mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
24b852a7a2
The console includes a global variable and several functions that are only used by a small subset of U-Boot files. Before adding more functions, move the definitions into their own header file. Signed-off-by: Simon Glass <sjg@chromium.org>
554 lines
13 KiB
C
554 lines
13 KiB
C
/*
|
|
* (C) Copyright 2007-2008
|
|
* Matthias Fuchs, esd Gmbh, matthias.fuchs@esd-electronics.com.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <console.h>
|
|
#include <asm/io.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/processor.h>
|
|
#if defined(CONFIG_LOGBUFFER)
|
|
#include <logbuff.h>
|
|
#endif
|
|
|
|
#include "pmc440.h"
|
|
|
|
int is_monarch(void);
|
|
int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
|
|
uchar *buffer, unsigned cnt);
|
|
int eeprom_write_enable(unsigned dev_addr, int state);
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_CMD_BSP)
|
|
|
|
static int got_fifoirq;
|
|
static int got_hcirq;
|
|
|
|
int fpga_interrupt(u32 arg)
|
|
{
|
|
pmc440_fpga_t *fpga = (pmc440_fpga_t *)arg;
|
|
int rc = -1; /* not for us */
|
|
u32 status = FPGA_IN32(&fpga->status);
|
|
|
|
/* check for interrupt from fifo module */
|
|
if (status & STATUS_FIFO_ISF) {
|
|
/* disable this int source */
|
|
FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
|
|
rc = 0;
|
|
got_fifoirq = 1; /* trigger backend */
|
|
}
|
|
|
|
if (status & STATUS_HOST_ISF) {
|
|
FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);
|
|
rc = 0;
|
|
got_hcirq = 1;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
|
|
|
|
got_hcirq = 0;
|
|
|
|
FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
|
|
FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);
|
|
|
|
irq_install_handler(IRQ0_FPGA,
|
|
(interrupt_handler_t *)fpga_interrupt,
|
|
fpga);
|
|
|
|
FPGA_SETBITS(&fpga->ctrla, CTRL_HOST_IE);
|
|
|
|
while (!got_hcirq) {
|
|
/* Abort if ctrl-c was pressed */
|
|
if (ctrlc()) {
|
|
puts("\nAbort\n");
|
|
break;
|
|
}
|
|
}
|
|
if (got_hcirq)
|
|
printf("Got interrupt!\n");
|
|
|
|
FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
|
|
irq_free_handler(IRQ0_FPGA);
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
waithci, 1, 1, do_waithci,
|
|
"Wait for host control interrupt",
|
|
""
|
|
);
|
|
|
|
void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
|
|
{
|
|
u32 ctrl;
|
|
|
|
while (!((ctrl = FPGA_IN32(&fpga->fifo[f].ctrl)) & FIFO_EMPTY)) {
|
|
printf("%5d %d %3d %08x",
|
|
(*n)++, f, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL),
|
|
FPGA_IN32(&fpga->fifo[f].data));
|
|
if (ctrl & FIFO_OVERFLOW) {
|
|
printf(" OVERFLOW\n");
|
|
FPGA_CLRBITS(&fpga->fifo[f].ctrl, FIFO_OVERFLOW);
|
|
} else
|
|
printf("\n");
|
|
}
|
|
}
|
|
|
|
int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
|
|
int i;
|
|
int n = 0;
|
|
u32 ctrl, data, f;
|
|
char str[] = "\\|/-";
|
|
int abort = 0;
|
|
int count = 0;
|
|
int count2 = 0;
|
|
|
|
switch (argc) {
|
|
case 1:
|
|
/* print all fifos status information */
|
|
printf("fifo level status\n");
|
|
printf("______________________________\n");
|
|
for (i=0; i<FIFO_COUNT; i++) {
|
|
ctrl = FPGA_IN32(&fpga->fifo[i].ctrl);
|
|
printf(" %d %3d %s%s%s %s\n",
|
|
i, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL),
|
|
ctrl & FIFO_FULL ? "FULL " : "",
|
|
ctrl & FIFO_EMPTY ? "EMPTY " : "",
|
|
ctrl & (FIFO_FULL|FIFO_EMPTY) ? "" : "NOT EMPTY",
|
|
ctrl & FIFO_OVERFLOW ? "OVERFLOW" : "");
|
|
}
|
|
break;
|
|
|
|
case 2:
|
|
/* completely read out fifo 'n' */
|
|
if (!strcmp(argv[1],"read")) {
|
|
printf(" # fifo level data\n");
|
|
printf("______________________________\n");
|
|
|
|
for (i=0; i<FIFO_COUNT; i++)
|
|
dump_fifo(fpga, i, &n);
|
|
|
|
