mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
359 lines
8.8 KiB
C
359 lines
8.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2010-2012 Freescale Semiconductor, Inc.
|
|
* Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
|
|
* Timur Tabi <timur@freescale.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/io.h>
|
|
#include <linux/libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_mdio.h>
|
|
#include <tsec.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <netdev.h>
|
|
#include <i2c.h>
|
|
#include <hwconfig.h>
|
|
|
|
#include "../common/ngpixis.h"
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
|
|
|
|
/* Set pmuxcr to allow both i2c1 and i2c2 */
|
|
setbits_be32(&gur->pmuxcr, 0x1000);
|
|
#ifdef CONFIG_SYS_RAMBOOT
|
|
setbits_be32(&gur->pmuxcr,
|
|
in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
|
|
#endif
|
|
|
|
/* Read back the register to synchronize the write. */
|
|
in_be32(&gur->pmuxcr);
|
|
|
|
/* Set the pin muxing to enable ETSEC2. */
|
|
clrbits_be32(&gur->pmuxcr2, 0x001F8000);
|
|
|
|
/* Enable the SPI */
|
|
clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
u8 sw;
|
|
|
|
printf("Board: P1022DS Sys ID: 0x%02x, "
|
|
"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
|
|
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
|
|
|
|
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
|
|
|
|
switch ((sw & PIXIS_LBMAP_MASK) >> 6) {
|
|
case 0:
|
|
printf ("vBank: %u\n", ((sw & 0x30) >> 4));
|
|
break;
|
|
case 1:
|
|
printf ("NAND\n");
|
|
break;
|
|
case 2:
|
|
case 3:
|
|
puts ("Promjet\n");
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define CONFIG_TFP410_I2C_ADDR 0x38
|
|
|
|
/* Masks for the SSI_TDM and AUDCLK bits of the ngPIXIS BRDCFG1 register. */
|
|
#define CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK 0x0c
|
|
#define CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK 0x03
|
|
|
|
/* Route the I2C1 pins to the SSI port instead. */
|
|
#define CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI 0x08
|
|
|
|
/* Choose the 12.288Mhz codec reference clock */
|
|
#define CONFIG_PIXIS_BRDCFG1_AUDCLK_12 0x02
|
|
|
|
/* Choose the 11.2896Mhz codec reference clock */
|
|
#define CONFIG_PIXIS_BRDCFG1_AUDCLK_11 0x01
|
|
|
|
/* Connect to USB2 */
|
|
#define CONFIG_PIXIS_BRDCFG0_USB2 0x10
|
|
/* Connect to TFM bus */
|
|
#define CONFIG_PIXIS_BRDCFG1_TDM 0x0c
|
|
/* Connect to SPI */
|
|
#define CONFIG_PIXIS_BRDCFG0_SPI 0x80
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
u8 temp;
|
|
const char *audclk;
|
|
size_t arglen;
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
/* For DVI, enable the TFP410 Encoder. */
|
|
|
|
temp = 0xBF;
|
|
if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0)
|
|
return -1;
|
|
if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0)
|
|
return -1;
|
|
debug("DVI Encoder Read: 0x%02x\n", temp);
|
|
|
|
temp = 0x10;
|
|
if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0)
|
|
return -1;
|
|
if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0)
|
|
return -1;
|
|
debug("DVI Encoder Read: 0x%02x\n",temp);
|
|
|
|
/* Enable the USB2 in PMUXCR2 and FGPA */
|
|
if (hwconfig("usb2")) {
|
|
clrsetbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_ETSECUSB_MASK,
|
|
MPC85xx_PMUXCR2_USB);
|
|
setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_USB2);
|
|
}
|
|
|
|
/* tdm and audio can not enable simultaneous*/
|
|
if (hwconfig("tdm") && hwconfig("audclk")){
|
|
printf("WARNING: TDM and AUDIO can not be enabled simultaneous !\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Enable the TDM in PMUXCR and FGPA */
|
|
if (hwconfig("tdm")) {
|
|
clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TDM_MASK,
|
|
MPC85xx_PMUXCR_TDM);
|
|
setbits_8(&pixis->brdcfg1, CONFIG_PIXIS_BRDCFG1_TDM);
|
|
/* TDM need some configration option by SPI */
|
|
clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SPI_MASK,
|
|
MPC85xx_PMUXCR_SPI);
|
|
setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_SPI);
|
|
}
|
|
|
|
/*
|
|
* Enable the reference clock for the WM8776 codec, and route the MUX
|
|
* pins for SSI. The default is the 12.288 MHz clock
|
|
*/
|
|
|
|
if (hwconfig("audclk")) {
|
|
temp = in_8(&pixis->brdcfg1) & ~(CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK |
|
|
CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK);
|
|
temp |= CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI;
|
|
|
|
audclk = hwconfig_arg("audclk", &arglen);
|
|
/* Check the first two chars only */
|
|
if (audclk && (strncmp(audclk, "11", 2) == 0))
|
|
temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_11;
|
|
else
|
|
temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_12;
|
|
setbits_8(&pixis->brdcfg1, temp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* A list of PCI and SATA slots
|
|
*/
|
|
enum slot_id {
|
|
SLOT_PCIE1 = 1,
|
|
SLOT_PCIE2,
|
|
SLOT_PCIE3,
|
|
SLOT_PCIE4,
|
|
SLOT_PCIE5,
|
|
SLOT_SATA1,
|
|
SLOT_SATA2
|
|
};
|
|
|
|
/*
|
|
* This array maps the slot identifiers to their names on the P1022DS board.
