mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 07:01:24 +00:00
53677ef18e
This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
444 lines
11 KiB
C
444 lines
11 KiB
C
/*
|
|
* i2c.c - driver for Blackfin on-chip TWI/I2C
|
|
*
|
|
* Copyright (c) 2006-2008 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#ifdef CONFIG_HARD_I2C
|
|
|
|
#include <asm/blackfin.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mach-common/bits/twi.h>
|
|
|
|
/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
|
|
#ifdef TWI0_CLKDIV
|
|
#define bfin_read_TWI_CLKDIV() bfin_read_TWI0_CLKDIV()
|
|
#define bfin_write_TWI_CLKDIV(val) bfin_write_TWI0_CLKDIV(val)
|
|
#define bfin_read_TWI_CONTROL() bfin_read_TWI0_CONTROL()
|
|
#define bfin_write_TWI_CONTROL(val) bfin_write_TWI0_CONTROL(val)
|
|
#define bfin_read_TWI_SLAVE_CTL() bfin_read_TWI0_SLAVE_CTL()
|
|
#define bfin_write_TWI_SLAVE_CTL(val) bfin_write_TWI0_SLAVE_CTL(val)
|
|
#define bfin_read_TWI_SLAVE_STAT() bfin_read_TWI0_SLAVE_STAT()
|
|
#define bfin_write_TWI_SLAVE_STAT(val) bfin_write_TWI0_SLAVE_STAT(val)
|
|
#define bfin_read_TWI_SLAVE_ADDR() bfin_read_TWI0_SLAVE_ADDR()
|
|
#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write_TWI0_SLAVE_ADDR(val)
|
|
#define bfin_read_TWI_MASTER_CTL() bfin_read_TWI0_MASTER_CTL()
|
|
#define bfin_write_TWI_MASTER_CTL(val) bfin_write_TWI0_MASTER_CTL(val)
|
|
#define bfin_read_TWI_MASTER_STAT() bfin_read_TWI0_MASTER_STAT()
|
|
#define bfin_write_TWI_MASTER_STAT(val) bfin_write_TWI0_MASTER_STAT(val)
|
|
#define bfin_read_TWI_MASTER_ADDR() bfin_read_TWI0_MASTER_ADDR()
|
|
#define bfin_write_TWI_MASTER_ADDR(val) bfin_write_TWI0_MASTER_ADDR(val)
|
|
#define bfin_read_TWI_INT_STAT() bfin_read_TWI0_INT_STAT()
|
|
#define bfin_write_TWI_INT_STAT(val) bfin_write_TWI0_INT_STAT(val)
|
|
#define bfin_read_TWI_INT_MASK() bfin_read_TWI0_INT_MASK()
|
|
#define bfin_write_TWI_INT_MASK(val) bfin_write_TWI0_INT_MASK(val)
|
|
#define bfin_read_TWI_FIFO_CTL() bfin_read_TWI0_FIFO_CTL()
|
|
#define bfin_write_TWI_FIFO_CTL(val) bfin_write_TWI0_FIFO_CTL(val)
|
|
#define bfin_read_TWI_FIFO_STAT() bfin_read_TWI0_FIFO_STAT()
|
|
#define bfin_write_TWI_FIFO_STAT(val) bfin_write_TWI0_FIFO_STAT(val)
|
|
#define bfin_read_TWI_XMT_DATA8() bfin_read_TWI0_XMT_DATA8()
|
|
#define bfin_write_TWI_XMT_DATA8(val) bfin_write_TWI0_XMT_DATA8(val)
|
|
#define bfin_read_TWI_XMT_DATA_16() bfin_read_TWI0_XMT_DATA16()
|
|
#define bfin_write_TWI_XMT_DATA16(val) bfin_write_TWI0_XMT_DATA16(val)
|
|
#define bfin_read_TWI_RCV_DATA8() bfin_read_TWI0_RCV_DATA8()
|
|
#define bfin_write_TWI_RCV_DATA8(val) bfin_write_TWI0_RCV_DATA8(val)
|
|
#define bfin_read_TWI_RCV_DATA16() bfin_read_TWI0_RCV_DATA16()
|
|
#define bfin_write_TWI_RCV_DATA16(val) bfin_write_TWI0_RCV_DATA16(val)
|
|
#endif
|
|
|
|
#ifdef DEBUG_I2C
|
|
#define PRINTD(fmt,args...) do { \
|
|
DECLARE_GLOBAL_DATA_PTR; \
|
|
if (gd->have_console) \
|
|
printf(fmt ,##args); \
|
|
} while (0)
|
|
#else
|
|
#define PRINTD(fmt,args...)
