mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
774 lines
21 KiB
C
774 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2011 The Chromium OS Authors.
|
|
* (C) Copyright 2010-2015
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*/
|
|
|
|
/* Tegra20 Clock control functions */
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/tegra.h>
|
|
#include <asm/arch-tegra/clk_rst.h>
|
|
#include <asm/arch-tegra/timer.h>
|
|
#include <div64.h>
|
|
#include <fdtdec.h>
|
|
#include <linux/delay.h>
|
|
|
|
/*
|
|
* Clock types that we can use as a source. The Tegra20 has muxes for the
|
|
* peripheral clocks, and in most cases there are four options for the clock
|
|
* source. This gives us a clock 'type' and exploits what commonality exists
|
|
* in the device.
|
|
*
|
|
* Letters are obvious, except for T which means CLK_M, and S which means the
|
|
* clock derived from 32KHz. Beware that CLK_M (also called OSC in the
|
|
* datasheet) and PLL_M are different things. The former is the basic
|
|
* clock supplied to the SOC from an external oscillator. The latter is the
|
|
* memory clock PLL.
|
|
*
|
|
* See definitions in clock_id in the header file.
|
|
*/
|
|
enum clock_type_id {
|
|
CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */
|
|
CLOCK_TYPE_MCPA, /* and so on */
|
|
CLOCK_TYPE_MCPT,
|
|
CLOCK_TYPE_PCM,
|
|
CLOCK_TYPE_PCMT,
|
|
CLOCK_TYPE_PCMT16, /* CLOCK_TYPE_PCMT with 16-bit divider */
|
|
CLOCK_TYPE_PCXTS,
|
|
CLOCK_TYPE_PDCT,
|
|
|
|
CLOCK_TYPE_COUNT,
|
|
CLOCK_TYPE_NONE = -1, /* invalid clock type */
|
|
};
|
|
|
|
enum {
|
|
CLOCK_MAX_MUX = 4 /* number of source options for each clock */
|
|
};
|
|
|
|
/*
|
|
* Clock source mux for each clock type. This just converts our enum into
|
|
* a list of mux sources for use by the code. Note that CLOCK_TYPE_PCXTS
|
|
* is special as it has 5 sources. Since it also has a different number of
|
|
* bits in its register for the source, we just handle it with a special
|
|
* case in the code.
|
|
*/
|
|
#define CLK(x) CLOCK_ID_ ## x
|
|
static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX] = {
|
|
{ CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC) },
|
|
{ CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO) },
|
|
{ CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC) },
|
|
{ CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE) },
|
|
{ CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC) },
|
|
{ CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC) },
|
|
{ CLK(PERIPH), CLK(CGENERAL), CLK(XCPU), CLK(OSC) },
|
|
{ CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC) },
|
|
};
|
|
|
|
/*
|
|
* Clock peripheral IDs which sadly don't match up with PERIPH_ID. This is
|
|
* not in the header file since it is for purely internal use - we want
|
|
* callers to use the PERIPH_ID for all access to peripheral clocks to avoid
|
|
* confusion bewteen PERIPH_ID_... and PERIPHC_...
|
|
*
|
|
* We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
|
|
* confusing.
|
|
*
|
|
* Note to SOC vendors: perhaps define a unified numbering for peripherals and
|
|
* use it for reset, clock enable, clock source/divider and even pinmuxing
|
|
* if you can.
