI_GPIO_DRIVER(pad, pull, rst) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TXD_RXE))
#define PAD_CFG_GPIO_DRIVER_HI_Z(pad, pull, rst, iosstate, iosterm) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_CFG0_RX_DISABLE, \
PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | \
PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
#define PAD_CFG_GPIO_HI_Z(pad, pull, rst, iosstate, iosterm) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_CFG0_RX_DISABLE, PAD_PULL(pull) | \
PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
/* GPIO Interrupt */
#define PAD_CFG_GPI_INT(pad, pull, rst, trig) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_CFG0_TRIG_##trig | PAD_CFG0_RX_POL_NONE, \
PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TXD_RXE))
/*
* No Connect configuration for unused pad.
* Both TX and RX are disabled. RX disabling is done to avoid unnecessary
* setting of GPI_STS.
*/
#define PAD_NC(pad, pull) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(DEEP) | \
PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE, \
PAD_PULL(pull) | PAD_IOSSTATE(TXD_RXE))
/* General purpose input, routed to APIC */
#define PAD_CFG_GPI_APIC(pad, pull, rst, trig, inv) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(TXD_RXE))
/* General purpose input, routed to APIC - with IOStandby Config*/
#define PAD_CFG_GPI_APIC_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
/*
* The following APIC macros assume the APIC will handle the filtering
* on its own end. One just needs to pass an active high message into the
* ITSS.
*/
#define PAD_CFG_GPI_APIC_LOW(pad, pull, rst) \
PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, INVERT)
#define PAD_CFG_GPI_APIC_HIGH(pad, pull, rst) \
PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, NONE)
#define PAD_CFG_GPI_APIC_EDGE_LOW(pad, pull, rst) \
PAD_CFG_GPI_APIC(pad, pull, rst, EDGE_SINGLE, INVERT)
/* General purpose input, routed to SMI */
#define PAD_CFG_GPI_SMI(pad, pull, rst, trig, inv) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(TXD_RXE))
/* General purpose input, routed to SMI */
#define PAD_CFG_GPI_SMI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
#define PAD_CFG_GPI_SMI_LOW(pad, pull, rst, trig) \
PAD_CFG_GPI_SMI(pad, pull, rst, trig, INVERT)
#define PAD_CFG_GPI_SMI_HIGH(pad, pull, rst, trig) \
PAD_CFG_GPI_SMI(pad, pull, rst, trig, NONE)
/* General purpose input, routed to SCI */
#define PAD_CFG_GPI_SCI(pad, pull, rst, trig, inv) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(TXD_RXE))
/* General purpose input, routed to SCI */
#define PAD_CFG_GPI_SCI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
#define PAD_CFG_GPI_SCI_LOW(pad, pull, rst, trig) \
PAD_CFG_GPI_SCI(pad, pull, rst, trig, INVERT)
#define PAD_CFG_GPI_SCI_HIGH(pad, pull, rst, trig) \
PAD_CFG_GPI_SCI(pad, pull, rst, trig, NONE)
#define PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, inv, dur) \
_PAD_CFG_STRUCT_3(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(TXD_RXE), PAD_CFG2_DEBEN | PAD_CFG2_##dur)
#define PAD_CFG_GPI_SCI_LOW_DEBEN(pad, pull, rst, trig, dur) \
PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, INVERT, dur)
#define PAD_CFG_GPI_SCI_HIGH_DEBEN(pad, pull, rst, trig, dur) \
PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, NONE, dur)
/* General purpose input, routed to NMI */
#define PAD_CFG_GPI_NMI(pad, pull, rst, trig, inv) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(TXD_RXE))
#if IS_ENABLED(INTEL_PINCTRL_DUAL_ROUTE_SUPPORT)
/* GPI, GPIO Driver, SCI interrupt */
#define PAD_CFG_GPI_GPIO_DRIVER_SCI(pad, pull, rst, trig, inv) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_IRQ_CFG(SCI, trig, inv), \
PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TXD_RXE))
#define PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, route1, route2) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv), \
PAD_PULL(pull) | PAD_IOSSTATE(TXD_RXE))
#define PAD_CFG_GPI_IRQ_WAKE(pad, pull, rst, trig, inv) \
PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, IOAPIC, SCI)
#endif /* CONFIG_INTEL_PINCTRL_DUAL_ROUTE_SUPPORT */
#endif /* _ASM_INTEL_PINCTRL_DEFS_H_ */