mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
30cf7f818d
Remove dependency of SYS_HAS_SERDES for Layerscape Chasis 2 and Layerscape Chasis 3. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
518 lines
14 KiB
Text
518 lines
14 KiB
Text
config ARCH_LS1012A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select ARM_ERRATA_855873
|
|
select FSL_LSCH2
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_DDR_BE
|
|
select SYS_FSL_MMDC
|
|
select SYS_FSL_ERRATUM_A010315
|
|
select SYS_FSL_ERRATUM_A009798
|
|
select SYS_FSL_ERRATUM_A008997
|
|
select SYS_FSL_ERRATUM_A009007
|
|
select SYS_FSL_ERRATUM_A009008
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
imply PANIC_HANG
|
|
|
|
config ARCH_LS1043A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select ARM_ERRATA_855873
|
|
select FSL_LSCH2
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_DDR
|
|
select SYS_FSL_DDR_BE
|
|
select SYS_FSL_DDR_VER_50
|
|
select SYS_FSL_ERRATUM_A008850
|
|
select SYS_FSL_ERRATUM_A008997
|
|
select SYS_FSL_ERRATUM_A009007
|
|
select SYS_FSL_ERRATUM_A009008
|
|
select SYS_FSL_ERRATUM_A009660
|
|
select SYS_FSL_ERRATUM_A009663
|
|
select SYS_FSL_ERRATUM_A009798
|
|
select SYS_FSL_ERRATUM_A009929
|
|
select SYS_FSL_ERRATUM_A009942
|
|
select SYS_FSL_ERRATUM_A010315
|
|
select SYS_FSL_ERRATUM_A010539
|
|
select SYS_FSL_HAS_DDR3
|
|
select SYS_FSL_HAS_DDR4
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
imply CMD_PCI
|
|
|
|
config ARCH_LS1046A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select FSL_LSCH2
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_DDR
|
|
select SYS_FSL_DDR_BE
|
|
select SYS_FSL_DDR_VER_50
|
|
select SYS_FSL_ERRATUM_A008336
|
|
select SYS_FSL_ERRATUM_A008511
|
|
select SYS_FSL_ERRATUM_A008850
|
|
select SYS_FSL_ERRATUM_A008997
|
|
select SYS_FSL_ERRATUM_A009007
|
|
select SYS_FSL_ERRATUM_A009008
|
|
select SYS_FSL_ERRATUM_A009798
|
|
select SYS_FSL_ERRATUM_A009801
|
|
select SYS_FSL_ERRATUM_A009803
|
|
select SYS_FSL_ERRATUM_A009942
|
|
select SYS_FSL_ERRATUM_A010165
|
|
select SYS_FSL_ERRATUM_A010539
|
|
select SYS_FSL_HAS_DDR4
|
|
select SYS_FSL_SRDS_2
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
|
|
config ARCH_LS1088A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select ARM_ERRATA_855873
|
|
select FSL_LSCH3
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_DDR
|
|
select SYS_FSL_DDR_LE
|
|
select SYS_FSL_DDR_VER_50
|
|
select SYS_FSL_EC1
|
|
select SYS_FSL_EC2
|
|
select SYS_FSL_ERRATUM_A009803
|
|
select SYS_FSL_ERRATUM_A009942
|
|
select SYS_FSL_ERRATUM_A010165
|
|
select SYS_FSL_ERRATUM_A008511
|
|
select SYS_FSL_ERRATUM_A008850
|
|
select SYS_FSL_ERRATUM_A009007
|
|
select SYS_FSL_HAS_CCI400
|
|
select SYS_FSL_HAS_DDR4
|
|
select SYS_FSL_HAS_RGMII
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_SEC_COMPAT_5
|
|
select SYS_FSL_SEC_LE
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_FSL_SRDS_2
|
|
select FSL_TZASC_1
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
imply SCSI
|
|
imply PANIC_HANG
|
|
|
|
config ARCH_LS2080A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select ARM_ERRATA_826974
|
|
select ARM_ERRATA_828024
|
|
select ARM_ERRATA_829520
|
|
select ARM_ERRATA_833471
|
|
select FSL_LSCH3
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_DDR
|
|
select SYS_FSL_DDR_LE
|
|
select SYS_FSL_DDR_VER_50
|
|
select SYS_FSL_HAS_CCN504
|
|
select SYS_FSL_HAS_DP_DDR
