Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 18:59:44 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/davinci/ea20/ea20.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

337 lines
8.2 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2010
* Stefano Babic, DENX Software Engineering, sbabic@denx.de
*
* Based on da850evm.c, original Copyrights follow:
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
*
* Based on da830evm.c. Original Copyrights follow:
*
* Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*/
#include <common.h>
#include <i2c.h>
#include <net.h>
#include <netdev.h>
#include <asm/mach-types.h>
#include <asm/arch/hardware.h>
#include <asm/ti-common/davinci_nand.h>
#include <asm/arch/emac_defs.h>
#include <asm/io.h>
#include <asm/arch/davinci_misc.h>
#include <asm/gpio.h>
#include "../../../drivers/video/da8xx-fb.h"
DECLARE_GLOBAL_DATA_PTR;
static const struct da8xx_panel lcd_panel = {
/* Casio COM57H531x */
.name = "Casio_COM57H531x",
.width = 640,
.height = 480,
.hfp = 12,
.hbp = 144,
.hsw = 30,
.vfp = 10,
.vbp = 35,
.vsw = 3,
.pxl_clk = 25000000,
.invert_pxl_clk = 0,
};
static const struct display_panel disp_panel = {
QVGA,
16,
16,
COLOR_ACTIVE,
};
static const struct lcd_ctrl_config lcd_cfg = {
&disp_panel,
.ac_bias = 255,
.ac_bias_intrpt = 0,
.dma_burst_sz = 16,
.bpp = 16,
.fdd = 255,
.tft_alt_mode = 0,
.stn_565_mode = 0,
.mono_8bit_mode = 0,
.invert_line_clock = 1,
.invert_frm_clock = 1,
.sync_edge = 0,
.sync_ctrl = 1,
.raster_order = 0,
};
/* SPI0 pin muxer settings */
static const struct pinmux_config spi1_pins[] = {
{ pinmux(5), 1, 1 },
{ pinmux(5), 1, 2 },
{ pinmux(5), 1, 4 },
{ pinmux(5), 1, 5 }
};
/* I2C pin muxer settings */
static const struct pinmux_config i2c_pins[] = {
{ pinmux(4), 2, 2 },
{ pinmux(4), 2, 3 }
};
/* UART0 pin muxer settings */
static const struct pinmux_config uart_pins[] = {
{ pinmux(3), 2, 7 },
{ pinmux(3), 2, 6 },
{ pinmux(3), 2, 4 },
{ pinmux(3), 2, 5 }
};
#ifdef CONFIG_DRIVER_TI_EMAC
#define HAS_RMII 1
static const struct pinmux_config emac_pins[] = {
{ pinmux(14), 8, 2 },
{ pinmux(14), 8, 3 },
{ pinmux(14), 8, 4 },
{ pinmux(14), 8, 5 },
{ pinmux(14), 8, 6 },
{ pinmux(14), 8, 7 },
{ pinmux(15), 8, 1 },
{ pinmux(4), 8, 0 },
{ pinmux(4), 8, 1 }
};
#endif
#ifdef CONFIG_NAND_DAVINCI
const struct pinmux_config nand_pins[] = {
{ pinmux(7), 1, 0}, /* CS2 */
{ pinmux(7), 0, 1}, /* CS3 in three state*/
{ pinmux(7), 1, 4 }, /* EMA_WE */
{ pinmux(7), 1, 5 }, /* EMA_OE */
{ pinmux(9), 1, 0 }, /* EMA_D[7] */
{ pinmux(9), 1, 1 }, /* EMA_D[6] */
{ pinmux(9), 1, 2 }, /* EMA_D[5] */
{ pinmux(9), 1, 3 }, /* EMA_D[4] */
{ pinmux(9), 1, 4 }, /* EMA_D[3] */
{ pinmux(9), 1, 5 }, /* EMA_D[2] */
{ pinmux(9), 1, 6 }, /* EMA_D[1] */
{ pinmux(9), 1, 7 }, /* EMA_D[0] */
{ pinmux(12), 1, 5 }, /* EMA_A[2] */
{ pinmux(12), 1, 6 }, /* EMA_A[1] */
{ pinmux(6), 1, 0 } /* EMA_CLK */
};
#endif
const struct pinmux_config gpio_pins[] = {
{ pinmux(13), 8, 0 }, /* GPIO6[15] RESETOUTn on SOM*/
{ pinmux(13), 8, 5 }, /* GPIO6[10] U0_SW0 on EA20-00101_2*/
{ pinmux(13), 8, 3 }, /* GPIO6[12] U0_SW1 on EA20-00101_2*/
{ pinmux(19), 8, 5 }, /* GPIO6[1] DISP_ON */
{ pinmux(14), 8, 1 } /* GPIO6[6] LCD_B_PWR*/
};
const struct pinmux_config lcd_pins[] = {
{ pinmux(17), 2, 1 }, /* LCD_D_0 */
{ pinmux(17), 2, 0 }, /* LCD_D_1 */
{ pinmux(16), 2, 7 }, /* LCD_D_2 */
{ pinmux(16), 2, 6 }, /* LCD_D_3 */
{ pinmux(16), 2, 5 }, /* LCD_D_4 */
{ pinmux(16), 2, 4 }, /* LCD_D_5 */
{ pinmux(16), 2, 3 }, /* LCD_D_6 */
{ pinmux(16), 2, 2 }, /* LCD_D_7 */
{ pinmux(18), 2, 1 }, /* LCD_D_8 */
{ pinmux(18), 2, 0 }, /* LCD_D_9 */
{ pinmux(17), 2, 7 }, /* LCD_D_10 */
{ pinmux(17), 2, 6 }, /* LCD_D_11 */
{ pinmux(17), 2, 5 }, /* LCD_D_12 */
{ pinmux(17), 2, 4 }, /* LCD_D_13 */
{ pinmux(17), 2, 3 }, /* LCD_D_14 */
{ pinmux(17), 2, 2 }, /* LCD_D_15 */
{ pinmux(18), 2, 6 }, /* LCD_PCLK */
{ pinmux(19), 2, 0 }, /* LCD_HSYNC */
{ pinmux(19), 2, 1 }, /* LCD_VSYNC */
{ pinmux(19), 2, 6 }, /* DA850_NLCD_AC_ENB_CS */
};
const struct pinmux_config halten_pin[] = {
