u-boot/arch/arm/cpu/armv7/omap-common
Roger Quadros 3160b1b986 OMAP5+: sata/scsi: Implement scsi_init()
On OMAP platforms, SATA controller provides the SCSI subsystem
so implement scsi_init().

Get rid of the unnecessary sata_init() call from dra7xx-evm
and omap5-uevm board files.

Signed-off-by: Roger Quadros <rogerq@ti.com>
2014-10-10 09:44:42 -04:00
..
abb.c arm: omap: abb: add missing include 2013-12-12 14:54:22 -05:00
boot-common.c dra7xx_evm: Add QSPI_4 support, qspiboot build target 2014-04-17 17:24:37 -04:00
clocks-common.c ARM: OMAP4/5: Remove dead code against CONFIG_SYS_CLOCKS_ENABLE_ALL 2014-01-24 09:34:22 -05:00
emif-common.c ARM: DRA7: Enable software leveling for dra7 2014-08-25 10:48:13 -04:00
hwinit-common.c ARM: DRA: Enable VTT regulator 2014-08-25 10:48:13 -04:00
lowlevel_init.S Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
Makefile am33xx/omap: Allow cache enable for all Sitara/OMAP 2014-06-11 16:25:39 -04:00
mem-common.c ARM: omap: clean redundant PISMO_xx macros used in OMAP3 2014-07-25 16:26:12 -04:00
omap-cache.c am33xx/omap: Allow cache enable for all Sitara/OMAP 2014-06-11 16:25:39 -04:00
pipe3-phy.c ARM: OMAP5: Add Pipe3 PHY driver 2013-12-04 08:12:08 -05:00
pipe3-phy.h ARM: OMAP5: Add Pipe3 PHY driver 2013-12-04 08:12:08 -05:00
reset.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
sata.c OMAP5+: sata/scsi: Implement scsi_init() 2014-10-10 09:44:42 -04:00
timer.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
u-boot-spl.lds arm: Add missing .vectors section to linker scripts 2014-08-30 07:46:41 -04:00
utils.c OMAP: common: consolidate fake USB ethernet MAC address creation 2014-04-17 14:39:54 -04:00
vc.c ARM: OMAP4+: pmic: Make generic bus init and write functions 2013-06-10 08:43:09 -04:00