mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 23:47:24 +00:00
e391b1e64b
Since Binutils 1a9ccd70f9a7[1] u-boot will not link targets that set CONFIG_SYS_TEXT_BASE=0 with the following error: LD u-boot arm-linux-gnueabi-ld.bfd: u-boot: Not enough room for program headers, try linking with -N arm-linux-gnueabi-ld.bfd: final link failed: Bad value The issue can be reproduced with the bad binutils and the rock2_defconfig target. This issue was also encountered by the powerpc kernel[2], with the fix being to pass --no-dynamic-linker for linkers newer than 2.26 when this flag was introduced. The option tells ld that the PIE or shared lib does not need loaded program headers. Ubuntu Zesty's Binutils 2.27.51.20161202 hits this error. [1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=1a9ccd70f9a7 [2] https://git.kernel.org/cgit/linux/kernel/git/powerpc/linux.git/commit/?h=next&id=ff45000fcb56b5b0f1a14a865d3541746d838a0a Signed-off-by: Joel Stanley <joel@jms.id.au> [AF: Apply to LDFLAGS_$(SPL_BIN) as well, suggested by Tom Rini] Signed-off-by: Andreas Färber <afaerber@suse.de>
364 lines
11 KiB
Makefile
364 lines
11 KiB
Makefile
#
|
|
# (C) Copyright 2000-2011
|
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
#
|
|
# (C) Copyright 2011
|
|
# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com.
|
|
#
|
|
# (C) Copyright 2011
|
|
# Texas Instruments Incorporated - http://www.ti.com/
|
|
# Aneesh V <aneesh@ti.com>
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# Based on top-level Makefile.
|
|
#
|
|
|
|
src := $(obj)
|
|
|
|
# Create output directory if not already present
|
|
_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
|
|
|
|
include $(srctree)/scripts/Kbuild.include
|
|
|
|
-include include/config/auto.conf
|
|
-include $(obj)/include/autoconf.mk
|
|
|
|
KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
|
|
ifeq ($(CONFIG_TPL_BUILD),y)
|
|
KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
|
|
endif
|
|
|
|
ifeq ($(CONFIG_TPL_BUILD),y)
|
|
SPL_BIN := u-boot-tpl
|
|
else
|
|
SPL_BIN := u-boot-spl
|
|
endif
|
|
|
|
ifdef CONFIG_SPL_BUILD
|
|
SPL_ := SPL_
|
|
ifeq ($(CONFIG_TPL_BUILD),y)
|
|
SPL_TPL_ := TPL_
|
|
else
|
|
SPL_TPL_ := SPL_
|
|
endif
|
|
else
|
|
SPL_ :=
|
|
SPL_TPL_ :=
|
|
endif
|
|
|
|
include $(srctree)/config.mk
|
|
include $(srctree)/arch/$(ARCH)/Makefile
|
|
|
|
# Enable garbage collection of un-used sections for SPL
|
|
KBUILD_CFLAGS += -ffunction-sections -fdata-sections
|
|
LDFLAGS_FINAL += --gc-sections
|
|
|
|
# FIX ME
|
|
cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
|
|
$(NOSTDINC_FLAGS)
|
|
c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
|
|
|
|
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
|
|
|
|
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
|
|
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
|
|
|
|
libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
|
|
libs-y += common/init/
|
|
|
|
# Special handling for a few options which support SPL/TPL
|
|
ifeq ($(CONFIG_TPL_BUILD),y)
|
|
libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/
|
|
libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/
|
|
else
|
|
libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/
|
|
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
|
|
endif
|
|
|
|
libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
|
|
libs-y += drivers/
|
|
libs-$(CONFIG_SPL_USB_GADGET_SUPPORT) += drivers/usb/dwc3/
|
|
libs-y += dts/
|
|
libs-y += fs/
|
|
libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
|
|
libs-$(CONFIG_SPL_NET_SUPPORT) += net/
|
|
|
|
head-y := $(addprefix $(obj)/,$(head-y))
|
|
libs-y := $(addprefix $(obj)/,$(libs-y))
|
|
u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y)))
|
|
|
|
libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
|
|
|
|
# Add GCC lib
|
|
ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
|
|
PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
|
|
PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
|
|
endif
|
|
|
|
u-boot-spl-init := $(head-y)
|
|
u-boot-spl-main := $(libs-y)
|
|
ifdef CONFIG_SPL_OF_PLATDATA
|
|
u-boot-spl-platdata := $(obj)/dts/dt-platdata.o
|
|
endif
|
|
|
|
# Linker Script
|
|
ifdef CONFIG_SPL_LDSCRIPT
|
|
# need to strip off double quotes
|
|
LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
|
|
endif
|
|
|
|
ifeq ($(wildcard $(LDSCRIPT)),)
|
|
LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
|
|
endif
|
|
ifeq ($(wildcard $(LDSCRIPT)),)
|
|
LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
|
|
endif
|
|
ifeq ($(wildcard $(LDSCRIPT)),)
|
|
LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
|
|
endif
|
|
ifeq ($(wildcard $(LDSCRIPT)),)
|
|
$(error could not find linker script)
