mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
50e0d5e60b
Explicitly turn off unused voltages, rather then leaving them as is. Likewise explictly enabled the dcdc convertors, rather then assuming they are already enabled at boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
65 lines
2 KiB
Text
65 lines
2 KiB
Text
config AXP221_POWER
|
|
boolean "axp221 / axp223 pmic support"
|
|
depends on MACH_SUN6I || MACH_SUN8I
|
|
default y
|
|
---help---
|
|
Say y here to enable support for the axp221 / axp223 pmic found on most
|
|
sun6i (A31) / sun8i (A23) boards.
|
|
|
|
config AXP221_DCDC1_VOLT
|
|
int "axp221 dcdc1 voltage"
|
|
depends on AXP221_POWER
|
|
default 3000
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 dcdc1 at, set to 0 to
|
|
disable dcdc1. This is typically used as generic 3.3V IO voltage for
|
|
things like GPIO-s, sdcard interfaces, etc. On most boards this is
|
|
undervolted to 3.0V to safe battery.
|
|
|
|
config AXP221_DLDO1_VOLT
|
|
int "axp221 dldo1 voltage"
|
|
depends on AXP221_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 dldo1 at, set to 0 to
|
|
disable dldo1. On sun6i (A31) boards with ethernet this is often used
|
|
to power the ethernet phy. On sun8i (A23) boards this is often used to
|
|
power the wifi.
|
|
|
|
config AXP221_DLDO4_VOLT
|
|
int "axp221 dldo4 voltage"
|
|
depends on AXP221_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 dldo4 at, set to 0 to
|
|
disable dldo4.
|
|
|
|
config AXP221_ALDO1_VOLT
|
|
int "axp221 aldo1 voltage"
|
|
depends on AXP221_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 aldo1 at, set to 0 to
|
|
disable aldo1. On sun6i (A31) boards which have a wifi module this is
|
|
often used to power the wifi module.
|
|
|
|
config AXP221_ALDO2_VOLT
|
|
int "axp221 aldo2 voltage"
|
|
depends on AXP221_POWER
|
|
default 1800 if MACH_SUN6I
|
|
default 2500 if MACH_SUN8I
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 aldo2 at, set to 0 to
|
|
disable aldo2. On sun6i (A31) boards this is typically connected to
|
|
VCC-PM, which powers the port M gpios, and should be set to 1.8V.
|
|
On sun8i (A23) this is typically connected to VDD-DLL and must be
|
|
set to 2.5V.
|
|
|
|
config AXP221_ALDO3_VOLT
|
|
int "axp221 aldo3 voltage"
|
|
depends on AXP221_POWER
|
|
default 3000
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 aldo3 at, set to 0 to
|
|
disable aldo3. This is typically connected to VCC-PLL and AVCC and
|
|
must be set to 3V.
|