|
|
*/
|
|
enum periphc_internal_id {
|
|
/* 0x00 */
|
|
PERIPHC_I2S1,
|
|
PERIPHC_I2S2,
|
|
PERIPHC_SPDIF_OUT,
|
|
PERIPHC_SPDIF_IN,
|
|
PERIPHC_PWM,
|
|
PERIPHC_SPI1,
|
|
PERIPHC_SPI2,
|
|
PERIPHC_SPI3,
|
|
|
|
/* 0x08 */
|
|
PERIPHC_XIO,
|
|
PERIPHC_I2C1,
|
|
PERIPHC_DVC_I2C,
|
|
PERIPHC_TWC,
|
|
PERIPHC_0c,
|
|
PERIPHC_10, /* PERIPHC_SPI1, what is this really? */
|
|
PERIPHC_DISP1,
|
|
PERIPHC_DISP2,
|
|
|
|
/* 0x10 */
|
|
PERIPHC_CVE,
|
|
PERIPHC_IDE0,
|
|
PERIPHC_VI,
|
|
PERIPHC_1c,
|
|
PERIPHC_SDMMC1,
|
|
PERIPHC_SDMMC2,
|
|
PERIPHC_G3D,
|
|
PERIPHC_G2D,
|
|
|
|
/* 0x18 */
|
|
PERIPHC_NDFLASH,
|
|
PERIPHC_SDMMC4,
|
|
PERIPHC_VFIR,
|
|
PERIPHC_EPP,
|
|
PERIPHC_MPE,
|
|
PERIPHC_MIPI,
|
|
PERIPHC_UART1,
|
|
PERIPHC_UART2,
|
|
|
|
/* 0x20 */
|
|
PERIPHC_HOST1X,
|
|
PERIPHC_21,
|
|
PERIPHC_TVO,
|
|
PERIPHC_HDMI,
|
|
PERIPHC_24,
|
|
PERIPHC_TVDAC,
|
|
PERIPHC_I2C2,
|
|
PERIPHC_EMC,
|
|
|
|
/* 0x28 */
|
|
PERIPHC_UART3,
|
|
PERIPHC_29,
|
|
PERIPHC_VI_SENSOR,
|
|
PERIPHC_2b,
|
|
PERIPHC_2c,
|
|
PERIPHC_SPI4,
|
|
PERIPHC_I2C3,
|
|
PERIPHC_SDMMC3,
|
|
|
|
/* 0x30 */
|
|
PERIPHC_UART4,
|
|
PERIPHC_UART5,
|
|
PERIPHC_VDE,
|
|
PERIPHC_OWR,
|
|
PERIPHC_NOR,
|
|
PERIPHC_CSITE,
|
|
|
|
PERIPHC_COUNT,
|
|
|
|
PERIPHC_NONE = -1,
|
|
};
|
|
|
|
/*
|
|
* Clock type for each peripheral clock source. We put the name in each
|
|
* record just so it is easy to match things up
|
|
*/
|
|
#define TYPE(name, type) type
|
|
static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
|
|
/* 0x00 */
|
|
TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT),
|
|
TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT),
|
|
TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
|
|
TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM),
|
|
TYPE(PERIPHC_PWM, CLOCK_TYPE_PCXTS),
|
|
TYPE(PERIPHC_SPI1, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_SPI22, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_SPI3, CLOCK_TYPE_PCMT),
|
|
|
|
/* 0x08 */
|
|
TYPE(PERIPHC_XIO, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16),
|
|
TYPE(PERIPHC_DVC_I2C, CLOCK_TYPE_PCMT16),
|
|
TYPE(PERIPHC_TWC, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_SPI1, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_DISP1, CLOCK_TYPE_PDCT),
|
|
TYPE(PERIPHC_DISP2, CLOCK_TYPE_PDCT),
|
|
|
|
/* 0x10 */
|
|
TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT),
|
|
TYPE(PERIPHC_IDE0, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
|
|
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA),
|
|
TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA),
|
|
|
|
/* 0x18 */
|
|
TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA),
|
|
TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA),
|
|
TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT),
|
|
|
|
/* 0x20 */
|
|
TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA),
|
|
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT),
|
|
TYPE(PERIPHC_HDMI, CLOCK_TYPE_PDCT),
|
|
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT),
|
|
TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16),
|
|
TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT),
|
|
|
|
/* 0x28 */
|
|
TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
|
|
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_SPI4, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16),
|
|
TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT),
|
|
|
|
/* 0x30 */
|
|
TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT),
|
|
};
|
|
|
|
/*
|
|
* This array translates a periph_id to a periphc_internal_id
|
|
*
|
|
* Not present/matched up:
|
|
* uint vi_sensor; _VI_SENSOR_0, 0x1A8
|
|
* SPDIF - which is both 0x08 and 0x0c
|
|
*
|
|
*/
|
|
#define NONE(name) (-1)
|
|
#define OFFSET(name, value) PERIPHC_ ## name
|
|
