mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
65cc0e2a65
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
313 lines
8.6 KiB
C
313 lines
8.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* SoC-specific lowlevel code for DA850
|
|
*
|
|
* Copyright (C) 2011
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*/
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <nand.h>
|
|
#include <ns16550.h>
|
|
#include <post.h>
|
|
#include <asm/arch/da850_lowlevel.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/davinci_misc.h>
|
|
#include <asm/arch/ddr2_defs.h>
|
|
#include <asm/ti-common/davinci_nand.h>
|
|
#include <asm/arch/pll_defs.h>
|
|
|
|
void davinci_enable_uart0(void)
|
|
{
|
|
lpsc_on(DAVINCI_LPSC_UART0);
|
|
|
|
/* Bringup UART0 out of reset */
|
|
REG(UART0_PWREMU_MGMT) = 0x00006001;
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_DA850_PLL_INIT)
|
|
static void da850_waitloop(unsigned long loopcnt)
|
|
{
|
|
unsigned long i;
|
|
|
|
for (i = 0; i < loopcnt; i++)
|
|
asm(" NOP");
|
|
}
|
|
|
|
static int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
|
|
{
|
|
if (reg == davinci_pllc0_regs)
|
|
/* Unlock PLL registers. */
|
|
clrbits_le32(&davinci_syscfg_regs->cfgchip0, PLL_MASTER_LOCK);
|
|
|
|
/*
|
|
* Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
|
|
* through MMR
|
|
*/
|
|
clrbits_le32(®->pllctl, PLLCTL_PLLENSRC);
|
|
/* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
|
|
clrbits_le32(®->pllctl, PLLCTL_EXTCLKSRC);
|
|
|
|
/* Set PLLEN=0 => PLL BYPASS MODE */
|
|
clrbits_le32(®->pllctl, PLLCTL_PLLEN);
|
|
|
|
da850_waitloop(150);
|
|
|
|
if (reg == davinci_pllc0_regs) {
|
|
/*
|
|
* Select the Clock Mode bit 8 as External Clock or On Chip
|
|
* Oscilator
|
|
*/
|
|
dv_maskbits(®->pllctl, ~PLLCTL_RES_9);
|
|
setbits_le32(®->pllctl,
|
|
(CONFIG_SYS_DV_CLKMODE << PLLCTL_CLOCK_MODE_SHIFT));
|
|
}
|
|
|
|
/* Clear PLLRST bit to reset the PLL */
|
|
clrbits_le32(®->pllctl, PLLCTL_PLLRST);
|
|
|
|
/* Disable the PLL output */
|
|
setbits_le32(®->pllctl, PLLCTL_PLLDIS);
|
|
|
|
/* PLL initialization sequence */
|
|
/*
|
|
* Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
|
|
* power down bit
|
|
*/
|
|
clrbits_le32(®->pllctl, PLLCTL_PLLPWRDN);
|
|
|
|
/* Enable the PLL from Disable Mode PLLDIS bit to 0 */
|
|
clrbits_le32(®->pllctl, PLLCTL_PLLDIS);
|
|
|
|
#if defined(CONFIG_SYS_DA850_PLL0_PREDIV)
|
|
/* program the prediv */
|
|
if (reg == davinci_pllc0_regs && CONFIG_SYS_DA850_PLL0_PREDIV)
|
|
writel((PLL_DIVEN | CONFIG_SYS_DA850_PLL0_PREDIV),
|
|
®->prediv);
|
|
#endif
|
|
|
|
/* Program the required multiplier value in PLLM */
|
|
writel(pllmult, ®->pllm);
|
|
|
|
/* program the postdiv */
|
|
if (reg == davinci_pllc0_regs)
|
|
writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL0_POSTDIV),
|
|
®->postdiv);
|
|
else
|
|
writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL1_POSTDIV),
|
|
®->postdiv);
|
|
|
|
/*
|
|
* Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
|
|
* no GO operation is currently in progress
|
|
*/
|
|
while ((readl(®->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
|
|
;
|
|
|
|
if (reg == davinci_pllc0_regs) {
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV1, ®->plldiv1);
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV2, ®->plldiv2);
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV3, ®->plldiv3);
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV4, ®->plldiv4);
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV5, ®->plldiv5);
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV6, ®->plldiv6);
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV7, ®->plldiv7);
|
|
} else {
|
|
writel(CONFIG_SYS_DA850_PLL1_PLLDIV1, ®->plldiv1);
|
|
writel(CONFIG_SYS_DA850_PLL1_PLLDIV2, ®->plldiv2);
|
|
writel(CONFIG_SYS_DA850_PLL1_PLLDIV3, ®->plldiv3);
|
|
}
|
|
|
|
/*
|
|
* Set the GOSET bit in PLLCMD to 1 to initiate a new divider
|
|
* transition.
