mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 11:18:28 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
370 lines
7.9 KiB
C
370 lines
7.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2012 Samsung Electronics
|
|
* R. Chandrasekar <rcsekar@samsung.com>
|
|
*/
|
|
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/i2s-regs.h>
|
|
#include <asm/io.h>
|
|
#include <common.h>
|
|
#include <sound.h>
|
|
#include <i2s.h>
|
|
|
|
#define FIC_TX2COUNT(x) (((x) >> 24) & 0xf)
|
|
#define FIC_TX1COUNT(x) (((x) >> 16) & 0xf)
|
|
#define FIC_TXCOUNT(x) (((x) >> 8) & 0xf)
|
|
#define FIC_RXCOUNT(x) (((x) >> 0) & 0xf)
|
|
#define FICS_TXCOUNT(x) (((x) >> 8) & 0x7f)
|
|
|
|
#define TIMEOUT_I2S_TX 100 /* i2s transfer timeout */
|
|
|
|
/*
|
|
* Sets the frame size for I2S LR clock
|
|
*
|
|
* @param i2s_reg i2s regiter address
|
|
* @param rfs Frame Size
|
|
*/
|
|
static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs)
|
|
{
|
|
unsigned int mod = readl(&i2s_reg->mod);
|
|
|
|
mod &= ~MOD_RCLK_MASK;
|
|
|
|
switch (rfs) {
|
|
case 768:
|
|
mod |= MOD_RCLK_768FS;
|
|
break;
|
|
case 512:
|
|
mod |= MOD_RCLK_512FS;
|
|
break;
|
|
case 384:
|
|
mod |= MOD_RCLK_384FS;
|
|
break;
|
|
default:
|
|
mod |= MOD_RCLK_256FS;
|
|
break;
|
|
}
|
|
|
|
writel(mod, &i2s_reg->mod);
|
|
}
|
|
|
|
/*
|
|
* Sets the i2s transfer control
|
|
*
|
|
* @param i2s_reg i2s regiter address
|
|
* @param on 1 enable tx , 0 disable tx transfer
|
|
*/
|
|
static void i2s_txctrl(struct i2s_reg *i2s_reg, int on)
|
|
{
|
|
unsigned int con = readl(&i2s_reg->con);
|
|
unsigned int mod = readl(&i2s_reg->mod) & ~MOD_MASK;
|
|
|
|
if (on) {
|
|
con |= CON_ACTIVE;
|
|
con &= ~CON_TXCH_PAUSE;
|
|
} else {
|
|
con |= CON_TXCH_PAUSE;
|
|
con &= ~CON_ACTIVE;
|
|
}
|
|
|
|
writel(mod, &i2s_reg->mod);
|
|
writel(con, &i2s_reg->con);
|
|
}
|
|
|
|
/*
|
|
* set the bit clock frame size (in multiples of LRCLK)
|
|
*
|
|
* @param i2s_reg i2s regiter address
|
|
* @param bfs bit Frame Size
|
|
*/
|
|
static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs)
|
|
{
|
|
unsigned int mod = readl(&i2s_reg->mod);
|
|
|
|
mod &= ~MOD_BCLK_MASK;
|
|
|
|
switch (bfs) {
|
|
case 48:
|
|
mod |= MOD_BCLK_48FS;
|
|
break;
|
|
case 32:
|
|
mod |= MOD_BCLK_32FS;
|
|
break;
|
|
case 24:
|
|
mod |= MOD_BCLK_24FS;
|
|
break;
|
|
case 16:
|
|
mod |= MOD_BCLK_16FS;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
writel(mod, &i2s_reg->mod);
|
|
}
|
|
|
|
/*
|
|
* flushes the i2stx fifo
|
|
*
|
|
* @param i2s_reg i2s regiter address
|
|
* @param flush Tx fifo flush command (0x00 - do not flush
|
|
* 0x80 - flush tx fifo)
|
|
*/
|
|
void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush)
|
|
{
|
|
/* Flush the FIFO */
|
|
setbits_le32(&i2s_reg->fic, flush);
|
|
clrbits_le32(&i2s_reg->fic, flush);
|
|
}
|
|
|
|
/*
|
|
* Set System Clock direction
|
|
*
|
|
* @param i2s_reg i2s regiter address
|
|
* @param dir Clock direction
|
|
*
|
|
* @return int value 0 for success, -1 in case of error
|
|
*/
|
|