|
|
endif
|
|
|
|
# Special flags for CPP when processing the linker script.
|
|
# Pass the version down so we can handle backwards compatibility
|
|
# on the fly.
|
|
LDPPFLAGS += \
|
|
-include $(srctree)/include/u-boot/u-boot.lds.h \
|
|
-include $(objtree)/include/config.h \
|
|
-DCPUDIR=$(CPUDIR) \
|
|
$(shell $(LD) --version | \
|
|
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
|
|
|
|
MKIMAGEOUTPUT ?= /dev/null
|
|
|
|
quiet_cmd_mkimage = MKIMAGE $@
|
|
cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
|
|
$(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT))
|
|
|
|
MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
|
|
|
|
MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
|
|
|
|
MLO MLO.byteswap: $(obj)/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkimage)
|
|
|
|
ifeq ($(CONFIG_SYS_SOC),"at91")
|
|
MKIMAGEFLAGS_boot.bin = -T atmelimage
|
|
|
|
ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
|
|
MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
|
|
|
|
boot.bin: $(obj)/../tools/atmel_pmecc_params
|
|
endif
|
|
|
|
boot.bin: $(obj)/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkimage)
|
|
else
|
|
ifdef CONFIG_ARCH_ZYNQ
|
|
MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
|
|
endif
|
|
ifdef CONFIG_ARCH_ZYNQMP
|
|
MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
|
|
endif
|
|
|
|
spl/boot.bin: $(obj)/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkimage)
|
|
endif
|
|
|
|
ALL-y += $(obj)/$(SPL_BIN).bin
|
|
|
|
ifdef CONFIG_SAMSUNG
|
|
ALL-y += $(obj)/$(BOARD)-spl.bin
|
|
endif
|
|
|
|
ifdef CONFIG_ARCH_SOCFPGA
|
|
ALL-y += $(obj)/$(SPL_BIN).sfp
|
|
endif
|
|
|
|
ifdef CONFIG_ARCH_SUNXI
|
|
ALL-y += $(obj)/sunxi-spl.bin
|
|
|
|
ifdef CONFIG_NAND_SUNXI
|
|
ALL-y += $(obj)/sunxi-spl-with-ecc.bin
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SYS_SOC),"at91")
|
|
ALL-y += boot.bin
|
|
endif
|
|
|
|
ALL-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-16bit-spl.bin
|
|
|
|
ALL-$(CONFIG_ARCH_ZYNQ) += $(obj)/boot.bin
|
|
ALL-$(CONFIG_ARCH_ZYNQMP) += $(obj)/boot.bin
|
|
|
|
all: $(ALL-y)
|
|
|
|
quiet_cmd_cat = CAT $@
|
|
cmd_cat = cat $(filter-out $(PHONY), $^) > $@
|
|
|
|
quiet_cmd_copy = COPY $@
|
|
cmd_copy = cp $< $@
|
|
|
|
ifeq ($(CONFIG_SPL_OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),yy)
|
|
$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \
|
|
$(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
|
|
$(obj)/$(SPL_BIN).dtb FORCE
|
|
$(call if_changed,cat)
|
|
|
|
$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-dtb.bin FORCE
|
|
$(call if_changed,copy)
|
|
else
|
|
$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-nodtb.bin FORCE
|
|
$(call if_changed,copy)
|
|
endif
|
|
|
|
# Create a file that pads from the end of u-boot-spl-nodtb.bin to bss_end
|
|
$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN)
|
|
@bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \
|
|
dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null;