} else if (!strcmp(argv[1],"wait")) {
|
|
got_fifoirq = 0;
|
|
|
|
irq_install_handler(IRQ0_FPGA,
|
|
(interrupt_handler_t *)fpga_interrupt,
|
|
fpga);
|
|
|
|
printf(" # fifo level data\n");
|
|
printf("______________________________\n");
|
|
|
|
/* enable all fifo interrupts */
|
|
FPGA_OUT32(&fpga->hostctrl,
|
|
HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG);
|
|
for (i=0; i<FIFO_COUNT; i++) {
|
|
/* enable interrupts from all fifos */
|
|
FPGA_SETBITS(&fpga->fifo[i].ctrl, FIFO_IE);
|
|
}
|
|
|
|
while (1) {
|
|
/* wait loop */
|
|
while (!got_fifoirq) {
|
|
count++;
|
|
if (!(count % 100)) {
|
|
count2++;
|
|
putc(0x08); /* backspace */
|
|
putc(str[count2 % 4]);
|
|
}
|
|
|
|
/* Abort if ctrl-c was pressed */
|
|
if ((abort = ctrlc())) {
|
|
puts("\nAbort\n");
|
|
break;
|
|
}
|
|
udelay(1000);
|
|
}
|
|
if (abort)
|
|
break;
|
|
|
|
/* simple fifo backend */
|
|
if (got_fifoirq) {
|
|
for (i=0; i<FIFO_COUNT; i++)
|
|
dump_fifo(fpga, i, &n);
|
|
|
|
got_fifoirq = 0;
|
|
/* unmask global fifo irq */
|
|
FPGA_OUT32(&fpga->hostctrl,
|
|
HOSTCTRL_FIFOIE_GATE |
|
|
HOSTCTRL_FIFOIE_FLAG);
|
|
}
|
|
}
|
|
|
|
/* disable all fifo interrupts */
|
|
FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
|
|
for (i=0; i<FIFO_COUNT; i++)
|
|
FPGA_CLRBITS(&fpga->fifo[i].ctrl, FIFO_IE);
|
|
|
|
irq_free_handler(IRQ0_FPGA);
|
|
|
|
} else {
|
|
printf("Usage:\nfifo %s\n", cmdtp->help);
|
|
return 1;
|
|
}
|
|
break;
|
|
|
|
case 4:
|
|
case 5:
|
|
if (!strcmp(argv[1],"write")) {
|
|
/* get fifo number or fifo address */
|
|
f = simple_strtoul(argv[2], NULL, 16);
|
|
|
|
/* data paramter */
|
|
data = simple_strtoul(argv[3], NULL, 16);
|
|
|
|
/* get optional count parameter */
|
|
n = 1;
|
|
if (argc >= 5)
|
|
n = (int)simple_strtoul(argv[4], NULL, 10);
|
|
|
|
if (f < FIFO_COUNT) {
|
|
printf("writing %d x %08x to fifo %d\n",
|
|
n, data, f);
|
|
for (i=0; i<n; i++)
|
|
FPGA_OUT32(&fpga->fifo[f].data, data);
|
|
} else {
|
|
printf("writing %d x %08x to fifo port at "
|
|
"address %08x\n",
|
|
n, data, f);
|
|
for (i=0; i<n; i++)
|
|
out_be32((void *)f, data);
|
|
}
|
|
} else {
|
|
printf("Usage:\nfifo %s\n", cmdtp->help);
|
|
return 1;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
printf("Usage:\nfifo %s\n", cmdtp->help);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
fifo, 5, 1, do_fifo,
|
|
"Fifo module operations",
|
|
"wait\nfifo read\n"
|
|
"fifo write fifo(0..3) data [cnt=1]\n"
|
|
"fifo write address(>=4) data [cnt=1]\n"
|
|
" - without arguments: print all fifo's status\n"
|
|
" - with 'wait' argument: interrupt driven read from all fifos\n"
|
|
" - with 'read' argument: read current contents from all fifos\n"
|
|
" - with 'write' argument: write 'data' 'cnt' times to "
|
|
"'fifo' or 'address'"
|
|
);
|
|
|
|
int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
ulong sdsdp[5];
|
|
ulong delay;
|
|
int count=16;
|
|
|
|
if (argc < 2) {
|
|
printf("Usage:\nsbe %s\n", cmdtp->help);
|
|
return -1;
|
|
}
|
|
|
|
if (argc > 1) {
|
|
if (!strcmp(argv[1], "400")) {
|
|
/* PLB=133MHz, PLB/PCI=3 */
|
|
printf("Bootstrapping for 400MHz\n");
|
|
sdsdp[0]=0x8678624e;
|
|
sdsdp[1]=0x095fa030;
|
|
sdsdp[2]=0x40082350;
|
|
sdsdp[3]=0x0d050000;
|
|
} else if (!strcmp(argv[1], "533")) {
|
|
/* PLB=133MHz, PLB/PCI=3 */
|
|
printf("Bootstrapping for 533MHz\n");
|
|
sdsdp[0]=0x87788252;
|
|
sdsdp[1]=0x095fa030;
|
|
sdsdp[2]=0x40082350;
|
|
sdsdp[3]=0x0d050000;
|
|
} else if (!strcmp(argv[1], "667")) {
|
|
/* PLB=133MHz, PLB/PCI=3 */
|
|
printf("Bootstrapping for 667MHz\n");
|
|
sdsdp[0]=0x8778a256;
|
|
sdsdp[1]=0x095fa030;
|
|
sdsdp[2]=0x40082350;
|
|
sdsdp[3]=0x0d050000;
|
|
} else {
|
|
printf("Usage:\nsbe %s\n", cmdtp->help);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
