u-boot/arch/arm/dts/imxrt1050.dtsi
Marcel Ziswiler 62f96866d3 imxrt1050: synchronise device tree with linux
Synchronise device tree with linux v6.1-rc3.

Note: Nowadays, the intent is for them regular device trees to just be
synchronised from them Linux kernel device trees and any and all U-Boot
specific changes need to go into the -u-boot.dtsi device tree include
files which BTW get included automatically by the U-Boot build system.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-11-08 17:35:00 +01:00

160 lines
3.9 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2019
* Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
*/
#include "armv7-m.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/imxrt1050-clock.h>
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
clocks {
osc: osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
osc3M: osc3M {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <3000000>;
};
};
soc {
lpuart1: serial@40184000 {
compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x40184000 0x4000>;
interrupts = <20>;
clocks = <&clks IMXRT1050_CLK_LPUART1>;
clock-names = "ipg";
status = "disabled";
};
iomuxc: pinctrl@401f8000 {
compatible = "fsl,imxrt1050-iomuxc";
reg = <0x401f8000 0x4000>;
fsl,mux_mask = <0x7>;
};
anatop: anatop@400d8000 {
compatible = "fsl,imxrt-anatop";
reg = <0x400d8000 0x4000>;
};
clks: clock-controller@400fc000 {
compatible = "fsl,imxrt1050-ccm";
reg = <0x400fc000 0x4000>;
interrupts = <95>, <96>;
clocks = <&osc>;
clock-names = "osc";
#clock-cells = <1>;
assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
<&clks IMXRT1050_CLK_PLL1_BYPASS>,
<&clks IMXRT1050_CLK_PLL2_BYPASS>,
<&clks IMXRT1050_CLK_PLL3_BYPASS>,
<&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
<&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
<&clks IMXRT1050_CLK_PLL1_ARM>,
<&clks IMXRT1050_CLK_PLL2_SYS>,
<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
<&clks IMXRT1050_CLK_PLL2_SYS>;
};
edma1: dma-controller@400e8000 {
#dma-cells = <2>;
compatible = "fsl,imx7ulp-edma";
reg = <0x400e8000 0x4000>,
<0x400ec000 0x4000>;
dma-channels = <32>;
interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
<9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
clock-names = "dma", "dmamux0";
clocks = <&clks IMXRT1050_CLK_DMA>,
<&clks IMXRT1050_CLK_DMA_MUX>;
};
usdhc1: mmc@402c0000 {
compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
reg = <0x402c0000 0x4000>;
interrupts = <110>;
clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
<&clks IMXRT1050_CLK_OSC>,
<&clks IMXRT1050_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,wp-controller;
no-1-8-v;
max-frequency = <4000000>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step = <2>;
status = "disabled";
};
gpio1: gpio@401b8000 {
compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
reg = <0x401b8000 0x4000>;
interrupts = <80>, <81>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@401bc000 {
compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
reg = <0x401bc000 0x4000>;
interrupts = <82>, <83>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@401c0000 {
compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
reg = <0x401c0000 0x4000>;
interrupts = <84>, <85>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@401c4000 {
compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
reg = <0x401c4000 0x4000>;
interrupts = <86>, <87>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio5: gpio@400c0000 {
compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
reg = <0x400c0000 0x4000>;
interrupts = <88>, <89>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpt: timer@401ec000 {
compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
reg = <0x401ec000 0x4000>;
interrupts = <100>;
clocks = <&osc3M>;
clock-names = "per";
};
};
};