|
|
|
|
# Pass the original device tree file through fdtgrep twice. The first pass
|
|
# removes any unwanted nodes (i.e. those which don't have the
|
|
# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second
|
|
# pass removes various unused properties from the remaining nodes.
|
|
# The output is typically a much smaller device tree file.
|
|
ifeq ($(CONFIG_TPL_BUILD),y)
|
|
fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-tpl
|
|
else
|
|
fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-spl
|
|
endif
|
|
quiet_cmd_fdtgrep = FDTGREP $@
|
|
cmd_fdtgrep = $(objtree)/tools/fdtgrep $(fdtgrep_props) -RT $< \
|
|
-n /chosen -O dtb | \
|
|
$(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
|
|
$(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
|
|
|
|
$(obj)/$(SPL_BIN).dtb: dts/dt.dtb $(objtree)/tools/fdtgrep FORCE
|
|
$(call if_changed,fdtgrep)
|
|
|
|
pythonpath = PYTHONPATH=tools
|
|
|
|
quiet_cmd_dtocc = DTOC C $@
|
|
cmd_dtocc = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ platdata
|
|
|
|
quiet_cmd_dtoch = DTOC H $@
|
|
cmd_dtoch = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ struct
|
|
|
|
quiet_cmd_plat = PLAT $@
|
|
cmd_plat = $(CC) $(c_flags) -c $< -o $@
|
|
|
|
$(obj)/dts/dt-platdata.o: $(obj)/dts/dt-platdata.c include/generated/dt-structs.h
|
|
$(call if_changed,plat)
|
|
|
|
PHONY += dts_dir
|
|
dts_dir:
|
|
$(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
|
|
|
|
include/generated/dt-structs.h: $(obj)/$(SPL_BIN).dtb dts_dir dtoc
|
|
$(call if_changed,dtoch)
|
|
|
|
$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir dtoc
|
|
$(call if_changed,dtocc)
|
|
|
|
dtoc: #$(objtree)/tools/_libfdt.so
|
|
|
|
ifdef CONFIG_SAMSUNG
|
|
ifdef CONFIG_VAR_SIZE_SPL
|
|
VAR_SIZE_PARAM = --vs
|
|
else
|
|
VAR_SIZE_PARAM =
|
|
endif
|
|
$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
|
|
$(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
|
|
$(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
|
|
$(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
|
|
endif
|
|
|
|
quiet_cmd_objcopy = OBJCOPY $@
|
|
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
|
|
|
|
OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \
|
|
$(if $(CONFIG_SPL_X86_16BIT_INIT),-R .start16 -R .resetvec)
|
|
|
|
$(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE
|
|
$(call if_changed,objcopy)
|
|
|
|
OBJCOPYFLAGS_u-boot-x86-16bit-spl.bin := -O binary -j .start16 -j .resetvec
|
|
$(obj)/u-boot-x86-16bit-spl.bin: $(obj)/u-boot-spl FORCE
|
|
$(call if_changed,objcopy)
|
|
|
|
LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
|
|
|
|
# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
|
|
LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker)
|
|
|
|
ifneq ($(CONFIG_SPL_TEXT_BASE),)
|
|
LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
|
|
endif
|
|
|
|
MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage
|
|
$(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
|
|
$(call if_changed,mkimage)
|
|
|
|
quiet_cmd_mksunxiboot = MKSUNXI $@
|
|
cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
|
|
$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
|
|
$(call if_changed,mksunxiboot)
|
|
|
|
quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@
|
|
cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \
|
|
-c $(CONFIG_NAND_SUNXI_SPL_ECC_STRENGTH)/$(CONFIG_NAND_SUNXI_SPL_ECC_SIZE) \
|
|
-p $(CONFIG_SYS_NAND_PAGE_SIZE) \
|
|
-o $(CONFIG_SYS_NAND_OOBSIZE) \
|
|
-u $(CONFIG_NAND_SUNXI_SPL_USABLE_PAGE_SIZE) \
|
|
-e $(CONFIG_SYS_NAND_BLOCK_SIZE) \
|
|
-s -b $< $@
|
|
$(obj)/sunxi-spl-with-ecc.bin: $(obj)/sunxi-spl.bin
|
|
$(call if_changed,sunxi_spl_image_builder)
|
|
|
|
# Rule to link u-boot-spl
|
|
# May be overridden by arch/$(ARCH)/config.mk
|
|
quiet_cmd_u-boot-spl ?= LD $@
|
|
cmd_u-boot-spl ?= (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
|
|
$(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
|
|
$(patsubst $(obj)/%,%,$(u-boot-spl-main)) \
|
|
$(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) \
|
|
--end-group \
|
|
$(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN))
|
|
|
|
$(obj)/$(SPL_BIN): $(u-boot-spl-platdata) $(u-boot-spl-init) \
|
|
$(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE
|
|
$(call if_changed,u-boot-spl)
|
|
|
|
$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
|
|
|
|
PHONY += $(u-boot-spl-dirs)
|
|
$(u-boot-spl-dirs): $(u-boot-spl-platdata)
|
|
$(Q)$(MAKE) $(build)=$@
|
|
|
|
quiet_cmd_cpp_lds = LDS $@
|
|
cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
|
|
-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
|
|
|
|
$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
|
|
$(call if_changed_dep,cpp_lds)
|
|
|
|
# read all saved command lines
|
|
|
|
targets := $(wildcard $(sort $(targets)))
|
|
cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
|
|
|
|
ifneq ($(cmd_files),)
|
|
$(cmd_files): ; # Do not try to update included dependency files
|
|
include $(cmd_files)
|
|
endif
|
|
|
|
PHONY += FORCE
|
|
FORCE:
|
|
|
|
# Declare the contents of the .PHONY variable as phony. We keep that
|
|
# information in a variable so we can use it in if_changed and friends.
|
|
.PHONY: $(PHONY)
|