|
|
#endif
|
|
|
|
#ifndef CONFIG_TWICLK_KHZ
|
|
#define CONFIG_TWICLK_KHZ 50
|
|
#endif
|
|
|
|
/* All transfers are described by this data structure */
|
|
struct i2c_msg {
|
|
u16 addr; /* slave address */
|
|
u16 flags;
|
|
#define I2C_M_STOP 0x2
|
|
#define I2C_M_RD 0x1
|
|
u16 len; /* msg length */
|
|
u8 *buf; /* pointer to msg data */
|
|
};
|
|
|
|
/**
|
|
* i2c_reset: - reset the host controller
|
|
*/
|
|
static void i2c_reset(void)
|
|
{
|
|
/* Disable TWI */
|
|
bfin_write_TWI_CONTROL(0);
|
|
SSYNC();
|
|
|
|
/* Set TWI internal clock as 10MHz */
|
|
bfin_write_TWI_CONTROL(((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F);
|
|
|
|
/* Set Twi interface clock as specified */
|
|
if (CONFIG_TWICLK_KHZ > 400)
|
|
bfin_write_TWI_CLKDIV(((5 * 1024 / 400) << 8) | ((5 * 1024 /
|
|
400) & 0xFF));
|
|
else
|
|
bfin_write_TWI_CLKDIV(((5 * 1024 /
|
|
CONFIG_TWICLK_KHZ) << 8) | ((5 * 1024 /
|
|
CONFIG_TWICLK_KHZ)
|
|
& 0xFF));
|
|
|
|
/* Enable TWI */
|
|
bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA);
|
|
SSYNC();
|
|
}
|
|
|
|
int wait_for_completion(struct i2c_msg *msg, int timeout_count)
|
|
{
|
|
unsigned short twi_int_stat;
|
|
unsigned short mast_stat;
|
|
int i;
|
|
|
|
for (i = 0; i < timeout_count; i++) {
|
|
twi_int_stat = bfin_read_TWI_INT_STAT();
|
|
mast_stat = bfin_read_TWI_MASTER_STAT();
|
|
|
|
if (XMTSERV & twi_int_stat) {
|
|
/* Transmit next data */
|
|
if (msg->len > 0) {
|
|
bfin_write_TWI_XMT_DATA8(*(msg->buf++));
|
|
msg->len--;
|
|
} else if (msg->flags & I2C_M_STOP)
|
|
bfin_write_TWI_MASTER_CTL
|
|
(bfin_read_TWI_MASTER_CTL() | STOP);
|
|
SSYNC();
|
|
/* Clear status */
|
|
bfin_write_TWI_INT_STAT(XMTSERV);
|
|
SSYNC();
|
|
i = 0;
|
|
}
|
|
if (RCVSERV & twi_int_stat) {
|
|
if (msg->len > 0) {
|
|
/* Receive next data */
|
|
*(msg->buf++) = bfin_read_TWI_RCV_DATA8();
|
|
msg->len--;
|
|
} else if (msg->flags & I2C_M_STOP) {
|
|
bfin_write_TWI_MASTER_CTL
|
|
(bfin_read_TWI_MASTER_CTL() | STOP);
|
|
SSYNC();
|
|
}
|
|
/* Clear interrupt source */
|
|
bfin_write_TWI_INT_STAT(RCVSERV);
|
|
SSYNC();
|
|
i = 0;
|
|
}
|
|
if (MERR & twi_int_stat) {
|
|
bfin_write_TWI_INT_STAT(MERR);
|
|
bfin_write_TWI_INT_MASK(0);
|
|
bfin_write_TWI_MASTER_STAT(0x3e);
|
|
bfin_write_TWI_MASTER_CTL(0);
|
|
SSYNC();
|
|
/*
|
|
* if both err and complete int stats are set,
|
|
* return proper results.
|
|
*/
|
|
if (MCOMP & twi_int_stat) {
|
|
bfin_write_TWI_INT_STAT(MCOMP);
|
|
bfin_write_TWI_INT_MASK(0);
|
|
bfin_write_TWI_MASTER_CTL(0);
|
|
SSYNC();
|
|
/*
|
|
* If it is a quick transfer,
|
|
* only address bug no data, not an err.
|
|
*/
|
|
if (msg->len == 0 && mast_stat & BUFRDERR)
|
|
return 0;
|
|
/*
|
|
* If address not acknowledged return -3,
|
|
* else return 0.
|
|
*/
|
|
else if (!(mast_stat & ANAK))
|
|
return 0;
|
|
else
|
|
return -3;
|
|
}
|
|
return -1;
|
|
}
|
|
if (MCOMP & twi_int_stat) {
|
|
bfin_write_TWI_INT_STAT(MCOMP);
|
|
SSYNC();
|
|
bfin_write_TWI_INT_MASK(0);
|
|
bfin_write_TWI_MASTER_CTL(0);
|
|
SSYNC();
|
|
return 0;
|
|
}
|
|
}
|
|
if (msg->flags & I2C_M_RD)
|
|
return -4;
|
|
else
|
|
return -2;
|
|
}
|
|
|
|
/**
|
|
* i2c_transfer: - Transfer one byte over the i2c bus
|
|
*
|
|
* This function can tranfer a byte over the i2c bus in both directions.