int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir)
|
|
{
|
|
unsigned int mod = readl(&i2s_reg->mod);
|
|
|
|
if (dir == SND_SOC_CLOCK_IN)
|
|
mod |= MOD_CDCLKCON;
|
|
else
|
|
mod &= ~MOD_CDCLKCON;
|
|
|
|
writel(mod, &i2s_reg->mod);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Sets I2S Clcok format
|
|
*
|
|
* @param fmt i2s clock properties
|
|
* @param i2s_reg i2s regiter address
|
|
*
|
|
* @return int value 0 for success, -1 in case of error
|
|
*/
|
|
int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt)
|
|
{
|
|
unsigned int mod = readl(&i2s_reg->mod);
|
|
unsigned int tmp = 0;
|
|
unsigned int ret = 0;
|
|
|
|
/* Format is priority */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
tmp |= MOD_LR_RLOW;
|
|
tmp |= MOD_SDF_MSB;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
tmp |= MOD_LR_RLOW;
|
|
tmp |= MOD_SDF_LSB;
|
|
break;
|
|
case SND_SOC_DAIFMT_I2S:
|
|
tmp |= MOD_SDF_IIS;
|
|
break;
|
|
default:
|
|
debug("%s: Invalid format priority [0x%x]\n", __func__,
|
|
(fmt & SND_SOC_DAIFMT_FORMAT_MASK));
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* INV flag is relative to the FORMAT flag - if set it simply
|
|
* flips the polarity specified by the Standard
|
|
*/
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
if (tmp & MOD_LR_RLOW)
|
|
tmp &= ~MOD_LR_RLOW;
|
|
else
|
|
tmp |= MOD_LR_RLOW;
|
|
break;
|
|
default:
|
|
debug("%s: Invalid clock ploarity input [0x%x]\n", __func__,
|
|
(fmt & SND_SOC_DAIFMT_INV_MASK));
|
|
return -1;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
tmp |= MOD_SLAVE;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
/* Set default source clock in Master mode */
|
|
ret = i2s_set_sysclk_dir(i2s_reg, SND_SOC_CLOCK_OUT);
|
|
if (ret != 0) {
|
|
debug("%s:set i2s clock direction failed\n", __func__);
|
|
return -1;
|
|
}
|
|
break;
|
|
default:
|
|
debug("%s: Invalid master selection [0x%x]\n", __func__,
|
|
(fmt & SND_SOC_DAIFMT_MASTER_MASK));
|
|
return -1;
|
|
}
|
|
|
|
mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE);
|
|
mod |= tmp;
|
|
writel(mod, &i2s_reg->mod);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Sets the sample width in bits
|
|
*
|
|
* @param blc samplewidth (size of sample in bits)
|
|
* @param i2s_reg i2s regiter address
|
|
*
|
|
* @return int value 0 for success, -1 in case of error
|
|
*/
|
|
int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc)
|
|
{
|
|
unsigned int mod = readl(&i2s_reg->mod);
|
|
|
|
mod &= ~MOD_BLCP_MASK;
|
|
mod &= ~MOD_BLC_MASK;
|
|
|
|
switch (blc) {
|
|
case 8:
|
|
mod |= MOD_BLCP_8BIT;
|
|
mod |= MOD_BLC_8BIT;
|
|
break;
|
|
case 16:
|
|
mod |= MOD_BLCP_16BIT;
|
|
mod |= MOD_BLC_16BIT;
|
|
break;
|
|
case 24:
|
|
mod |= MOD_BLCP_24BIT;
|
|
mod |= MOD_BLC_24BIT;
|
|
break;
|
|
default:
|
|
debug("%s: Invalid sample size input [0x%x]\n",
|
|
__func__, blc);
|
|
return -1;
|
|
}
|
|
writel(mod, &i2s_reg->mod);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned int *data,
|
|
unsigned long data_size)
|