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_HAS_DDR4
|
|
select SYS_FSL_SEC_COMPAT_5
|
|
select SYS_FSL_SEC_LE
|
|
select SYS_FSL_SRDS_2
|
|
select FSL_TZASC_1
|
|
select FSL_TZASC_2
|
|
select SYS_FSL_ERRATUM_A008336
|
|
select SYS_FSL_ERRATUM_A008511
|
|
select SYS_FSL_ERRATUM_A008514
|
|
select SYS_FSL_ERRATUM_A008585
|
|
select SYS_FSL_ERRATUM_A008997
|
|
select SYS_FSL_ERRATUM_A009007
|
|
select SYS_FSL_ERRATUM_A009008
|
|
select SYS_FSL_ERRATUM_A009635
|
|
select SYS_FSL_ERRATUM_A009663
|
|
select SYS_FSL_ERRATUM_A009798
|
|
select SYS_FSL_ERRATUM_A009801
|
|
select SYS_FSL_ERRATUM_A009803
|
|
select SYS_FSL_ERRATUM_A009942
|
|
select SYS_FSL_ERRATUM_A010165
|
|
select SYS_FSL_ERRATUM_A009203
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
imply PANIC_HANG
|
|
|
|
config FSL_LSCH2
|
|
bool
|
|
select SYS_FSL_HAS_CCI400
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_SEC_COMPAT_5
|
|
select SYS_FSL_SEC_BE
|
|
|
|
config FSL_LSCH3
|
|
bool
|
|
|
|
config FSL_MC_ENET
|
|
bool "Management Complex network"
|
|
depends on ARCH_LS2080A || ARCH_LS1088A
|
|
default y
|
|
select RESV_RAM
|
|
help
|
|
Enable Management Complex (MC) network
|
|
|
|
menu "Layerscape architecture"
|
|
depends on FSL_LSCH2 || FSL_LSCH3
|
|
|
|
config FSL_PCIE_COMPAT
|
|
string "PCIe compatible of Kernel DT"
|
|
depends on PCIE_LAYERSCAPE
|
|
default "fsl,ls1012a-pcie" if ARCH_LS1012A
|
|
default "fsl,ls1043a-pcie" if ARCH_LS1043A
|
|
default "fsl,ls1046a-pcie" if ARCH_LS1046A
|
|
default "fsl,ls2080a-pcie" if ARCH_LS2080A
|
|
default "fsl,ls1088a-pcie" if ARCH_LS1088A
|
|
help
|
|
This compatible is used to find pci controller node in Kernel DT
|
|
to complete fixup.
|
|
|
|
config HAS_FEATURE_GIC64K_ALIGN
|
|
bool
|
|
default y if ARCH_LS1043A
|
|
|
|
config HAS_FEATURE_ENHANCED_MSI
|
|
bool
|
|
default y if ARCH_LS1043A
|
|
|
|
menu "Layerscape PPA"
|
|
config FSL_LS_PPA
|
|
bool "FSL Layerscape PPA firmware support"
|
|
depends on !ARMV8_PSCI
|
|
select ARMV8_SEC_FIRMWARE_SUPPORT
|
|
select SEC_FIRMWARE_ARMV8_PSCI
|
|
select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2
|
|
help
|
|
The FSL Primary Protected Application (PPA) is a software component
|
|
which is loaded during boot stage, and then remains resident in RAM
|
|
and runs in the TrustZone after boot.
|
|
Say y to enable it.
|
|
|
|
config SPL_FSL_LS_PPA
|
|
bool "FSL Layerscape PPA firmware support for SPL build"
|
|
depends on !ARMV8_PSCI
|
|
select SPL_ARMV8_SEC_FIRMWARE_SUPPORT
|
|
select SEC_FIRMWARE_ARMV8_PSCI
|
|
select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2
|
|
help
|
|
The FSL Primary Protected Application (PPA) is a software component
|
|
which is loaded during boot stage, and then remains resident in RAM
|
|
and runs in the TrustZone after boot. This is to load PPA during SPL
|
|
stage instead of the RAM version of U-Boot. Once PPA is initialized,
|
|
the rest of U-Boot (including RAM version) runs at EL2.
|
|
choice
|
|
prompt "FSL Layerscape PPA firmware loading-media select"
|
|
depends on FSL_LS_PPA
|
|
default SYS_LS_PPA_FW_IN_MMC if SD_BOOT
|
|
default SYS_LS_PPA_FW_IN_NAND if NAND_BOOT
|
|
default SYS_LS_PPA_FW_IN_XIP
|
|
|
|
config SYS_LS_PPA_FW_IN_XIP
|
|
bool "XIP"
|
|
help
|
|
Say Y here if the PPA firmware locate at XIP flash, such
|
|
as NOR or QSPI flash.
|
|
|
|
config SYS_LS_PPA_FW_IN_MMC
|
|
bool "eMMC or SD Card"
|
|
help
|
|
Say Y here if the PPA firmware locate at eMMC/SD card.