|
|
* It is used by the public API functions.
|
|
*
|
|
* @return: 0: transfer successful
|
|
* -1: transfer fail
|
|
* -2: transmit timeout
|
|
* -3: ACK missing
|
|
* -4: receive timeout
|
|
* -5: controller not ready
|
|
*/
|
|
int i2c_transfer(struct i2c_msg *msg)
|
|
{
|
|
int ret = 0;
|
|
int timeout_count = 10000;
|
|
int len = msg->len;
|
|
|
|
if (!(bfin_read_TWI_CONTROL() & TWI_ENA)) {
|
|
ret = -5;
|
|
goto transfer_error;
|
|
}
|
|
|
|
while (bfin_read_TWI_MASTER_STAT() & BUSBUSY)
|
|
continue;
|
|
|
|
/* Set Transmit device address */
|
|
bfin_write_TWI_MASTER_ADDR(msg->addr);
|
|
|
|
/*
|
|
* FIFO Initiation.
|
|
* Data in FIFO should be discarded before start a new operation.
|
|
*/
|
|
bfin_write_TWI_FIFO_CTL(0x3);
|
|
SSYNC();
|
|
bfin_write_TWI_FIFO_CTL(0);
|
|
SSYNC();
|
|
|
|
if (!(msg->flags & I2C_M_RD)) {
|
|
/* Transmit first data */
|
|
if (msg->len > 0) {
|
|
PRINTD("1 in i2c_transfer: buf=%d, len=%d\n", *msg->buf,
|
|
len);
|
|
bfin_write_TWI_XMT_DATA8(*(msg->buf++));
|
|
msg->len--;
|
|
SSYNC();
|
|
}
|
|
}
|
|
|
|
/* clear int stat */
|
|
bfin_write_TWI_INT_STAT(MERR | MCOMP | XMTSERV | RCVSERV);
|
|
|
|
/* Interrupt mask . Enable XMT, RCV interrupt */
|
|
bfin_write_TWI_INT_MASK(MCOMP | MERR |
|
|
((msg->flags & I2C_M_RD) ? RCVSERV : XMTSERV));
|
|
SSYNC();
|
|
|
|
if (len > 0 && len <= 255)
|
|
bfin_write_TWI_MASTER_CTL((len << 6));
|
|
else if (msg->len > 255) {
|
|
bfin_write_TWI_MASTER_CTL((0xff << 6));
|
|
msg->flags &= I2C_M_STOP;
|
|
} else
|
|
bfin_write_TWI_MASTER_CTL(0);
|
|
|
|
/* Master enable */
|
|
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
|
|
((msg->flags & I2C_M_RD)
|
|
? MDIR : 0) | ((CONFIG_TWICLK_KHZ >
|
|
100) ? FAST : 0));
|
|
SSYNC();
|
|
|
|
ret = wait_for_completion(msg, timeout_count);
|
|
PRINTD("3 in i2c_transfer: ret=%d\n", ret);
|
|
|
|
transfer_error:
|
|
switch (ret) {
|
|
case 1:
|
|
PRINTD(("i2c_transfer: error: transfer fail\n"));
|
|
break;
|
|
case 2:
|
|
PRINTD(("i2c_transfer: error: transmit timeout\n"));
|
|
break;
|
|
case 3:
|
|
PRINTD(("i2c_transfer: error: ACK missing\n"));
|
|
break;
|
|
case 4:
|
|
PRINTD(("i2c_transfer: error: receive timeout\n"));
|
|
break;
|
|
case 5:
|
|
PRINTD(("i2c_transfer: error: controller not ready\n"));
|
|
i2c_reset();
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return ret;
|
|
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------*/
|
|
/* API Functions */
|
|
/* ---------------------------------------------------------------------*/
|
|
|
|
void i2c_init(int speed, int slaveaddr)
|
|
{
|
|
i2c_reset();
|
|
}
|
|
|
|
/**
|
|
* i2c_probe: - Test if a chip answers for a given i2c address
|
|
*
|
|
* @chip: address of the chip which is searched for
|
|
* @return: 0 if a chip was found, -1 otherwhise
|
|
*/
|
|
|
|
int i2c_probe(uchar chip)
|
|
{
|
|
struct i2c_msg msg;
|
|
u8 probebuf;
|
|
|
|
i2c_reset();
|
|
|
|
probebuf = 0;
|
|
msg.addr = chip;
|
|
msg.flags = 0;
|
|
msg.len = 1;
|
|
msg.buf = &probebuf;
|
|
if (i2c_transfer(&msg))
|
|
return -1;
|
|
|
|
msg.addr = chip;
|
|
msg.flags = I2C_M_RD;
|
|
msg.len = 1;
|
|
msg.buf = &probebuf;
