u-boot/board/imgtec/ci20
Daniel Schwierzeck e9dcd5b402 MIPS: remove CONFIG_SYS_MHZ
Resolve all uses of CONFIG_SYS_MHZ with the currently defined value.
Remove code which depends on CONFIG_SYS_MHZ but where no board configs
actually use that code.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-11-02 21:42:32 +01:00
..
ci20.c MIPS: remove CONFIG_SYS_MHZ 2022-11-02 21:42:32 +01:00
Kconfig Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE 2022-10-31 11:01:31 -04:00
MAINTAINERS mips: jz47xx: Add Creator CI20 platform 2018-12-19 15:23:02 +01:00
Makefile mips: jz47xx: Add Creator CI20 platform 2018-12-19 15:23:02 +01:00
README mips: jz47xx: Add Creator CI20 platform 2018-12-19 15:23:02 +01:00

CI20 U-Boot

Installation to an SD card:
  Repartition your card with an MBR such that the first partition starts at an
  offset of no less than 270KB. Then install U-Boot SPL & the full U-Boot image
  to the card like so:

    dd if=spl/u-boot-spl.bin of=/dev/sdX obs=512 seek=1
    dd if=u-boot-dtb.img of=/dev/sdX obs=1K seek=14
    sync