|
|
*/
|
|
setbits_le32(®->pllcmd, PLLCMD_GOSTAT);
|
|
|
|
/*
|
|
* Wait for the GOSTAT bit in PLLSTAT to clear to 0
|
|
* (completion of phase alignment).
|
|
*/
|
|
while ((readl(®->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
|
|
;
|
|
|
|
/* Wait for PLL to reset properly. See PLL spec for PLL reset time */
|
|
da850_waitloop(200);
|
|
|
|
/* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
|
|
setbits_le32(®->pllctl, PLLCTL_PLLRST);
|
|
|
|
/* Wait for PLL to lock. See PLL spec for PLL lock time */
|
|
da850_waitloop(2400);
|
|
|
|
/*
|
|
* Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
|
|
* mode
|
|
*/
|
|
setbits_le32(®->pllctl, PLLCTL_PLLEN);
|
|
|
|
|
|
/*
|
|
* clear EMIFA and EMIFB clock source settings, let them
|
|
* run off SYSCLK
|
|
*/
|
|
if (reg == davinci_pllc0_regs)
|
|
dv_maskbits(&davinci_syscfg_regs->cfgchip3,
|
|
~(PLL_SCSCFG3_DIV45PENA | PLL_SCSCFG3_EMA_CLKSRC));
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SYS_DA850_PLL_INIT */
|
|
|
|
#if defined(CONFIG_SYS_DA850_DDR_INIT)
|
|
static int da850_ddr_setup(void)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
/* Enable the Clock to DDR2/mDDR */
|
|
lpsc_on(DAVINCI_LPSC_DDR_EMIF);
|
|
|
|
tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
|
|
if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
|
|
/* Begin VTP Calibration */
|
|
clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
|
|
clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
|
|
clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
|
|
|
|
/* Polling READY bit to see when VTP calibration is done */
|
|
tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
|
|
while ((tmp & VTP_READY) != VTP_READY)
|
|
tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
|
|
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
|
|
}
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
|
|
writel(CFG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
|
|
|
|
if (CFG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) {
|
|
/* DDR2 */
|
|
clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
|
|
(1 << DDR_SLEW_DDR_PDENA_BIT) |
|
|
(1 << DDR_SLEW_CMOSEN_BIT));
|
|
} else {
|
|
/* MOBILE DDR */
|
|
setbits_le32(&davinci_syscfg1_regs->ddr_slew,
|
|
(1 << DDR_SLEW_DDR_PDENA_BIT) |
|
|
(1 << DDR_SLEW_CMOSEN_BIT));
|
|
}
|
|
|
|
/*
|
|
* SDRAM Configuration Register (SDCR):
|
|
* First set the BOOTUNLOCK bit to make configuration bits
|
|
* writeable.
|
|
*/
|
|
setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
|
|
|
|
/*
|
|
* Write the new value of these bits and clear BOOTUNLOCK.
