u-boot/include/configs/ti_omap3_common.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

70 lines
1.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* ti_omap3_common.h
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* For more details, please see the technical documents listed at
* http://www.ti.com/product/omap3530
* http://www.ti.com/product/omap3630
* http://www.ti.com/product/dm3730
*/
#ifndef __CONFIG_TI_OMAP3_COMMON_H__
#define __CONFIG_TI_OMAP3_COMMON_H__
/*
* High Level Configuration Options
*/
#include <asm/arch/cpu.h>
#include <asm/arch/omap.h>
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
/* NS16550 Configuration */
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
#if defined(CONFIG_SPL_BUILD)
#define CONFIG_SYS_NS16550_SERIAL
#if !defined(CONFIG_DM_SERIAL)
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#endif /* !CONFIG_DM_SERIAL */
#endif /* CONFIG_SPL_BUILD */
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \
115200}
/* Select serial console configuration */
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
#define CONFIG_SERIAL3 3
#endif
/* Physical Memory Map */
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/*
* OMAP3 has 12 GP timers, they can be driven by the system clock
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
* This rate is divided by a local divisor.
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
/* SPL */
#define CONFIG_SPL_TEXT_BASE 0x40200800
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(64 << 20))
#ifdef CONFIG_NAND
#define CONFIG_SYS_NAND_BASE 0x30000000
#endif
/* Now bring in the rest of the common code. */
#include <configs/ti_armv7_omap.h>
#endif /* __CONFIG_TI_OMAP3_COMMON_H__ */