|
{
|
|
int i;
|
|
int start;
|
|
struct i2s_reg *i2s_reg =
|
|
(struct i2s_reg *)pi2s_tx->base_address;
|
|
|
|
if (data_size < FIFO_LENGTH) {
|
|
debug("%s : Invalid data size\n", __func__);
|
|
return -1; /* invalid pcm data size */
|
|
}
|
|
|
|
/* fill the tx buffer before stating the tx transmit */
|
|
for (i = 0; i < FIFO_LENGTH; i++)
|
|
writel(*data++, &i2s_reg->txd);
|
|
|
|
data_size -= FIFO_LENGTH;
|
|
i2s_txctrl(i2s_reg, I2S_TX_ON);
|
|
|
|
while (data_size > 0) {
|
|
start = get_timer(0);
|
|
if (!(CON_TXFIFO_FULL & (readl(&i2s_reg->con)))) {
|
|
writel(*data++, &i2s_reg->txd);
|
|
data_size--;
|
|
} else {
|
|
if (get_timer(start) > TIMEOUT_I2S_TX) {
|
|
i2s_txctrl(i2s_reg, I2S_TX_OFF);
|
|
debug("%s: I2S Transfer Timeout\n", __func__);
|
|
return -1;
|
|
}
|
|
}
|
|
}
|
|
i2s_txctrl(i2s_reg, I2S_TX_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i2s_tx_init(struct i2stx_info *pi2s_tx)
|
|
{
|
|
int ret;
|
|
struct i2s_reg *i2s_reg =
|
|
(struct i2s_reg *)pi2s_tx->base_address;
|
|
if (pi2s_tx->id == 0) {
|
|
/* Initialize GPIO for I2S-0 */
|
|
exynos_pinmux_config(PERIPH_ID_I2S0, 0);
|
|
|
|
/* Set EPLL Clock */
|
|
ret = set_epll_clk(pi2s_tx->samplingrate * pi2s_tx->rfs * 4);
|
|
} else if (pi2s_tx->id == 1) {
|
|
/* Initialize GPIO for I2S-1 */
|
|
exynos_pinmux_config(PERIPH_ID_I2S1, 0);
|
|
|
|
/* Set EPLL Clock */
|
|
ret = set_epll_clk(pi2s_tx->audio_pll_clk);
|
|
} else {
|
|
debug("%s: unsupported i2s-%d bus\n", __func__, pi2s_tx->id);
|
|
return -1;
|
|
}
|
|
|
|
if (ret != 0) {
|
|
debug("%s: epll clock set rate failed\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/* Select Clk Source for Audio 0 or 1 */
|
|
ret = set_i2s_clk_source(pi2s_tx->id);
|
|
if (ret == -1) {
|
|
debug("%s: unsupported clock for i2s-%d\n", __func__,
|
|
pi2s_tx->id);
|
|
return -1;
|
|
}
|
|
|
|
if (pi2s_tx->id == 0) {
|
|
/*Reset the i2s module */
|
|
writel(CON_RESET, &i2s_reg->con);
|
|
|
|
writel(MOD_OP_CLK | MOD_RCLKSRC, &i2s_reg->mod);
|
|
/* set i2s prescaler */
|
|
writel(PSREN | PSVAL, &i2s_reg->psr);
|
|
} else {
|
|
/* Set Prescaler to get MCLK */
|
|
ret = set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk,
|
|
(pi2s_tx->samplingrate * (pi2s_tx->rfs)),
|
|
pi2s_tx->id);
|
|
}
|
|
if (ret == -1) {
|
|
debug("%s: unsupported prescalar for i2s-%d\n", __func__,
|
|
pi2s_tx->id);
|
|
return -1;
|
|
}
|
|
|
|
/* Configure I2s format */
|
|
ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
|
|
SND_SOC_DAIFMT_CBM_CFM));
|
|
if (ret == 0) {
|
|
i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs);
|
|
ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample);
|
|
if (ret != 0) {
|
|
debug("%s:set sample rate failed\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
i2s_set_bitclk_framesize(i2s_reg, pi2s_tx->bfs);
|
|
/* disable i2s transfer flag and flush the fifo */
|
|
i2s_txctrl(i2s_reg, I2S_TX_OFF);
|
|
i2s_fifo(i2s_reg, FIC_TXFLUSH);
|
|
} else {
|
|
debug("%s: failed\n", __func__);
|
|
}
|
|
|
|
return ret;
|
|
}
|