static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
|
|
/* Low word: 31:0 */
|
|
NONE(CPU),
|
|
NONE(RESERVED1),
|
|
NONE(RESERVED2),
|
|
NONE(AC97),
|
|
NONE(RTC),
|
|
NONE(TMR),
|
|
PERIPHC_UART1,
|
|
PERIPHC_UART2, /* and vfir 0x68 */
|
|
|
|
/* 0x08 */
|
|
NONE(GPIO),
|
|
PERIPHC_SDMMC2,
|
|
NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */
|
|
PERIPHC_I2S1,
|
|
PERIPHC_I2C1,
|
|
PERIPHC_NDFLASH,
|
|
PERIPHC_SDMMC1,
|
|
PERIPHC_SDMMC4,
|
|
|
|
/* 0x10 */
|
|
PERIPHC_TWC,
|
|
PERIPHC_PWM,
|
|
PERIPHC_I2S2,
|
|
PERIPHC_EPP,
|
|
PERIPHC_VI,
|
|
PERIPHC_G2D,
|
|
NONE(USBD),
|
|
NONE(ISP),
|
|
|
|
/* 0x18 */
|
|
PERIPHC_G3D,
|
|
PERIPHC_IDE0,
|
|
PERIPHC_DISP2,
|
|
PERIPHC_DISP1,
|
|
PERIPHC_HOST1X,
|
|
NONE(VCP),
|
|
NONE(RESERVED30),
|
|
NONE(CACHE2),
|
|
|
|
/* Middle word: 63:32 */
|
|
NONE(MEM),
|
|
NONE(AHBDMA),
|
|
NONE(APBDMA),
|
|
NONE(RESERVED35),
|
|
NONE(KBC),
|
|
NONE(STAT_MON),
|
|
NONE(PMC),
|
|
NONE(FUSE),
|
|
|
|
/* 0x28 */
|
|
NONE(KFUSE),
|
|
NONE(SBC1), /* SBC1, 0x34, is this SPI1? */
|
|
PERIPHC_NOR,
|
|
PERIPHC_SPI1,
|
|
PERIPHC_SPI2,
|
|
PERIPHC_XIO,
|
|
PERIPHC_SPI3,
|
|
PERIPHC_DVC_I2C,
|
|
|
|
/* 0x30 */
|
|
NONE(DSI),
|
|
PERIPHC_TVO, /* also CVE 0x40 */
|
|
PERIPHC_MIPI,
|
|
PERIPHC_HDMI,
|
|
PERIPHC_CSITE,
|
|
PERIPHC_TVDAC,
|
|
PERIPHC_I2C2,
|
|
PERIPHC_UART3,
|
|
|
|
/* 0x38 */
|
|
NONE(RESERVED56),
|
|
PERIPHC_EMC,
|
|
NONE(USB2),
|
|
NONE(USB3),
|
|
PERIPHC_MPE,
|
|
PERIPHC_VDE,
|
|
NONE(BSEA),
|
|
NONE(BSEV),
|
|
|
|
/* Upper word 95:64 */
|
|
NONE(SPEEDO),
|
|
PERIPHC_UART4,
|
|
PERIPHC_UART5,
|
|
PERIPHC_I2C3,
|
|
PERIPHC_SPI4,
|
|
PERIPHC_SDMMC3,
|
|
NONE(PCIE),
|
|
PERIPHC_OWR,
|
|
|
|
/* 0x48 */
|
|
NONE(AFI),
|
|
NONE(CORESIGHT),
|
|
NONE(PCIEXCLK),
|
|
NONE(AVPUCQ),
|
|
NONE(RESERVED76),
|
|
NONE(RESERVED77),
|
|
NONE(RESERVED78),
|
|
NONE(RESERVED79),
|
|
|
|
/* 0x50 */
|
|
NONE(RESERVED80),
|
|
NONE(RESERVED81),
|
|
NONE(RESERVED82),
|
|
NONE(RESERVED83),
|
|
NONE(IRAMA),
|
|
NONE(IRAMB),
|
|
NONE(IRAMC),
|
|
NONE(IRAMD),
|
|
|
|
/* 0x58 */
|
|
NONE(CRAM2),
|
|
};
|
|
|
|
/*
|
|
* PLL divider shift/mask tables for all PLL IDs.
|
|
*/
|
|
struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = {
|
|
/*
|
|
* T20 and T25
|
|
* NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLX, etc.)
|
|
* If lock_ena or lock_det are >31, they're not used in that PLL.
|
|
*/
|
|
|
|
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x0F,
|
|
.lock_ena = 24, .lock_det = 27, .kcp_shift = 28, .kcp_mask = 3, .kvco_shift = 27, .kvco_mask = 1 }, /* PLLC */
|
|
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 0, .p_mask = 0,
|
|
.lock_ena = 0, .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLM */
|
|
{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
|
|
.lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLP */
|
|
{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
|
|
.lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLA */
|
|
{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x01,
|
|
.lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLU */
|
|
{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
|
|
.lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLD */
|
|
{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x0F,
|
|
.lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 0, .kvco_mask = 0 }, /* PLLX */
|
|
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 0, .p_mask = 0,
|
|
.lock_ena = 9, .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLE */
|
|
{ .m_shift = 0, .m_mask = 0x0F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
|
|
.lock_ena = 18, .lock_det = 0, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLS */
|
|
};
|
|
|
|
/*
|
|
* Get the oscillator frequency, from the corresponding hardware configuration
|
|
* field. T20 has 4 frequencies that it supports.
