mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
741ef86728
Add a structure which defines the information that is needed for executing capsule updates on a platform. Some information in the structure like the dfu string is used for making the update process more robust while some information like the per platform image GUIDs is used for fixing issues. Initialise this structure in the board file, and use the information for the capsule updates. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
188 lines
4 KiB
C
188 lines
4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
#include "pitx_misc.h"
|
|
#include <common.h>
|
|
#include <efi.h>
|
|
#include <efi_loader.h>
|
|
#include <init.h>
|
|
#include <mmc.h>
|
|
#include <miiphy.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx8mq_pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <asm/mach-imx/gpio.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
|
|
#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)
|
|
|
|
static iomux_v3_cfg_t const wdog_pads[] = {
|
|
IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const uart_pads[] = {
|
|
IMX8MQ_PAD_UART3_RXD__UART3_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
IMX8MQ_PAD_UART3_TXD__UART3_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
IMX8MQ_PAD_ECSPI1_SS0__UART3_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
IMX8MQ_PAD_ECSPI1_MISO__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
|
|
struct efi_fw_image fw_images[] = {
|
|
{
|
|
.image_type_id = KONTRON_PITX_IMX8M_FIT_IMAGE_GUID,
|
|
.fw_name = u"KONTRON-PITX-IMX8M-UBOOT",
|
|
.image_index = 1,
|
|
},
|
|
};
|
|
|
|
struct efi_capsule_update_info update_info = {
|
|
.dfu_string = "mmc 0=flash-bin raw 0x42 0x1000 mmcpart 1",
|
|
.images = fw_images,
|
|
};
|
|
|
|
u8 num_image_type_guids = ARRAY_SIZE(fw_images);
|
|
#endif /* EFI_HAVE_CAPSULE_SUPPORT */
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
|
|
|
|
imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
|
|
set_wdog_reset(wdog);
|
|
|
|
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_phys_sdram_size(phys_size_t *memsize)
|
|
{
|
|
int variant = 0;
|
|
|
|
variant = get_pitx_board_variant();
|
|
|
|
switch(variant) {
|
|
case 2:
|
|
*memsize = 0x80000000;
|
|
break;
|
|
case 3:
|
|
*memsize = 0x100000000;
|
|
break;
|
|
default:
|
|
printf("Unknown DDR type!!!\n");
|
|
*memsize = 0x40000000;
|
|
break;
|
|
}
|
|
|
|
debug("Memsize: %d MiB\n", (int)(*memsize >> 20));
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_FEC_MXC
|
|
#define FEC_RST_PAD IMX_GPIO_NR(1, 11)
|
|
static iomux_v3_cfg_t const fec1_rst_pads[] = {
|
|
IMX8MQ_PAD_GPIO1_IO11__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
static void setup_iomux_fec(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(fec1_rst_pads,
|
|
ARRAY_SIZE(fec1_rst_pads));
|
|
}
|
|
|
|
static int setup_fec(void)
|
|
{
|
|
struct iomuxc_gpr_base_regs *gpr =
|
|
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
|
|
|
|
setup_iomux_fec();
|
|
|
|
/* Use 125M anatop REF_CLK1 for ENET1, not from external */
|
|
clrsetbits_le32(&gpr->gpr[1], BIT(13) | BIT(17), 0);
|
|
return set_clk_enet(ENET_125MHZ);
|
|
}
|
|
|
|
int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
unsigned int val;
|
|
|
|
/*
|
|
* Set LED configuration register 1:
|
|
* LED2_SEL: 0b1011 (link established, blink on activity)
|
|
*/
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, 0x18);
|
|
val &= 0xf0ff;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x18, val | (0xb << 8));
|
|
|
|
if (phydev->drv->config)
|
|
phydev->drv->config(phydev);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
#ifdef CONFIG_FEC_MXC
|
|
setup_fec();
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_DWC3)
|
|
init_usb_clk();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_MISC_INIT_R
|
|
#define TPM_RESET IMX_GPIO_NR(3, 2)
|
|
#define USBHUB_RESET IMX_GPIO_NR(3, 4)
|
|
|
|
static void reset_device_by_gpio(const char *label, int pin, int delay_ms)
|
|
{
|
|
gpio_request(pin, label);
|
|
gpio_direction_output(pin, 0);
|
|
mdelay(delay_ms);
|
|
gpio_direction_output(pin, 1);
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
/*
|
|
* reset TPM chip (Infineon SLB9670) as required by datasheet
|
|
* (60ms minimum Reset Inactive Time, 70ms implemented)
|
|
*/
|
|
reset_device_by_gpio("tpm_reset", TPM_RESET, 70);
|
|
|
|
/*
|
|
* reset USB hub as required by datasheet
|
|
* (3ms minimum reset duration, 10ms implemented)
|
|
*/
|
|
reset_device_by_gpio("usbhub_reset", USBHUB_RESET, 10);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int board_mmc_get_env_dev(int devno)
|
|
{
|
|
return devno;
|
|
}
|
|
|
|
uint mmc_get_env_part(struct mmc *mmc)
|
|
{
|
|
/* part 1 for eMMC, part 1 for SD card */
|
|
return (mmc_get_env_dev() == 0) ? 1 : 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
return 0;
|
|
}
|