u-boot/drivers/usb/host/utmi-armada100.c
Ajay Bhargav c7c47ca246 Update Maintainer and Author's email address
I am not longer using my old email address
"ajay.bhargav@einfochips.com". For U-Boot development email address is
now updated to contact@8051projects.net

Signed-off-by: Ajay Bhargav <contact@8051projects.net>
2016-12-27 11:24:17 -05:00

80 lines
1.9 KiB
C

/*
* (C) Copyright 2012
* eInfochips Ltd. <www.einfochips.com>
* Written-by: Ajay Bhargav <contact@8051projects.net>
*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <usb.h>
#include <asm/arch/cpu.h>
#include <asm/arch/armada100.h>
#include <asm/arch/utmi-armada100.h>
static int utmi_phy_init(void)
{
struct armd1usb_phy_reg *phy_regs =
(struct armd1usb_phy_reg *)UTMI_PHY_BASE;
int timeout;
setbits_le32(&phy_regs->utmi_ctrl, INPKT_DELAY_SOF | PLL_PWR_UP);
udelay(1000);
setbits_le32(&phy_regs->utmi_ctrl, PHY_PWR_UP);
clrbits_le32(&phy_regs->utmi_pll, PLL_FBDIV_MASK | PLL_REFDIV_MASK);
setbits_le32(&phy_regs->utmi_pll, N_DIVIDER << PLL_FBDIV | M_DIVIDER);
setbits_le32(&phy_regs->utmi_tx, PHSEL_VAL << CK60_PHSEL);
/* Calibrate pll */
timeout = 10000;
while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0))
;
if (!timeout)
return -1;
udelay(200);
setbits_le32(&phy_regs->utmi_pll, VCOCAL_START);
udelay(400);
clrbits_le32(&phy_regs->utmi_pll, VCOCAL_START);
udelay(200);
setbits_le32(&phy_regs->utmi_tx, RCAL_START);
udelay(400);
clrbits_le32(&phy_regs->utmi_tx, RCAL_START);
timeout = 10000;
while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0))
;
if (!timeout)
return -1;
return 0;
}
/*
* Initialize USB host controller's UTMI Physical interface
*/
int utmi_init(void)
{
struct armd1mpmu_registers *mpmu_regs =
(struct armd1mpmu_registers *)ARMD1_MPMU_BASE;
struct armd1apmu_registers *apmu_regs =
(struct armd1apmu_registers *)ARMD1_APMU_BASE;
/* Turn on 26Mhz ref clock for UTMI PLL */
setbits_le32(&mpmu_regs->acgr, APB2_26M_EN | AP_26M);
/* USB Clock reset */
writel(USB_SPH_AXICLK_EN, &apmu_regs->usbcrc);
writel(USB_SPH_AXICLK_EN | USB_SPH_AXI_RST, &apmu_regs->usbcrc);
/* Initialize UTMI transceiver */
return utmi_phy_init();
}