|
|
|
|
config SYS_LS_PPA_FW_IN_NAND
|
|
bool "NAND"
|
|
help
|
|
Say Y here if the PPA firmware locate at NAND flash.
|
|
|
|
endchoice
|
|
|
|
config SYS_LS_PPA_FW_ADDR
|
|
hex "Address of PPA firmware loading from"
|
|
depends on FSL_LS_PPA
|
|
default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
|
|
default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
|
|
default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
|
|
default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
|
|
default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
|
|
default 0x400000 if SYS_LS_PPA_FW_IN_MMC
|
|
default 0x400000 if SYS_LS_PPA_FW_IN_NAND
|
|
|
|
help
|
|
If the PPA firmware locate at XIP flash, such as NOR or
|
|
QSPI flash, this address is a directly memory-mapped.
|
|
If it is in a serial accessed flash, such as NAND and SD
|
|
card, it is a byte offset.
|
|
|
|
config SYS_LS_PPA_ESBC_ADDR
|
|
hex "hdr address of PPA firmware loading from"
|
|
depends on FSL_LS_PPA && CHAIN_OF_TRUST
|
|
default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
|
|
default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
|
|
default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
|
|
default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
|
|
default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
|
|
default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
|
|
default 0x680000 if SYS_LS_PPA_FW_IN_MMC
|
|
default 0x680000 if SYS_LS_PPA_FW_IN_NAND
|
|
help
|
|
If the PPA header firmware locate at XIP flash, such as NOR or
|
|
QSPI flash, this address is a directly memory-mapped.
|
|
If it is in a serial accessed flash, such as NAND and SD
|
|
card, it is a byte offset.
|
|
|
|
config LS_PPA_ESBC_HDR_SIZE
|
|
hex "Length of PPA ESBC header"
|
|
depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP
|
|
default 0x2000
|
|
help
|
|
Length (in bytes) of PPA ESBC header to be copied from MMC/SD or
|
|
NAND to memory to validate PPA image.
|
|
|
|
endmenu
|
|
|
|
config SYS_FSL_ERRATUM_A008997
|
|
bool "Workaround for USB PHY erratum A008997"
|
|
|
|
config SYS_FSL_ERRATUM_A009007
|
|
bool
|
|
help
|
|
Workaround for USB PHY erratum A009007
|
|
|
|
config SYS_FSL_ERRATUM_A009008
|
|
bool "Workaround for USB PHY erratum A009008"
|
|
|
|
config SYS_FSL_ERRATUM_A009798
|
|
bool "Workaround for USB PHY erratum A009798"
|
|
|
|
config SYS_FSL_ERRATUM_A010315
|
|
bool "Workaround for PCIe erratum A010315"
|
|
|
|
config SYS_FSL_ERRATUM_A010539
|
|
bool "Workaround for PIN MUX erratum A010539"
|
|
|
|
config MAX_CPUS
|
|
int "Maximum number of CPUs permitted for Layerscape"
|
|
default 4 if ARCH_LS1043A
|
|
default 4 if ARCH_LS1046A
|
|
default 16 if ARCH_LS2080A
|
|
default 8 if ARCH_LS1088A
|
|
default 1
|
|
help
|
|
Set this number to the maximum number of possible CPUs in the SoC.
|
|
SoCs may have multiple clusters with each cluster may have multiple
|
|
ports. If some ports are reserved but higher ports are used for
|
|
cores, count the reserved ports. This will allocate enough memory
|
|
in spin table to properly handle all cores.
|
|
|
|
config SECURE_BOOT
|
|
bool "Secure Boot"
|
|
help
|
|
Enable Freescale Secure Boot feature
|
|
|
|
config QSPI_AHB_INIT
|
|
bool "Init the QSPI AHB bus"
|
|
help
|
|
The default setting for QSPI AHB bus just support 3bytes addressing.
|
|
But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
|
|
bus for those flashes to support the full QSPI flash size.
