u-boot/arch/arm/mach-tegra/tegra210/Kconfig
Tom Warren 7c02bc9649 ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
The Jetson Nano Developer Kit is a Tegra X1-based development board. It
is similar to Jetson TX1 but it is not pin compatible. It features 4GB
of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot
used for storage.

HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0
and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI
Ethernet controller provides onboard network connectivity. NVMe support
has also been added. Env save is at the end of QSPI (4MB-8K).

A 40-pin header on the board can be used to extend the capabilities and
exposed interfaces of the Jetson Nano.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-04-02 14:30:02 -07:00

55 lines
1.6 KiB
Text

if TEGRA210
choice
prompt "Tegra210 board select"
config TARGET_E2220_1170
bool "NVIDIA Tegra210 E2220-1170 board"
select BOARD_LATE_INIT
help
E2220-1170 is a Tegra210 bringup board with onboard SoC, DRAM,
eMMC, SD card slot, HDMI, USB micro-B port, and sockets for various
expansion modules.
config TARGET_P2371_0000
bool "NVIDIA Tegra210 P2371-0000 board"
select BOARD_LATE_INIT
help
P2371-0000 is a P2581 or P2530 CPU board married to a P2595 I/O
board. The combination contains SoC, DRAM, eMMC, SD card slot,
HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA,
a GPIO expansion header, and an analog audio jack.
config TARGET_P2371_2180
bool "NVIDIA Tegra210 P2371-2180 (Jetson TX1) board"
select BOARD_LATE_INIT
help
P2371-2180 (Jetson TX1 developer kit) is a P2180 CPU board married
to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD
card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host
port, SATA, PCIe, and two GPIO expansion headers.
config TARGET_P2571
bool "NVIDIA Tegra210 P2571 base board"
select BOARD_LATE_INIT
help
P2571 is a P2530 married to a P1963 I/O board
config TARGET_P3450_0000
bool "NVIDIA Jetson Nano Developer Kit"
select BOARD_LATE_INIT
help
P3450-0000 is a P3448 CPU board married to a P3449 I/O board.
endchoice
config SYS_SOC
default "tegra210"
source "board/nvidia/e2220-1170/Kconfig"
source "board/nvidia/p2371-0000/Kconfig"
source "board/nvidia/p2371-2180/Kconfig"
source "board/nvidia/p2571/Kconfig"
source "board/nvidia/p3450-0000/Kconfig"
endif