|
|
*/
|
|
enum clock_osc_freq clock_get_osc_freq(void)
|
|
{
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
u32 reg;
|
|
|
|
reg = readl(&clkrst->crc_osc_ctrl);
|
|
return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
|
|
}
|
|
|
|
/* Returns a pointer to the clock source register for a peripheral */
|
|
u32 *get_periph_source_reg(enum periph_id periph_id)
|
|
{
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
enum periphc_internal_id internal_id;
|
|
|
|
assert(clock_periph_id_isvalid(periph_id));
|
|
internal_id = periph_id_to_internal_id[periph_id];
|
|
assert(internal_id != -1);
|
|
return &clkrst->crc_clk_src[internal_id];
|
|
}
|
|
|
|
int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
|
|
int *divider_bits, int *type)
|
|
{
|
|
enum periphc_internal_id internal_id;
|
|
|
|
if (!clock_periph_id_isvalid(periph_id))
|
|
return -1;
|
|
|
|
internal_id = periph_id_to_internal_id[periph_id];
|
|
if (!periphc_internal_id_isvalid(internal_id))
|
|
return -1;
|
|
|
|
*type = clock_periph_type[internal_id];
|
|
if (!clock_type_id_isvalid(*type))
|
|
return -1;
|
|
|
|
/*
|
|
* Special cases here for the clock with a 4-bit source mux and I2C
|
|
* with its 16-bit divisor
|
|
*/
|
|
if (*type == CLOCK_TYPE_PCXTS)
|
|
*mux_bits = MASK_BITS_31_28;
|
|
else
|
|
*mux_bits = MASK_BITS_31_30;
|
|
if (*type == CLOCK_TYPE_PCMT16)
|
|
*divider_bits = 16;
|
|
else
|
|
*divider_bits = 8;
|
|
|
|
return 0;
|
|
}
|
|
|
|
enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
|
|
{
|
|
enum periphc_internal_id internal_id;
|
|
int type;
|
|
|
|
if (!clock_periph_id_isvalid(periph_id))
|
|
return CLOCK_ID_NONE;
|
|
|
|
internal_id = periph_id_to_internal_id[periph_id];
|
|
if (!periphc_internal_id_isvalid(internal_id))
|
|
return CLOCK_ID_NONE;
|
|
|
|
type = clock_periph_type[internal_id];
|
|
if (!clock_type_id_isvalid(type))
|
|
return CLOCK_ID_NONE;
|
|
|
|
return clock_source[type][source];
|
|
}
|
|
|
|
/**
|
|
* Given a peripheral ID and the required source clock, this returns which
|
|
* value should be programmed into the source mux for that peripheral.
|
|
*
|
|
* There is special code here to handle the one source type with 5 sources.
|
|
*
|
|
* @param periph_id peripheral to start
|
|
* @param source PLL id of required parent clock
|
|
* @param mux_bits Set to number of bits in mux register: 2 or 4
|
|
* @param divider_bits Set to number of divider bits (8 or 16)
|
|
* @return mux value (0-4, or -1 if not found)
|
|
*/
|
|
int get_periph_clock_source(enum periph_id periph_id,
|
|
enum clock_id parent, int *mux_bits, int *divider_bits)
|
|
{
|
|
enum clock_type_id type;
|
|
int mux, err;
|
|
|
|
err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
|
|
assert(!err);
|
|
|
|
for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
|
|
if (clock_source[type][mux] == parent)
|
|
return mux;
|
|
|
|
/*
|
|
* Not found: it might be looking for the 'S' in CLOCK_TYPE_PCXTS
|
|
* which is not in our table. If not, then they are asking for a
|
|
* source which this peripheral can't access through its mux.
