mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-20 22:52:00 +00:00
30915ab95d
The BATs (block address translation registers) determine the initial memory window mappings. Hence, they must be known at compile time and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
96 lines
2.5 KiB
Text
96 lines
2.5 KiB
Text
CONFIG_PPC=y
|
|
CONFIG_SYS_TEXT_BASE=0x00100000
|
|
CONFIG_SPL_SERIAL_SUPPORT=y
|
|
CONFIG_SPL=y
|
|
CONFIG_SYS_CLK_FREQ=33333333
|
|
CONFIG_MPC83xx=y
|
|
CONFIG_HIGH_BATS=y
|
|
CONFIG_TARGET_MPC8313ERDB_NAND=y
|
|
CONFIG_SYSTEM_PLL_FACTOR_5_1=y
|
|
CONFIG_CORE_PLL_RATIO_2_1=y
|
|
CONFIG_PCI_HOST_MODE_ENABLE=y
|
|
CONFIG_PCI_INT_ARBITER1_ENABLE=y
|
|
CONFIG_BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL=y
|
|
CONFIG_TSEC1_MODE_RGMII=y
|
|
CONFIG_TSEC2_MODE_RGMII=y
|
|
CONFIG_BAT0=y
|
|
CONFIG_BAT0_NAME="DDR"
|
|
CONFIG_BAT0_BASE=0x00000000
|
|
CONFIG_BAT0_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT0_ACCESS_RW=y
|
|
CONFIG_BAT0_USER_MODE_VALID=y
|
|
CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_BAT1=y
|
|
CONFIG_BAT1_NAME="PCI1_MEM"
|
|
CONFIG_BAT1_BASE=0x80000000
|
|
CONFIG_BAT1_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT1_ACCESS_RW=y
|
|
CONFIG_BAT1_USER_MODE_VALID=y
|
|
CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_BAT2=y
|
|
CONFIG_BAT2_NAME="PCI1_MMIO_BASE"
|
|
CONFIG_BAT2_BASE=0x90000000
|
|
CONFIG_BAT2_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT2_ACCESS_RW=y
|
|
CONFIG_BAT2_ICACHE_INHIBITED=y
|
|
CONFIG_BAT2_ICACHE_GUARDED=y
|
|
CONFIG_BAT2_DCACHE_INHIBITED=y
|
|
CONFIG_BAT2_DCACHE_GUARDED=y
|
|
CONFIG_BAT2_USER_MODE_VALID=y
|
|
CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_BAT5=y
|
|
CONFIG_BAT5_NAME="IMMR"
|
|
CONFIG_BAT5_BASE=0xE0000000
|
|
CONFIG_BAT5_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT5_ACCESS_RW=y
|
|
CONFIG_BAT5_ICACHE_INHIBITED=y
|
|
CONFIG_BAT5_ICACHE_GUARDED=y
|
|
CONFIG_BAT5_DCACHE_INHIBITED=y
|
|
CONFIG_BAT5_DCACHE_GUARDED=y
|
|
CONFIG_BAT5_USER_MODE_VALID=y
|
|
CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_BAT6=y
|
|
CONFIG_BAT6_NAME="STACK_IN_DCACHE"
|
|
CONFIG_BAT6_BASE=0xF0000000
|
|
CONFIG_BAT6_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT6_ACCESS_RW=y
|
|
CONFIG_BAT6_ICACHE_GUARDED=y
|
|
CONFIG_BAT6_DCACHE_GUARDED=y
|
|
CONFIG_BAT6_USER_MODE_VALID=y
|
|
CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_OF_BOARD_SETUP=y
|
|
CONFIG_OF_STDOUT_VIA_ALIAS=y
|
|
CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ"
|
|
CONFIG_BOOTDELAY=6
|
|
CONFIG_MISC_INIT_R=y
|
|
CONFIG_BOARD_EARLY_INIT_R=y
|
|
# CONFIG_SPL_FRAMEWORK is not set
|
|
CONFIG_SPL_TEXT_BASE=0xFFF00000
|
|
CONFIG_SPL_NAND_SUPPORT=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_IMLS=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_NAND=y
|
|
CONFIG_CMD_PCI=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_DATE=y
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_MTDIDS_DEFAULT="nand0=e2800000.flash"
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=e2800000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)"
|
|
# CONFIG_ENV_IS_IN_FLASH is not set
|
|
CONFIG_ENV_IS_IN_NAND=y
|
|
# CONFIG_MMC is not set
|
|
CONFIG_MTD_NOR_FLASH=y
|
|
CONFIG_FLASH_CFI_DRIVER=y
|
|
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
|
|
CONFIG_SYS_FLASH_PROTECTION=y
|
|
CONFIG_SYS_FLASH_CFI=y
|
|
CONFIG_NAND=y
|
|
CONFIG_PHY_MARVELL=y
|
|
CONFIG_TSEC_ENET=y
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_OF_LIBFDT=y
|