mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
90526e9fba
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
||
|---|---|---|
| .. | ||
| board.c | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
How to use U-Boot on Grinn's chiliBoard -------------------------------------- - Build U-Boot for chiliBoard: $ make mrproper $ make chiliboard_defconfig $ make This will generate the SPL image called MLO and the u-boot.img. - Flash the SPL image into the micro SD card: sudo dd if=MLO of=/dev/mmcblk0 bs=128k; sync - Flash the u-boot.img image into the micro SD card: sudo dd if=u-boot.img of=/dev/mmcblk0 bs=128k seek=3; sync - Jumper settings: S2: 1 1 1 0 1 0 where 0 means bottom position and 1 means top position (from the switch label numbers reference). - Insert the micro SD card in the board. - Connect USB cable between chiliBoard and the PC for the power and console. - U-Boot messages should come up.