mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
3fb08a2138
This patch adds support for the Rockchip serial flash controller found on the PX30 SoC. It should work for versions 3-5 of the SFC IP, however I am only able to test it on v3. This is adapted from the WIP SPI-MEM driver for the SFC on mainline Linux. Note that the main difference between this and earlier versions of the driver is that this one does not support DMA. In testing the performance difference (performing a dual mode read on a 128Mb chip) is negligible. DMA, if used, must also be disabled in SPL mode when using A-TF anyway. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
73 lines
2.7 KiB
Makefile
73 lines
2.7 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# (C) Copyright 2000-2007
|
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
|
|
# There are many options which enable SPI, so make this library available
|
|
ifdef CONFIG_$(SPL_TPL_)DM_SPI
|
|
obj-y += spi-uclass.o
|
|
obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o
|
|
obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
|
|
obj-$(CONFIG_SOFT_SPI) += soft_spi.o
|
|
obj-$(CONFIG_SPI_MEM) += spi-mem.o
|
|
obj-$(CONFIG_TI_QSPI) += ti_qspi.o
|
|
obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o
|
|
else
|
|
obj-y += spi.o
|
|
obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o
|
|
endif
|
|
|
|
obj-$(CONFIG_ALTERA_SPI) += altera_spi.o
|
|
obj-$(CONFIG_ATH79_SPI) += ath79_spi.o
|
|
obj-$(CONFIG_ATMEL_QSPI) += atmel-quadspi.o
|
|
obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o
|
|
obj-$(CONFIG_BCM63XX_HSSPI) += bcm63xx_hsspi.o
|
|
obj-$(CONFIG_BCM63XX_SPI) += bcm63xx_spi.o
|
|
obj-$(CONFIG_BCMSTB_SPI) += bcmstb_spi.o
|
|
obj-$(CONFIG_CF_SPI) += cf_spi.o
|
|
obj-$(CONFIG_CORTINA_SFLASH) += ca_sflash.o
|
|
obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
|
|
obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o
|
|
obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
|
|
obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o
|
|
obj-$(CONFIG_FSL_ESPI) += fsl_espi.o
|
|
obj-$(CONFIG_SYNQUACER_SPI) += spi-synquacer.o
|
|
obj-$(CONFIG_ICH_SPI) += ich.o
|
|
obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
|
|
obj-$(CONFIG_MESON_SPIFC) += meson_spifc.o
|
|
obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o
|
|
obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
|
|
obj-$(CONFIG_MTK_SNFI_SPI) += mtk_snfi_spi.o
|
|
obj-$(CONFIG_MTK_SNOR) += mtk_snor.o
|
|
obj-$(CONFIG_MT7620_SPI) += mt7620_spi.o
|
|
obj-$(CONFIG_MT7621_SPI) += mt7621_spi.o
|
|
obj-$(CONFIG_MSCC_BB_SPI) += mscc_bb_spi.o
|
|
obj-$(CONFIG_MVEBU_A3700_SPI) += mvebu_a3700_spi.o
|
|
obj-$(CONFIG_MXC_SPI) += mxc_spi.o
|
|
obj-$(CONFIG_MXS_SPI) += mxs_spi.o
|
|
obj-$(CONFIG_NXP_FSPI) += nxp_fspi.o
|
|
obj-$(CONFIG_ATCSPI200_SPI) += atcspi200_spi.o
|
|
obj-$(CONFIG_OCTEON_SPI) += octeon_spi.o
|
|
obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o
|
|
obj-$(CONFIG_PIC32_SPI) += pic32_spi.o
|
|
obj-$(CONFIG_PL022_SPI) += pl022_spi.o
|
|
obj-$(CONFIG_SPI_QUP) += spi-qup.o
|
|
obj-$(CONFIG_SPI_MXIC) += spi-mxic.o
|
|
obj-$(CONFIG_RENESAS_RPC_SPI) += renesas_rpc_spi.o
|
|
obj-$(CONFIG_ROCKCHIP_SFC) += rockchip_sfc.o
|
|
obj-$(CONFIG_ROCKCHIP_SPI) += rk_spi.o
|
|
obj-$(CONFIG_SANDBOX_SPI) += sandbox_spi.o
|
|
obj-$(CONFIG_SPI_SIFIVE) += spi-sifive.o
|
|
obj-$(CONFIG_SPI_SUNXI) += spi-sunxi.o
|
|
obj-$(CONFIG_SH_QSPI) += sh_qspi.o
|
|
obj-$(CONFIG_STM32_QSPI) += stm32_qspi.o
|
|
obj-$(CONFIG_STM32_SPI) += stm32_spi.o
|
|
obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o
|
|
obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
|
|
obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
|
|
obj-$(CONFIG_TEGRA210_QSPI) += tegra210_qspi.o
|
|
obj-$(CONFIG_UNIPHIER_SPI) += uniphier_spi.o
|
|
obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o
|
|
obj-$(CONFIG_ZYNQ_SPI) += zynq_spi.o
|
|
obj-$(CONFIG_ZYNQ_QSPI) += zynq_qspi.o
|
|
obj-$(CONFIG_ZYNQMP_GQSPI) += zynqmp_gqspi.o
|