if (argc > 2) {
|
|
sdsdp[4] = 0;
|
|
if (argv[2][0]=='1')
|
|
sdsdp[4]=0x19750100;
|
|
else if (argv[2][0]=='0')
|
|
sdsdp[4]=0x19750000;
|
|
if (sdsdp[4])
|
|
count += 4;
|
|
}
|
|
|
|
if (argc > 3) {
|
|
delay = simple_strtoul(argv[3], NULL, 10);
|
|
if (delay > 20)
|
|
delay = 20;
|
|
sdsdp[4] |= delay;
|
|
}
|
|
|
|
printf("Writing boot EEPROM ...\n");
|
|
if (bootstrap_eeprom_write(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
|
|
0, (uchar*)sdsdp, count) != 0)
|
|
printf("bootstrap_eeprom_write failed\n");
|
|
else
|
|
printf("done (dump via 'i2c md 52 0.1 14')\n");
|
|
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
sbe, 4, 0, do_setup_bootstrap_eeprom,
|
|
"setup bootstrap eeprom",
|
|
"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
|
|
);
|
|
|
|
#if defined(CONFIG_PRAM)
|
|
#include <environment.h>
|
|
#include <search.h>
|
|
#include <errno.h>
|
|
|
|
int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
u32 pram, nextbase, base;
|
|
char *v;
|
|
u32 param;
|
|
ulong *lptr;
|
|
|
|
env_t *envp;
|
|
char *res;
|
|
int len;
|
|
|
|
v = getenv("pram");
|
|
if (v)
|
|
pram = simple_strtoul(v, NULL, 10);
|
|
else {
|
|
printf("Error: pram undefined. Please define pram in KiB\n");
|
|
return 1;
|
|
}
|
|
|
|
base = (u32)gd->ram_size;
|
|
#if defined(CONFIG_LOGBUFFER)
|
|
base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD;
|
|
#endif
|
|
/*
|
|
* gd->ram_size == physical ram size - CONFIG_SYS_MEM_TOP_HIDE
|
|
*/
|
|
param = base - (pram << 10);
|
|
printf("PARAM: @%08x\n", param);
|
|
debug("memsize=0x%08x, base=0x%08x\n", (u32)gd->ram_size, base);
|
|
|
|
/* clear entire PA ram */
|
|
memset((void*)param, 0, (pram << 10));
|
|
|
|
/* reserve 4k for pointer field */
|
|
nextbase = base - 4096;
|
|
lptr = (ulong*)(base);
|
|
|
|
/*
|
|
* *(--lptr) = item_size;
|
|
* *(--lptr) = base - item_base = distance from field top;
|
|
*/
|
|
|
|
/* env is first (4k aligned) */
|
|
nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1));
|
|
envp = (env_t *)nextbase;
|
|
res = (char *)envp->data;
|
|
len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL);
|
|
if (len < 0) {
|
|
error("Cannot export environment: errno = %d\n", errno);
|
|
return 1;
|
|
}
|
|
envp->crc = crc32(0, envp->data, ENV_SIZE);
|
|
|
|
*(--lptr) = CONFIG_ENV_SIZE; /* size */
|
|
*(--lptr) = base - nextbase; /* offset | type=0 */
|
|
|
|
/* free section */
|
|
*(--lptr) = nextbase - param; /* size */
|
|
*(--lptr) = (base - param) | 126; /* offset | type=126 */
|
|
|
|
/* terminate pointer field */
|
|
*(--lptr) = crc32(0, (void*)(base - 0x10), 0x10);
|
|
*(--lptr) = 0; /* offset=0 -> terminator */
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
painit, 1, 1, do_painit,
|
|
"prepare PciAccess system",
|
|
""
|
|
);
|
|
#endif /* CONFIG_PRAM */
|
|
|
|
int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
in_be32((void*)CONFIG_SYS_RESET_BASE);
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
selfreset, 1, 1, do_selfreset,
|
|
"assert self-reset# signal",
|
|
""
|
|
);
|
|
|
|
int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
|
|
|
|
/* requiers bootet FPGA and PLD_IOEN_N active */
|
|
if (in_be32((void*)GPIO1_OR) & GPIO1_IOEN_N) {
|
|
printf("Error: resetout requires a bootet FPGA\n");
|
|
return -1;
|
|
}
|
|
|
|
if (argc > 1) {
|
|
if (argv[1][0] == '0') {
|
|
/* assert */
|
|
printf("PMC-RESETOUT# asserted\n");
|
|
FPGA_OUT32(&fpga->hostctrl,
|
|
HOSTCTRL_PMCRSTOUT_GATE);
|
|
} else {
|
|
/* deassert */
|
|
printf("PMC-RESETOUT# deasserted\n");
|
|
FPGA_OUT32(&fpga->hostctrl,
|
|
HOSTCTRL_PMCRSTOUT_GATE |
|
|
HOSTCTRL_PMCRSTOUT_FLAG);
|
|
}
|
|
} else {
|
|
printf("PMC-RESETOUT# is %s\n",
|
|
FPGA_IN32(&fpga->hostctrl) & HOSTCTRL_PMCRSTOUT_FLAG ?
