u-boot/arch/arm/cpu/arm926ejs/spear/cpu.c
Stefan Roese e8d056989a usb: spear: Add support for both SPEAr600 EHCI controllers
USB EHCI on SPEAr600 has not been tested for a while. The base controller
addresses are missing. This patch adds the defines to the header. And adds
the missing code.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vipin Kumar <vk.vipin@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2015-08-19 22:30:20 +02:00

75 lines
1.6 KiB
C

/*
* (C) Copyright 2010
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/spr_misc.h>
int arch_cpu_init(void)
{
struct misc_regs *const misc_p =
(struct misc_regs *)CONFIG_SPEAR_MISCBASE;
u32 periph1_clken, periph_clk_cfg;
periph1_clken = readl(&misc_p->periph1_clken);
#if defined(CONFIG_SPEAR3XX)
periph1_clken |= MISC_GPT2ENB;
#elif defined(CONFIG_SPEAR600)
periph1_clken |= MISC_GPT3ENB;
#endif
#if defined(CONFIG_PL011_SERIAL)
periph1_clken |= MISC_UART0ENB;
periph_clk_cfg = readl(&misc_p->periph_clk_cfg);
periph_clk_cfg &= ~CONFIG_SPEAR_UARTCLKMSK;
periph_clk_cfg |= CONFIG_SPEAR_UART48M;
writel(periph_clk_cfg, &misc_p->periph_clk_cfg);
#endif
#if defined(CONFIG_ETH_DESIGNWARE)
periph1_clken |= MISC_ETHENB;
#endif
#if defined(CONFIG_DW_UDC)
periph1_clken |= MISC_USBDENB;
#endif
#if defined(CONFIG_SYS_I2C_DW)
periph1_clken |= MISC_I2CENB;
#endif
#if defined(CONFIG_ST_SMI)
periph1_clken |= MISC_SMIENB;
#endif
#if defined(CONFIG_NAND_FSMC)
periph1_clken |= MISC_FSMCENB;
#endif
#if defined(CONFIG_USB_EHCI_SPEAR)
periph1_clken |= PERIPH_USBH1 | PERIPH_USBH2;
#endif
writel(periph1_clken, &misc_p->periph1_clken);
return 0;
}
#ifdef CONFIG_DISPLAY_CPUINFO
int print_cpuinfo(void)
{
#ifdef CONFIG_SPEAR300
printf("CPU: SPEAr300\n");
#elif defined(CONFIG_SPEAR310)
printf("CPU: SPEAr310\n");
#elif defined(CONFIG_SPEAR320)
printf("CPU: SPEAr320\n");
#elif defined(CONFIG_SPEAR600)
printf("CPU: SPEAr600\n");
#else
#error CPU not supported in spear platform
#endif
return 0;
}
#endif