|
|
*/
|
|
assert(type == CLOCK_TYPE_PCXTS);
|
|
assert(parent == CLOCK_ID_SFROM32KHZ);
|
|
if (type == CLOCK_TYPE_PCXTS && parent == CLOCK_ID_SFROM32KHZ)
|
|
return 4; /* mux value for this clock */
|
|
|
|
/* if we get here, either us or the caller has made a mistake */
|
|
printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
|
|
parent);
|
|
return -1;
|
|
}
|
|
|
|
void clock_set_enable(enum periph_id periph_id, int enable)
|
|
{
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
u32 *clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
|
|
u32 reg;
|
|
|
|
/* Enable/disable the clock to this peripheral */
|
|
assert(clock_periph_id_isvalid(periph_id));
|
|
reg = readl(clk);
|
|
if (enable)
|
|
reg |= PERIPH_MASK(periph_id);
|
|
else
|
|
reg &= ~PERIPH_MASK(periph_id);
|
|
writel(reg, clk);
|
|
}
|
|
|
|
void reset_set_enable(enum periph_id periph_id, int enable)
|
|
{
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
u32 *reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
|
|
u32 reg;
|
|
|
|
/* Enable/disable reset to the peripheral */
|
|
assert(clock_periph_id_isvalid(periph_id));
|
|
reg = readl(reset);
|
|
if (enable)
|
|
reg |= PERIPH_MASK(periph_id);
|
|
else
|
|
reg &= ~PERIPH_MASK(periph_id);
|
|
writel(reg, reset);
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
/*
|
|
* Convert a device tree clock ID to our peripheral ID. They are mostly
|
|
* the same but we are very cautious so we check that a valid clock ID is
|
|
* provided.
|
|
*
|
|
* @param clk_id Clock ID according to tegra20 device tree binding
|
|
* @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
|
|
*/
|
|
enum periph_id clk_id_to_periph_id(int clk_id)
|
|
{
|
|
if (clk_id > PERIPH_ID_COUNT)
|
|
return PERIPH_ID_NONE;
|
|
|
|
switch (clk_id) {
|
|
case PERIPH_ID_RESERVED1:
|
|
case PERIPH_ID_RESERVED2:
|
|
case PERIPH_ID_RESERVED30:
|
|
case PERIPH_ID_RESERVED35:
|
|
case PERIPH_ID_RESERVED56:
|
|
case PERIPH_ID_PCIEXCLK:
|
|
case PERIPH_ID_RESERVED76:
|
|
case PERIPH_ID_RESERVED77:
|
|
case PERIPH_ID_RESERVED78:
|
|
case PERIPH_ID_RESERVED79:
|
|
case PERIPH_ID_RESERVED80:
|
|
case PERIPH_ID_RESERVED81:
|
|
case PERIPH_ID_RESERVED82:
|
|
case PERIPH_ID_RESERVED83:
|
|
case PERIPH_ID_RESERVED91:
|
|
return PERIPH_ID_NONE;
|
|
default:
|
|
return clk_id;
|
|
}
|
|
}
|
|
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
|
|
|
|
void clock_early_init(void)
|
|
{
|
|
/*
|
|
* PLLP output frequency set to 216MHz
|
|
* PLLC output frequency set to 600Mhz
|
|
*
|
|
* TODO: Can we calculate these values instead of hard-coding?
|
|
*/
|
|
switch (clock_get_osc_freq()) {
|
|
case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
|
|
clock_set_rate(CLOCK_ID_PERIPH, 432, 12, 1, 8);
|
|
clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
|
|
break;
|
|
|
|
case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
|
|
clock_set_rate(CLOCK_ID_PERIPH, 432, 26, 1, 8);
|
|
clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
|
|
break;
|
|
|
|
case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
|
|
clock_set_rate(CLOCK_ID_PERIPH, 432, 13, 1, 8);
|
|
clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
|
|
break;
|
|
case CLOCK_OSC_FREQ_19_2:
|
|
default:
|
|
/*
|
|
* These are not supported. It is too early to print a
|
|
* message and the UART likely won't work anyway due to the
|
|
* oscillator being wrong.