|
|
* At the same time, set the TIMUNLOCK bit to allow changing
|
|
* the timing registers
|
|
*/
|
|
tmp = CFG_SYS_DA850_DDR2_SDBCR;
|
|
tmp &= ~DV_DDR_BOOTUNLOCK;
|
|
tmp |= DV_DDR_TIMUNLOCK;
|
|
writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
|
|
|
|
/* write memory configuration and timing */
|
|
if (!(CFG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) {
|
|
/* MOBILE DDR only*/
|
|
writel(CFG_SYS_DA850_DDR2_SDBCR2,
|
|
&dv_ddr2_regs_ctrl->sdbcr2);
|
|
}
|
|
writel(CFG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
|
|
writel(CFG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
|
|
|
|
/* clear the TIMUNLOCK bit and write the value of the CL field */
|
|
tmp &= ~DV_DDR_TIMUNLOCK;
|
|
writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
|
|
|
|
/*
|
|
* LPMODEN and MCLKSTOPEN must be set!
|
|
* Without this bits set, PSC don;t switch states !!
|
|
*/
|
|
writel(CFG_SYS_DA850_DDR2_SDRCR |
|
|
(1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
|
|
(1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
|
|
&dv_ddr2_regs_ctrl->sdrcr);
|
|
|
|
/* SyncReset the Clock to EMIF3A SDRAM */
|
|
lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
|
|
/* Enable the Clock to EMIF3A SDRAM */
|
|
lpsc_on(DAVINCI_LPSC_DDR_EMIF);
|
|
|
|
/* disable self refresh */
|
|
clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr,
|
|
DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_MCLKSTOPEN);
|
|
writel(CFG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SYS_DA850_DDR_INIT */
|
|
|
|
__attribute__((weak))
|
|
void board_gpio_init(void)
|
|
{
|
|
return;
|
|
}
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
/* Unlock kick registers */
|
|
writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0);
|
|
writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1);
|
|
|
|
dv_maskbits(&davinci_syscfg_regs->suspsrc,
|
|
CFG_SYS_DA850_SYSCFG_SUSPSRC);
|
|
|
|
/* configure pinmux settings */
|
|
if (davinci_configure_pin_mux_items(pinmuxes, pinmuxes_size))
|
|
return 1;
|
|
|
|
#if defined(CONFIG_SYS_DA850_PLL_INIT)
|
|
/* PLL setup */
|
|
da850_pll_init(davinci_pllc0_regs, CFG_SYS_DA850_PLL0_PLLM);
|
|
da850_pll_init(davinci_pllc1_regs, CFG_SYS_DA850_PLL1_PLLM);
|
|
#endif
|
|
/* setup CSn config */
|
|
#if defined(CONFIG_SYS_DA850_CS2CFG)
|
|
writel(CONFIG_SYS_DA850_CS2CFG, &davinci_emif_regs->ab1cr);
|
|
#endif
|
|
#if defined(CONFIG_SYS_DA850_CS3CFG)
|
|
writel(CONFIG_SYS_DA850_CS3CFG, &davinci_emif_regs->ab2cr);
|
|
#endif
|
|
|
|
da8xx_configure_lpsc_items(lpsc, lpsc_size);
|
|
|
|
/* GPIO setup */
|
|
board_gpio_init();
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_SERIAL)
|
|
ns16550_init((struct ns16550 *)(CFG_SYS_NS16550_COM1),
|
|
CFG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
|
|
#endif
|
|
/*
|
|
* Fix Power and Emulation Management Register
|
|
* see sprufw3a.pdf page 37 Table 24
|
|
*/
|
|
writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
|
|
DAVINCI_UART_PWREMU_MGMT_UTRST),
|
|
#if (CFG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE)
|
|
&davinci_uart0_ctrl_regs->pwremu_mgmt);
|
|
#else
|
|
&davinci_uart2_ctrl_regs->pwremu_mgmt);
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_DA850_DDR_INIT)
|
|
da850_ddr_setup();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|