mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
98 lines
2.3 KiB
C
98 lines
2.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*/
|
|
|
|
/*
|
|
* This file contains the configuration parameters for qemu-mips target.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_QEMU_MIPS
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"addmisc=setenv bootargs ${bootargs} " \
|
|
"console=ttyS0,${baudrate} " \
|
|
"panic=1\0" \
|
|
"bootfile=/tftpboot/vmlinux\0" \
|
|
"load=tftp 80500000 ${u-boot}\0" \
|
|
""
|
|
|
|
#define CONFIG_BOOTCOMMAND "bootp;bootelf"
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
|
|
#define CONFIG_DRIVER_NE2000
|
|
#define CONFIG_DRIVER_NE2000_BASE 0xb4000300
|
|
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
#define CONFIG_SYS_NS16550_CLK 115200
|
|
#define CONFIG_SYS_NS16550_COM1 0xb40003f8
|
|
|
|
#ifdef CONFIG_SYS_BIG_ENDIAN
|
|
#define CONFIG_IDE_SWAP_IO
|
|
#endif
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 2
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
|
|
#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000
|
|
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 4
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (256 << 10)
|
|
|
|
#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
|
|
|
|
#define CONFIG_SYS_MHZ 132
|
|
|
|
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
|
|
|
|
/* Cached addr */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x80000000
|
|
|
|
/* default load address */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x81000000
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x80100000
|
|
#define CONFIG_SYS_MEMTEST_END 0x80800000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
/* The following #defines are needed to get flash environment right */
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
|
|
|
|
/* We boot from this flash, selected with dip switch */
|
|
#define CONFIG_SYS_FLASH_BASE 0xbfc00000
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128
|
|
|
|
/* Address and size of Primary Environment Sector */
|
|
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
#define MEM_SIZE 128
|
|
|
|
#endif /* __CONFIG_H */
|