mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 15:23:07 +00:00
0a137ac501
Some SoCs of the H616 family use a die variant, that puts some CPU power and reset control registers at a different address. There are examples of two instances of the same board, using different die revisions of the otherwise same H313 SoC. We need to write to a register in that block *very* early in the SPL boot, to switch the core to AArch64. Since the devices are otherwise indistinguishable, let the SPL code read that die variant and use the respective RVBAR address based on that. That is a bit tricky, since we need to do that in hand-coded AArch32 machine language, shared by all 64-bit SoCs. To avoid build dependencies in this mess, we always provide two addresses to choose from, and just give identical values for all other SoCs. This allows the same code to run on all 64-bit SoCs, and controls this switch behaviour purely from Kconfig. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
59 lines
2 KiB
C
59 lines
2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Configuration settings for the Allwinner A64 (sun50i) CPU
|
|
*/
|
|
|
|
#if defined(CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER) && !defined(CONFIG_SPL_BUILD)
|
|
/* reserve space for BOOT0 header information */
|
|
b reset
|
|
.space 1532
|
|
#elif defined(CONFIG_ARM_BOOT_HOOK_RMR)
|
|
/*
|
|
* Switch into AArch64 if needed.
|
|
* Refer to arch/arm/mach-sunxi/rmr_switch.S for the original source.
|
|
*/
|
|
tst x0, x0 // this is "b #0x84" in ARM
|
|
b reset
|
|
.space 0x7c
|
|
|
|
.word 0xe28f0070 // add r0, pc, #112 // @(fel_stash - .)
|
|
.word 0xe59f106c // ldr r1, [pc, #108] // fel_stash - .
|
|
.word 0xe0800001 // add r0, r0, r1
|
|
.word 0xe580d000 // str sp, [r0]
|
|
.word 0xe580e004 // str lr, [r0, #4]
|
|
.word 0xe10fe000 // mrs lr, CPSR
|
|
.word 0xe580e008 // str lr, [r0, #8]
|
|
.word 0xee11ef10 // mrc 15, 0, lr, cr1, cr0, {0}
|
|
.word 0xe580e00c // str lr, [r0, #12]
|
|
.word 0xee1cef10 // mrc 15, 0, lr, cr12, cr0, {0}
|
|
.word 0xe580e010 // str lr, [r0, #16]
|
|
|
|
.word 0xe59f1034 // ldr r1, [pc, #52] ; RVBAR_ADDRESS
|
|
.word 0xe59f0034 // ldr r0, [pc, #52] ; SUNXI_SRAMC_BASE
|
|
.word 0xe5900024 // ldr r0, [r0, #36] ; SRAM_VER_REG
|
|
.word 0xe21000ff // ands r0, r0, #255 ; 0xff
|
|
.word 0x159f102c // ldrne r1, [pc, #44] ; RVBAR_ALTERNATIVE
|
|
.word 0xe59f002c // ldr r0, [pc, #44] ; CONFIG_*TEXT_BASE
|
|
.word 0xe5810000 // str r0, [r1]
|
|
.word 0xf57ff04f // dsb sy
|
|
.word 0xf57ff06f // isb sy
|
|
.word 0xee1c0f50 // mrc 15, 0, r0, cr12, cr0, {2} ; RMR
|
|
.word 0xe3800003 // orr r0, r0, #3
|
|
.word 0xee0c0f50 // mcr 15, 0, r0, cr12, cr0, {2} ; RMR
|
|
.word 0xf57ff06f // isb sy
|
|
.word 0xe320f003 // wfi
|
|
.word 0xeafffffd // b @wfi
|
|
|
|
.word CONFIG_SUNXI_RVBAR_ADDRESS // writable RVBAR mapping addr
|
|
.word SUNXI_SRAMC_BASE
|
|
.word CONFIG_SUNXI_RVBAR_ALTERNATIVE // address for die variant
|
|
#ifdef CONFIG_SPL_BUILD
|
|
.word CONFIG_SPL_TEXT_BASE
|
|
#else
|
|
.word CONFIG_TEXT_BASE
|
|
#endif
|
|
.word fel_stash - .
|
|
#else
|
|
/* normal execution */
|
|
b reset
|
|
#endif
|