|
|
|
|
config SYS_CCI400_OFFSET
|
|
hex "Offset for CCI400 base"
|
|
depends on SYS_FSL_HAS_CCI400
|
|
default 0x3090000 if ARCH_LS1088A
|
|
default 0x180000 if FSL_LSCH2
|
|
help
|
|
Offset for CCI400 base
|
|
CCI400 base addr = CCSRBAR + CCI400_OFFSET
|
|
|
|
config SYS_FSL_IFC_BANK_COUNT
|
|
int "Maximum banks of Integrated flash controller"
|
|
depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A
|
|
default 4 if ARCH_LS1043A
|
|
default 4 if ARCH_LS1046A
|
|
default 8 if ARCH_LS2080A || ARCH_LS1088A
|
|
|
|
config SYS_FSL_HAS_CCI400
|
|
bool
|
|
|
|
config SYS_FSL_HAS_CCN504
|
|
bool
|
|
|
|
config SYS_FSL_HAS_DP_DDR
|
|
bool
|
|
|
|
config SYS_FSL_SRDS_1
|
|
bool
|
|
|
|
config SYS_FSL_SRDS_2
|
|
bool
|
|
|
|
config SYS_HAS_SERDES
|
|
bool
|
|
|
|
config FSL_TZASC_1
|
|
bool
|
|
|
|
config FSL_TZASC_2
|
|
bool
|
|
|
|
endmenu
|
|
|
|
menu "Layerscape clock tree configuration"
|
|
depends on FSL_LSCH2 || FSL_LSCH3
|
|
|
|
config SYS_FSL_CLK
|
|
bool "Enable clock tree initialization"
|
|
default y
|
|
|
|
config CLUSTER_CLK_FREQ
|
|
int "Reference clock of core cluster"
|
|
depends on ARCH_LS1012A
|
|
default 100000000
|
|
help
|
|
This number is the reference clock frequency of core PLL.
|
|
For most platforms, the core PLL and Platform PLL have the same
|
|
reference clock, but for some platforms, LS1012A for instance,
|
|
they are provided sepatately.
|
|
|
|
config SYS_FSL_PCLK_DIV
|
|
int "Platform clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 1 if ARCH_LS1046A
|
|
default 1 if ARCH_LS1088A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive Platform clock from
|
|
Platform PLL, in another word:
|
|
Platform_clk = Platform_PLL_freq / this_divider
|
|
|
|
config SYS_FSL_DSPI_CLK_DIV
|
|
int "DSPI clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive DSPI clock from Platform
|
|
clock, in another word DSPI_clk = Platform_clk / this_divider.
|
|
|
|
config SYS_FSL_DUART_CLK_DIV
|
|
int "DUART clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive DUART clock from Platform
|
|
clock, in another word DUART_clk = Platform_clk / this_divider.
|
|
|
|
config SYS_FSL_I2C_CLK_DIV
|
|
int "I2C clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive I2C clock from Platform
|
|
clock, in another word I2C_clk = Platform_clk / this_divider.
|
|
|
|
config SYS_FSL_IFC_CLK_DIV
|
|
int "IFC clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive IFC clock from Platform
|
|
clock, in another word IFC_clk = Platform_clk / this_divider.
|
|
|
|
config SYS_FSL_LPUART_CLK_DIV
|
|
int "LPUART clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive LPUART clock from Platform
|
|
clock, in another word LPUART_clk = Platform_clk / this_divider.
|
|
|
|
config SYS_FSL_SDHC_CLK_DIV
|
|
int "SDHC clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 1 if ARCH_LS1012A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive SDHC clock from Platform
|
|
clock, in another word SDHC_clk = Platform_clk / this_divider.
|
|
endmenu
|
|
|
|
config RESV_RAM
|
|
bool
|
|
help
|
|
Reserve memory from the top, tracked by gd->arch.resv_ram. This
|
|
reserved RAM can be used by special driver that resides in memory
|
|
after U-Boot exits. It's up to implementation to allocate and allow
|
|
access to this reserved memory. For example, the reserved RAM can
|
|
be at the high end of physical memory. The reserve RAM may be
|
|
excluded from memory bank(s) passed to OS, or marked as reserved.
|
|
|
|
config SYS_FSL_EC1
|
|
bool
|
|
help
|
|
Ethernet controller 1, this is connected to MAC3.
|
|
Provides DPAA2 capabilities
|
|
|
|
config SYS_FSL_EC2
|
|
bool
|
|
help
|
|
Ethernet controller 2, this is connected to MAC4.
|
|
Provides DPAA2 capabilities
|
|
|
|
config SYS_FSL_ERRATUM_A008336
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A008514
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A008585
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A008850
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A009203
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A009635
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A009660
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A009929
|
|
bool
|
|
|
|
|
|
config SYS_FSL_HAS_RGMII
|
|
bool
|
|
depends on SYS_FSL_EC1 || SYS_FSL_EC2
|
|
|
|
|
|
config SYS_MC_RSV_MEM_ALIGN
|
|
hex "Management Complex reserved memory alignment"
|
|
depends on RESV_RAM
|
|
default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A
|
|
help
|
|
Reserved memory needs to be aligned for MC to use. Default value
|
|
is 512MB.
|
|
|
|
config SPL_LDSCRIPT
|
|
default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
|
|
|
|
config HAS_FSL_XHCI_USB
|
|
bool
|
|
default y if ARCH_LS1043A || ARCH_LS1046A
|
|
help
|
|
For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
|
|
pins, select it when the pins are assigned to USB.
|