|
|
"inactive" : "active");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
resetout, 2, 1, do_resetout,
|
|
"assert PMC-RESETOUT# signal",
|
|
""
|
|
);
|
|
|
|
int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
if (is_monarch()) {
|
|
printf("This command is only supported in non-monarch mode\n");
|
|
return -1;
|
|
}
|
|
|
|
if (argc > 1) {
|
|
if (argv[1][0] == '0') {
|
|
/* assert */
|
|
printf("inta# asserted\n");
|
|
out_be32((void*)GPIO1_TCR,
|
|
in_be32((void*)GPIO1_TCR) | GPIO1_INTA_FAKE);
|
|
} else {
|
|
/* deassert */
|
|
printf("inta# deasserted\n");
|
|
out_be32((void*)GPIO1_TCR,
|
|
in_be32((void*)GPIO1_TCR) & ~GPIO1_INTA_FAKE);
|
|
}
|
|
} else {
|
|
printf("inta# is %s\n",
|
|
in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ?
|
|
"active" : "inactive");
|
|
}
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
inta, 2, 1, do_inta,
|
|
"Assert/Deassert or query INTA# state in non-monarch mode",
|
|
""
|
|
);
|
|
|
|
/* test-only */
|
|
int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
ulong pciaddr;
|
|
|
|
if (argc > 1) {
|
|
pciaddr = simple_strtoul(argv[1], NULL, 16);
|
|
|
|
pciaddr &= 0xf0000000;
|
|
|
|
/* map PCI address at 0xc0000000 in PLB space */
|
|
|
|
/* PMM1 Mask/Attribute - disabled b4 setting */
|
|
out32r(PCIL0_PMM1MA, 0x00000000);
|
|
/* PMM1 Local Address */
|
|
out32r(PCIL0_PMM1LA, 0xc0000000);
|
|
/* PMM1 PCI Low Address */
|
|
out32r(PCIL0_PMM1PCILA, pciaddr);
|
|
/* PMM1 PCI High Address */
|
|
out32r(PCIL0_PMM1PCIHA, 0x00000000);
|
|
/* 256MB + No prefetching, and enable region */
|
|
out32r(PCIL0_PMM1MA, 0xf0000001);
|
|
} else {
|
|
printf("Usage:\npmm %s\n", cmdtp->help);
|
|
}
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
pmm, 2, 1, do_pmm,
|
|
"Setup pmm[1] registers",
|
|
"<pciaddr> (pciaddr will be aligned to 256MB)"
|
|
);
|
|
|
|
#if defined(CONFIG_SYS_EEPROM_WREN)
|
|
int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int query = argc == 1;
|
|
int state = 0;
|
|
|
|
if (query) {
|
|
/* Query write access state. */
|
|
state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
|
|
if (state < 0) {
|
|
puts("Query of write access state failed.\n");
|
|
} else {
|
|
printf("Write access for device 0x%0x is %sabled.\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
|
|
state = 0;
|
|
}
|
|
} else {
|
|
if ('0' == argv[1][0]) {
|
|
/* Disable write access. */
|
|
state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 0);
|
|
} else {
|
|
/* Enable write access. */
|
|
state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 1);
|
|
}
|
|
if (state < 0) {
|
|
puts("Setup of write access state failed.\n");
|
|
}
|
|
}
|
|
|
|
return state;
|
|
}
|
|
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
|
|
"Enable / disable / query EEPROM write access",
|
|
""
|
|
);
|
|
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
|
|
|
|
#endif /* CONFIG_CMD_BSP */
|