{ pinmux(3), 4, 2 } /* GPIO8[6] HALTEN */
};
static const struct pinmux_resource pinmuxes[] = {
#ifdef CONFIG_SPI_FLASH
PINMUX_ITEM(spi1_pins),
#endif
PINMUX_ITEM(uart_pins),
PINMUX_ITEM(i2c_pins),
#ifdef CONFIG_NAND_DAVINCI
PINMUX_ITEM(nand_pins),
#endif
#ifdef CONFIG_VIDEO
PINMUX_ITEM(lcd_pins),
#endif
};
static const struct lpsc_resource lpsc[] = {
{ DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
{ DAVINCI_LPSC_SPI1 }, /* Serial Flash */
{ DAVINCI_LPSC_EMAC }, /* image download */
{ DAVINCI_LPSC_UART0 }, /* console */
{ DAVINCI_LPSC_GPIO },
{ DAVINCI_LPSC_LCDC }, /* LCD */
};
int board_early_init_f(void)
{
/* PinMux for GPIO */
if (davinci_configure_pin_mux(gpio_pins, ARRAY_SIZE(gpio_pins)) != 0)
return 1;
/* Set DISP_ON high to enable LCD output*/
gpio_direction_output(97, 1);
/* Set the RESETOUTn low */
gpio_direction_output(111, 0);
/* Set U0_SW0 low for UART0 as console*/
gpio_direction_output(106, 0);
/* Set U0_SW1 low for UART0 as console*/
gpio_direction_output(108, 0);
/* Set LCD_B_PWR low to power down LCD Backlight*/
gpio_direction_output(102, 0);
irq_init();
/*
* NAND CS setup - cycle counts based on da850evm NAND timings in the
* Linux kernel @ 25MHz EMIFA
*/
#ifdef CONFIG_NAND_DAVINCI
writel((DAVINCI_ABCR_WSETUP(0) |
DAVINCI_ABCR_WSTROBE(1) |
DAVINCI_ABCR_WHOLD(0) |
DAVINCI_ABCR_RSETUP(0) |
DAVINCI_ABCR_RSTROBE(1) |
DAVINCI_ABCR_RHOLD(0) |
DAVINCI_ABCR_TA(0) |
DAVINCI_ABCR_ASIZE_8BIT),
&davinci_emif_regs->ab1cr); /* CS2 */
#endif
/*
* Power on required peripherals
* ARM does not have access by default to PSC0 and PSC1
* assuming here that the DSP bootloader has set the IOPU
* such that PSC access is available to ARM
*/
if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
return 1;
/* setup the SUSPSRC for ARM to control emulation suspend */
writel(readl(&davinci_syscfg_regs->suspsrc) &
~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
DAVINCI_SYSCFG_SUSPSRC_UART0),
&davinci_syscfg_regs->suspsrc);
/* configure pinmux settings */
if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
return 1;
#ifdef CONFIG_DRIVER_TI_EMAC
if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0)
return 1;
davinci_emac_mii_mode_sel(HAS_RMII);
#endif /* CONFIG_DRIVER_TI_EMAC */
/* enable the console UART */
writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
DAVINCI_UART_PWREMU_MGMT_UTRST),
&davinci_uart0_ctrl_regs->pwremu_mgmt);
/*
* Reconfigure the LCDC priority to the highest to ensure that
* the throughput/latency requirements for the LCDC are met.
*/
writel(readl(&davinci_syscfg_regs->mstpri[2]) & 0x0fffffff,
&davinci_syscfg_regs->mstpri[2]);
return 0;
}
/*
* Do not overwrite the console
* Use always serial for U-Boot console
*/
int overwrite_console(void)
{
return 1;
}
int board_init(void)
{
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_EA20;
/* address of boot parameters */
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
da8xx_video_init(&lcd_panel, &lcd_cfg, 16);
return 0;
}
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
unsigned char buf[2];
int ret;
/* PinMux for HALTEN */
if (davinci_configure_pin_mux(halten_pin, ARRAY_SIZE(halten_pin)) != 0)
return 1;
/* Set HALTEN to high */
gpio_direction_output(134, 1);
/* Set fixed contrast settings for LCD via I2C potentiometer */
buf[0] = 0x00;
buf[1] = 0xd7;
ret = i2c_write(0x2e, 6, 1, buf, 2);
if (ret)
puts("\nContrast Settings FAILED\n");
/* Set LCD_B_PWR high to power up LCD Backlight*/
gpio_set_value(102, 1);
return 0;
}
#endif /* CONFIG_BOARD_LATE_INIT */
#ifdef CONFIG_DRIVER_TI_EMAC
/*
* Initializes on-board ethernet controllers.
*/
int board_eth_init(bd_t *bis)
{
if (!davinci_emac_initialize()) {
printf("Error: Ethernet init failed!\n");
return -1;
}
/*
* This board has a RMII PHY. However, the MDC line on the SOM
* must not be disabled (there is no MII PHY on the
* baseboard) via the GPIO2[6], because this pin
* disables at the same time the SPI flash.
*/
return 0;
}
#endif /* CONFIG_DRIVER_TI_EMAC */
Reference in a new issue View git blame Copy permalink