|
|
*/
|
|
static const char *slot_names[] = {
|
|
[SLOT_PCIE1] = "Slot 1",
|
|
[SLOT_PCIE2] = "Slot 2",
|
|
[SLOT_PCIE3] = "Slot 3",
|
|
[SLOT_PCIE4] = "Slot 4",
|
|
[SLOT_PCIE5] = "Mini-PCIe",
|
|
[SLOT_SATA1] = "SATA 1",
|
|
[SLOT_SATA2] = "SATA 2",
|
|
};
|
|
|
|
/*
|
|
* This array maps a given SERDES configuration and SERDES device to the PCI or
|
|
* SATA slot that it connects to. This mapping is hard-coded in the FPGA.
|
|
*/
|
|
static u8 serdes_dev_slot[][SATA2 + 1] = {
|
|
[0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 },
|
|
[0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
|
|
[0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4,
|
|
[PCIE2] = SLOT_PCIE5 },
|
|
[0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
|
|
[PCIE2] = SLOT_PCIE3,
|
|
[SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
|
|
[0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
|
|
[PCIE2] = SLOT_PCIE3 },
|
|
[0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3,
|
|
[PCIE2] = SLOT_PCIE3,
|
|
[SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
|
|
[0x1c] = { [PCIE1] = SLOT_PCIE1,
|
|
[SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
|
|
[0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 },
|
|
[0x1f] = { [PCIE1] = SLOT_PCIE1 },
|
|
};
|
|
|
|
|
|
/*
|
|
* Returns the name of the slot to which the PCIe or SATA controller is
|
|
* connected
|
|
*/
|
|
const char *board_serdes_name(enum srds_prtcl device)
|
|
{
|
|
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
|
|
u32 pordevsr = in_be32(&gur->pordevsr);
|
|
unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
|
|
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
|
|
enum slot_id slot = serdes_dev_slot[srds_cfg][device];
|
|
const char *name = slot_names[slot];
|
|
|
|
if (name)
|
|
return name;
|
|
else
|
|
return "Nothing";
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
void pci_init_board(void)
|
|
{
|
|
fsl_pcie_init_board(0);
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
int flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash + PROMJET region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
if (flash_esel == -1) {
|
|
/* very unlikely unless something is messed up */
|
|
puts("Error: Could not find TLB for FLASH BASE\n");
|
|
flash_esel = 2; /* give our best effort to continue */
|
|
} else {
|
|
/* invalidate existing TLB entry for flash + promjet */
|
|
disable_tlb(flash_esel);
|
|
}
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
|
0, flash_esel, BOOKE_PAGESZ_256M, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initialize on-board and/or PCI Ethernet devices
|
|
*
|
|
* Returns:
|
|
* <0, error
|
|
* 0, no ethernet devices found
|
|
* >0, number of ethernet devices initialized
|
|
*/
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct fsl_pq_mdio_info mdio_info;
|
|
struct tsec_info_struct tsec_info[2];
|
|
unsigned int num = 0;
|
|
|
|
#ifdef CONFIG_TSEC1
|
|
SET_STD_TSEC_INFO(tsec_info[num], 1);
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC2
|
|
SET_STD_TSEC_INFO(tsec_info[num], 2);
|
|
num++;
|
|
#endif
|
|
|
|
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
|
|
mdio_info.name = DEFAULT_MII_NAME;
|
|
fsl_pq_mdio_init(bis, &mdio_info);
|
|
|
|
return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
/**
|
|
* ft_codec_setup - fix up the clock-frequency property of the codec node
|
|
*
|
|
* Update the clock-frequency property based on the value of the 'audclk'
|
|
* hwconfig option. If audclk is not specified, then don't write anything
|
|
* to the device tree, because it means that the codec clock is disabled.
|
|
*/
|
|
static void ft_codec_setup(void *blob, const char *compatible)
|
|
{
|
|
const char *audclk;
|
|
size_t arglen;
|
|
u32 freq;
|
|
|
|
audclk = hwconfig_arg("audclk", &arglen);
|
|
if (audclk) {
|
|
if (strncmp(audclk, "11", 2) == 0)
|
|
freq = 11289600;
|
|
else
|
|
freq = 12288000;
|
|
|
|
do_fixup_by_compat_u32(blob, compatible, "clock-frequency",
|
|
freq, 1);
|
|
}
|
|
}
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = env_get_bootm_low();
|
|
size = env_get_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#ifdef CONFIG_HAS_FSL_DR_USB
|
|
fsl_fdt_fixup_dr_usb(blob, bd);
|
|
#endif
|
|
|
|
FT_FSL_PCI_SETUP;
|
|
|
|
#ifdef CONFIG_FSL_SGMII_RISER
|
|
fsl_sgmii_riser_fdt_fixup(blob);
|
|
#endif
|
|
|
|
/* Update the WM8776 node's clock frequency property */
|
|
ft_codec_setup(blob, "wlf,wm8776");
|
|
|
|
return 0;
|
|
}
|
|
#endif
|