|
|
*/
|
|
break;
|
|
}
|
|
}
|
|
|
|
void arch_timer_init(void)
|
|
{
|
|
}
|
|
|
|
#define PMC_SATA_PWRGT 0x1ac
|
|
#define PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE (1 << 5)
|
|
#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL (1 << 4)
|
|
|
|
#define PLLE_SS_CNTL 0x68
|
|
#define PLLE_SS_CNTL_SSCINCINTRV(x) (((x) & 0x3f) << 24)
|
|
#define PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16)
|
|
#define PLLE_SS_CNTL_SSCBYP (1 << 12)
|
|
#define PLLE_SS_CNTL_INTERP_RESET (1 << 11)
|
|
#define PLLE_SS_CNTL_BYPASS_SS (1 << 10)
|
|
#define PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0)
|
|
|
|
#define PLLE_BASE 0x0e8
|
|
#define PLLE_BASE_ENABLE_CML (1 << 31)
|
|
#define PLLE_BASE_ENABLE (1 << 30)
|
|
#define PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24)
|
|
#define PLLE_BASE_PLDIV(x) (((x) & 0x3f) << 16)
|
|
#define PLLE_BASE_NDIV(x) (((x) & 0xff) << 8)
|
|
#define PLLE_BASE_MDIV(x) (((x) & 0xff) << 0)
|
|
|
|
#define PLLE_MISC 0x0ec
|
|
#define PLLE_MISC_SETUP_BASE(x) (((x) & 0xffff) << 16)
|
|
#define PLLE_MISC_PLL_READY (1 << 15)
|
|
#define PLLE_MISC_LOCK (1 << 11)
|
|
#define PLLE_MISC_LOCK_ENABLE (1 << 9)
|
|
#define PLLE_MISC_SETUP_EXT(x) (((x) & 0x3) << 2)
|
|
|
|
static int tegra_plle_train(void)
|
|
{
|
|
unsigned int timeout = 2000;
|
|
unsigned long value;
|
|
|
|
value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
|
|
value |= PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE;
|
|
writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
|
|
|
|
value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
|
|
value |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL;
|
|
writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
|
|
|
|
value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
|
|
value &= ~PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE;
|
|
writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
|
|
|
|
do {
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
if (value & PLLE_MISC_PLL_READY)
|
|
break;
|
|
|
|
udelay(100);
|
|
} while (--timeout);
|
|
|
|
if (timeout == 0) {
|
|
pr_err("timeout waiting for PLLE to become ready");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tegra_plle_enable(void)
|
|
{
|
|
unsigned int timeout = 1000;
|
|
u32 value;
|
|
int err;
|
|
|
|
/* disable PLLE clock */
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
|
|
value &= ~PLLE_BASE_ENABLE_CML;
|
|
value &= ~PLLE_BASE_ENABLE;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
|
|
|
|
/* clear lock enable and setup field */
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
value &= ~PLLE_MISC_LOCK_ENABLE;
|
|
value &= ~PLLE_MISC_SETUP_BASE(0xffff);
|
|
value &= ~PLLE_MISC_SETUP_EXT(0x3);
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
if ((value & PLLE_MISC_PLL_READY) == 0) {
|
|
err = tegra_plle_train();
|
|
if (err < 0) {
|
|
pr_err("failed to train PLLE: %d", err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
value |= PLLE_MISC_SETUP_BASE(0x7);
|
|
value |= PLLE_MISC_LOCK_ENABLE;
|
|
value |= PLLE_MISC_SETUP_EXT(0);
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
|
|
value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET |
|
|
PLLE_SS_CNTL_BYPASS_SS;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
|
|
value |= PLLE_BASE_ENABLE_CML | PLLE_BASE_ENABLE;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
|
|
|
|
do {
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
if (value & PLLE_MISC_LOCK)
|
|
break;
|
|
|
|
udelay(2);
|
|
} while (--timeout);
|
|
|
|
if (timeout == 0) {
|
|
pr_err("timeout waiting for PLLE to lock");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
udelay(50);
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
|
|
value &= ~PLLE_SS_CNTL_SSCINCINTRV(0x3f);
|
|
value |= PLLE_SS_CNTL_SSCINCINTRV(0x18);
|
|
|
|
value &= ~PLLE_SS_CNTL_SSCINC(0xff);
|
|
value |= PLLE_SS_CNTL_SSCINC(0x01);
|
|
|
|
value &= ~PLLE_SS_CNTL_SSCBYP;
|
|
value &= ~PLLE_SS_CNTL_INTERP_RESET;
|
|
value &= ~PLLE_SS_CNTL_BYPASS_SS;
|
|
|
|
value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff);
|
|
value |= PLLE_SS_CNTL_SSCMAX(0x24);
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct periph_clk_init periph_clk_init_table[] = {
|
|
{ PERIPH_ID_SPI1, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SBC1, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SBC2, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SBC3, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SBC4, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_HOST1X, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_DISP1, CLOCK_ID_CGENERAL },
|
|
{ PERIPH_ID_NDFLASH, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ },
|
|
{ PERIPH_ID_DVC_I2C, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_I2C1, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_I2C2, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_I2C3, CLOCK_ID_PERIPH },
|
|
{ -1, },
|
|
};
|