u-boot/include/configs/imx6-engicam.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

210 lines
5.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
*
* Configuration settings for the Engicam i.MX6 SOM Starter Kits.
*/
#ifndef __IMX6_ENGICAM_CONFIG_H
#define __IMX6_ENGICAM_CONFIG_H
#include <linux/sizes.h>
#include "mx6_common.h"
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
/* Total Size of Environment Sector */
#define CONFIG_ENV_SIZE SZ_128K
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
/* Environment */
#ifndef CONFIG_ENV_IS_NOWHERE
/* Environment in MMC */
# if defined(CONFIG_ENV_IS_IN_MMC)
# define CONFIG_ENV_OFFSET 0x100000
/* Environment in NAND */
# elif defined(CONFIG_ENV_IS_IN_NAND)
# define CONFIG_ENV_OFFSET 0x400000
# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
# endif
#endif
/* Default environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"splashpos=m,m\0" \
"image=uImage\0" \
"fit_image=fit.itb\0" \
"fdt_high=0xffffffff\0" \
"fdt_addr=" FDT_ADDR "\0" \
"boot_fdt=try\0" \
"mmcpart=1\0" \
"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"ubiargs=setenv bootargs console=${console},${baudrate} " \
"ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
"fitboot=echo Booting FIT image from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
"_mmcboot=run mmcargs; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootm; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
"bootm; " \
"fi\0" \
"mmcboot=echo Booting from mmc ...; " \
"if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"if run loadfit; then " \
"run fitboot; " \
"else " \
"if run loadimage; then " \
"run _mmcboot; " \
"fi; " \
"fi; " \
"fi; " \
"fi\0" \
"nandboot=echo Booting from nand ...; " \
"if mtdparts; then " \
"echo Starting nand boot ...; " \
"else " \
"mtdparts default; " \
"fi; " \
"run ubiargs; " \
"nand read ${loadaddr} kernel 0x800000; " \
"nand read ${fdt_addr} dtb 0x100000; " \
"bootm ${loadaddr} - ${fdt_addr}\0"
#define CONFIG_BOOTCOMMAND "run $modeboot"
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
#ifdef CONFIG_MX6UL
# define DRAM_OFFSET(x) 0x87##x
# define FDT_ADDR __stringify(DRAM_OFFSET(800000))
#else
# define DRAM_OFFSET(x) 0x1##x
# define FDT_ADDR __stringify(DRAM_OFFSET(8000000))
#endif
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_SP_OFFSET)
/* UART */
#ifdef CONFIG_MXC_UART
# ifdef CONFIG_MX6UL
# define CONFIG_MXC_UART_BASE UART1_BASE
# else
# define CONFIG_MXC_UART_BASE UART4_BASE
# endif
#endif
/* MMC */
#ifdef CONFIG_FSL_USDHC
# define CONFIG_SYS_MMC_ENV_DEV 0
#endif
/* NAND */
#ifdef CONFIG_NAND_MXS
# define CONFIG_SYS_MAX_NAND_DEVICE 1
# define CONFIG_SYS_NAND_BASE 0x40000000
# define CONFIG_SYS_NAND_5_ADDR_CYCLE
# define CONFIG_SYS_NAND_ONFI_DETECTION
# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
# define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
/* MTD device */
# define CONFIG_MTD_DEVICE
# define CONFIG_MTD_PARTITIONS
#endif
/* Ethernet */
#ifdef CONFIG_FEC_MXC
# ifdef CONFIG_TARGET_MX6Q_ICORE_RQS
# define CONFIG_FEC_MXC_PHYADDR 3
# define CONFIG_FEC_XCV_TYPE RGMII
# else
# define CONFIG_FEC_MXC_PHYADDR 0
# define CONFIG_FEC_XCV_TYPE RMII
# endif
# define CONFIG_MII
#endif
/* Falcon Mode */
#ifdef CONFIG_SPL_OS_BOOT
# define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
# define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
# define CONFIG_CMD_SPL
# define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
# define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K)
/* MMC support: args@1MB kernel@2MB */
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
#endif
/* Framebuffer */
#ifdef CONFIG_VIDEO_IPUV3
# define CONFIG_IMX_VIDEO_SKIP
# define CONFIG_SPLASH_SCREEN
# define CONFIG_SPLASH_SCREEN_ALIGN
# define CONFIG_BMP_16BPP
# define CONFIG_VIDEO_BMP_RLE8
# define CONFIG_VIDEO_LOGO
# define CONFIG_VIDEO_BMP_LOGO
#endif
/* SPL */
#ifdef CONFIG_SPL
# ifdef CONFIG_ENV_IS_IN_NAND
# define CONFIG_SPL_NAND_SUPPORT
# else
# define CONFIG_SPL_MMC_SUPPORT
# endif
# include "imx6_spl.h"
#endif
#endif /* __IMX6_ENGICAM_CONFIG_H */