|
|
if (i2c_transfer(&msg))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i2c_read: - Read multiple bytes from an i2c device
|
|
*
|
|
* chip: I2C chip address, range 0..127
|
|
* addr: Memory (register) address within the chip
|
|
* alen: Number of bytes to use for addr (typically 1, 2 for larger
|
|
* memories, 0 for register type devices with only one
|
|
* register)
|
|
* buffer: Where to read/write the data
|
|
* len: How many bytes to read/write
|
|
*
|
|
* Returns: 0 on success, not 0 on failure
|
|
*/
|
|
|
|
int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
|
|
{
|
|
struct i2c_msg msg;
|
|
u8 addr_bytes[3]; /* lowest...highest byte of data address */
|
|
|
|
PRINTD("i2c_read: chip=0x%x, addr=0x%x, alen=0x%x, len=0x%x\n", chip,
|
|
addr, alen, len);
|
|
|
|
if (alen > 0) {
|
|
addr_bytes[0] = (u8) ((addr >> 0) & 0x000000FF);
|
|
addr_bytes[1] = (u8) ((addr >> 8) & 0x000000FF);
|
|
addr_bytes[2] = (u8) ((addr >> 16) & 0x000000FF);
|
|
msg.addr = chip;
|
|
msg.flags = 0;
|
|
msg.len = alen;
|
|
msg.buf = addr_bytes;
|
|
if (i2c_transfer(&msg))
|
|
return -1;
|
|
}
|
|
|
|
/* start read sequence */
|
|
PRINTD(("i2c_read: start read sequence\n"));
|
|
msg.addr = chip;
|
|
msg.flags = I2C_M_RD;
|
|
msg.len = len;
|
|
msg.buf = buffer;
|
|
if (i2c_transfer(&msg))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i2c_write: - Write multiple bytes to an i2c device
|
|
*
|
|
* chip: I2C chip address, range 0..127
|
|
* addr: Memory (register) address within the chip
|
|
* alen: Number of bytes to use for addr (typically 1, 2 for larger
|
|
* memories, 0 for register type devices with only one
|
|
* register)
|
|
* buffer: Where to read/write the data
|
|
* len: How many bytes to read/write
|
|
*
|
|
* Returns: 0 on success, not 0 on failure
|
|
*/
|
|
|
|
int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
|
|
{
|
|
struct i2c_msg msg;
|
|
u8 addr_bytes[3]; /* lowest...highest byte of data address */
|
|
|
|
PRINTD
|
|
("i2c_write: chip=0x%x, addr=0x%x, alen=0x%x, len=0x%x, buf0=0x%x\n",
|
|
chip, addr, alen, len, buffer[0]);
|
|
|
|
/* chip address write */
|
|
if (alen > 0) {
|
|
addr_bytes[0] = (u8) ((addr >> 0) & 0x000000FF);
|
|
addr_bytes[1] = (u8) ((addr >> 8) & 0x000000FF);
|
|
addr_bytes[2] = (u8) ((addr >> 16) & 0x000000FF);
|
|
msg.addr = chip;
|
|
msg.flags = 0;
|
|
msg.len = alen;
|
|
msg.buf = addr_bytes;
|
|
if (i2c_transfer(&msg))
|
|
return -1;
|
|
}
|
|
|
|
/* start read sequence */
|
|
PRINTD(("i2c_write: start write sequence\n"));
|
|
msg.addr = chip;
|
|
msg.flags = 0;
|
|
msg.len = len;
|
|
msg.buf = buffer;
|
|
if (i2c_transfer(&msg))
|
|
return -1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
uchar i2c_reg_read(uchar chip, uchar reg)
|
|
{
|
|
uchar buf;
|
|
|
|
PRINTD("i2c_reg_read: chip=0x%02x, reg=0x%02x\n", chip, reg);
|
|
i2c_read(chip, reg, 0, &buf, 1);
|
|
return (buf);
|
|
}
|
|
|
|
void i2c_reg_write(uchar chip, uchar reg, uchar val)
|
|
{
|
|
PRINTD("i2c_reg_write: chip=0x%02x, reg=0x%02x, val=0x%02x\n", chip,
|
|
reg, val);
|
|
i2c_write(chip, reg, 0, &val, 1);
|
|
}
|
|
|
|
#endif /* CONFIG_HARD_I2C */
|