mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 06:42:56 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
145 lines
3.9 KiB
C
145 lines
3.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2010-2017 CS Systemes d'Information
|
|
* Florent Trinh Thai <florent.trinh-thai@c-s.fr>
|
|
* Christophe Leroy <christophe.leroy@c-s.fr>
|
|
*
|
|
* Board specific routines for the MCR3000 board
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <hwconfig.h>
|
|
#include <mpc8xx.h>
|
|
#include <fdt_support.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define SDRAM_MAX_SIZE (32 * 1024 * 1024)
|
|
|
|
static const uint cs1_dram_table_66[] = {
|
|
/* DRAM - single read. (offset 0 in upm RAM) */
|
|
0x0F3DFC04, 0x0FEFBC04, 0x00BE7804, 0x0FFDF400,
|
|
0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
|
|
|
|
/* DRAM - burst read. (offset 8 in upm RAM) */
|
|
0x0F3DFC04, 0x0FEFBC04, 0x00BF7C04, 0x00FFFC00,
|
|
0x00FFFC00, 0x00FEF800, 0x0FFDF400, 0x1FFFFC05,
|
|
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
|
|
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
|
|
|
|
/* DRAM - single write. (offset 18 in upm RAM) */
|
|
0x0F3DFC04, 0x0FEFB800, 0x00BF7404, 0x0FFEF804,
|
|
0x0FFDF404, 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF,
|
|
|
|
/* DRAM - burst write. (offset 20 in upm RAM) */
|
|
0x0F3DFC04, 0x0FEFB800, 0x00BF7400, 0x00FFFC00,
|
|
0x00FFFC00, 0x00FFFC04, 0x0FFEF804, 0x0FFDF404,
|
|
0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
|
|
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
|
|
|
|
/* refresh (offset 30 in upm RAM) */
|
|
0x0FFDF404, 0x0FFEBC04, 0x0FFD7C84, 0x0FFFFC04,
|
|
0x0FFFFC04, 0x0FFFFC04, 0x1FFFFC85, 0xFFFFFFFF,
|
|
|
|
/* init */
|
|
0x0FEEB874, 0x0FBD7474, 0x1FFFFC45, 0xFFFFFFFF,
|
|
|
|
/* exception. (offset 3c in upm RAM) */
|
|
0xFFFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
|
|
};
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
const char *sync = "receive";
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
/* BRG */
|
|
do_fixup_by_path_u32(blob, "/soc/cpm", "brg-frequency",
|
|
bd->bi_busfreq, 1);
|
|
|
|
/* MAC addr */
|
|
fdt_fixup_ethernet(blob);
|
|
|
|
/* Bus Frequency for CPM */
|
|
do_fixup_by_path_u32(blob, "/soc", "bus-frequency", bd->bi_busfreq, 1);
|
|
|
|
/* E1 interface - Set data rate */
|
|
do_fixup_by_path_u32(blob, "/localbus/e1-wan", "data-rate", 2, 1);
|
|
|
|
/* E1 interface - Set channel phase to 0 */
|
|
do_fixup_by_path_u32(blob, "/localbus/e1-wan", "channel-phase", 0, 1);
|
|
|
|
/* E1 interface - rising edge sync pulse transmit */
|
|
do_fixup_by_path(blob, "/localbus/e1-wan", "rising-edge-sync-pulse",
|
|
sync, strlen(sync), 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
serial_puts("BOARD: MCR3000 CSSI\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
|
|
memctl8xx_t __iomem *memctl = &immap->im_memctl;
|
|
|
|
printf("UPMA init for SDRAM (CAS latency 2), ");
|
|
printf("init address 0x%08x, size ", (int)dram_init);
|
|
/* Configure UPMA for cs1 */
|
|
upmconfig(UPMA, (uint *)cs1_dram_table_66,
|
|
sizeof(cs1_dram_table_66) / sizeof(uint));
|
|
udelay(10);
|
|
out_be16(&memctl->memc_mptpr, 0x0200);
|
|
out_be32(&memctl->memc_mamr, 0x14904000);
|
|
udelay(10);
|
|
out_be32(&memctl->memc_or1, CONFIG_SYS_OR1_PRELIM);
|
|
out_be32(&memctl->memc_br1, CONFIG_SYS_BR1_PRELIM);
|
|
udelay(10);
|
|
out_be32(&memctl->memc_mcr, 0x80002830);
|
|
out_be32(&memctl->memc_mar, 0x00000088);
|
|
out_be32(&memctl->memc_mcr, 0x80002038);
|
|
udelay(200);
|
|
|
|
gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
|
|
SDRAM_MAX_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
|
|
iop8xx_t __iomem *iop = &immr->im_ioport;
|
|
|
|
/* Set port C13 as GPIO (BTN_ACQ_AL) */
|
|
clrbits_be16(&iop->iop_pcpar, 0x4);
|
|
clrbits_be16(&iop->iop_pcdir, 0x4);
|
|
|
|
/* if BTN_ACQ_AL is pressed then bootdelay is changed to 60 second */
|
|
if ((in_be16(&iop->iop_pcdat) & 0x0004) == 0)
|
|
env_set("bootdelay", "60");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
|
|
|
|
/*
|
|
* Erase FPGA(s) for reboot
|
|
*/
|
|
clrbits_be32(&immr->im_cpm.cp_pbdat, 0x00020000); /* PROGFPGA down */
|
|
setbits_be32(&immr->im_cpm.cp_pbdir, 0x00020000); /* PROGFPGA output */
|
|
udelay(1); /* Wait more than 300ns */
|
|
setbits_be32(&immr->im_cpm.cp_pbdat, 0x00020000); /* PROGFPGA up */
|
|
|
|
return 0;
|
|
}
|