u-boot/drivers/rtc/rx8025.c
Mathew McBride 701c04f331 rtc: rx8025: revise single register write to use offset
Writing of individual registers was not functioning
correctly as a 0 'offset' byte under DM-managed
I2C was being appended in front of register we
wanted to access.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
2021-10-03 14:40:56 -04:00

264 lines
6.3 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2007
* Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
*/
/*
* Epson RX8025 RTC driver.
*/
#include <common.h>
#include <command.h>
#include <dm.h>
#include <i2c.h>
#include <rtc.h>
/*---------------------------------------------------------------------*/
#undef DEBUG_RTC
#ifdef DEBUG_RTC
#define DEBUGR(fmt,args...) printf(fmt ,##args)
#else
#define DEBUGR(fmt,args...)
#endif
/*---------------------------------------------------------------------*/
enum rx_model {
model_rx_8025,
model_rx_8035,
};
/*
* RTC register addresses
*/
#define RTC_SEC_REG_ADDR 0x00
#define RTC_MIN_REG_ADDR 0x01
#define RTC_HR_REG_ADDR 0x02
#define RTC_DAY_REG_ADDR 0x03
#define RTC_DATE_REG_ADDR 0x04
#define RTC_MON_REG_ADDR 0x05
#define RTC_YR_REG_ADDR 0x06
#define RTC_OFFSET_REG_ADDR 0x07
#define RTC_CTL1_REG_ADDR 0x0e
#define RTC_CTL2_REG_ADDR 0x0f
/*
* Control register 1 bits
*/
#define RTC_CTL1_BIT_2412 0x20
/*
* Control register 2 bits
*/
#define RTC_CTL2_BIT_PON 0x10
#define RTC_CTL2_BIT_VDET 0x40
#define RTC_CTL2_BIT_XST 0x20
#define RTC_CTL2_BIT_VDSL 0x80
/*
* Note: the RX8025 I2C RTC requires register
* reads and write to consist of a single bus
* cycle. It is not allowed to write the register
* address in a first cycle that is terminated by
* a STOP condition. The chips needs a 'restart'
* sequence (start sequence without a prior stop).
*/
#define rtc_read(reg) buf[(reg) & 0xf]
static int rtc_write(struct udevice *dev, uchar reg, uchar val);
static int rx8025_is_osc_stopped(enum rx_model model, int ctrl2)
{
int xstp = ctrl2 & RTC_CTL2_BIT_XST;
/* XSTP bit has different polarity on RX-8025 vs RX-8035.
* RX-8025: 0 == oscillator stopped
* RX-8035: 1 == oscillator stopped
*/
if (model == model_rx_8025)
xstp = !xstp;
return xstp;
}
/*
* Get the current time from the RTC
*/
static int rx8025_rtc_get(struct udevice *dev, struct rtc_time *tmp)
{
int rel = 0;
uchar sec, min, hour, mday, wday, mon, year, ctl2;
uchar buf[16];
if (dm_i2c_read(dev, 0, buf, sizeof(buf))) {
printf("Error reading from RTC\n");
return -EIO;
}
sec = rtc_read(RTC_SEC_REG_ADDR);
min = rtc_read(RTC_MIN_REG_ADDR);
hour = rtc_read(RTC_HR_REG_ADDR);
wday = rtc_read(RTC_DAY_REG_ADDR);
mday = rtc_read(RTC_DATE_REG_ADDR);
mon = rtc_read(RTC_MON_REG_ADDR);
year = rtc_read(RTC_YR_REG_ADDR);
DEBUGR("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
"hr: %02x min: %02x sec: %02x\n",
year, mon, mday, wday, hour, min, sec);
/* dump status */
ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
if (ctl2 & RTC_CTL2_BIT_PON) {
printf("RTC: power-on detected\n");
rel = -1;
}
if (ctl2 & RTC_CTL2_BIT_VDET) {
printf("RTC: voltage drop detected\n");
rel = -1;
}
if (rx8025_is_osc_stopped(dev->driver_data, ctl2)) {
printf("RTC: oscillator stop detected\n");
rel = -1;
}
tmp->tm_sec = bcd2bin(sec & 0x7F);
tmp->tm_min = bcd2bin(min & 0x7F);
if (rtc_read(RTC_CTL1_REG_ADDR) & RTC_CTL1_BIT_2412)
tmp->tm_hour = bcd2bin(hour & 0x3F);
else
tmp->tm_hour = bcd2bin(hour & 0x1F) % 12 +
((hour & 0x20) ? 12 : 0);
tmp->tm_mday = bcd2bin (mday & 0x3F);
tmp->tm_mon = bcd2bin (mon & 0x1F);
tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000);
tmp->tm_wday = bcd2bin (wday & 0x07);
tmp->tm_yday = 0;
tmp->tm_isdst= 0;
DEBUGR("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
return rel;
}
/*
* Set the RTC
*/
static int rx8025_rtc_set(struct udevice *dev, const struct rtc_time *tmp)
{
/* To work around the read/write cycle issue mentioned
* at the top of this file, write all the time registers
* in one I2C transaction
*/
u8 write_op[8];
/* 2412 flag must be set before doing a RTC write,
* otherwise the seconds and minute register
* will be cleared when the flag is set
*/
if (rtc_write(dev, RTC_CTL1_REG_ADDR, RTC_CTL1_BIT_2412))
return -EIO;
DEBUGR("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
printf("WARNING: year should be between 1970 and 2069!\n");
write_op[RTC_SEC_REG_ADDR] = bin2bcd(tmp->tm_sec);
write_op[RTC_MIN_REG_ADDR] = bin2bcd(tmp->tm_min);
write_op[RTC_HR_REG_ADDR] = bin2bcd(tmp->tm_hour);
write_op[RTC_DAY_REG_ADDR] = bin2bcd(tmp->tm_wday);
write_op[RTC_DATE_REG_ADDR] = bin2bcd(tmp->tm_mday);
write_op[RTC_MON_REG_ADDR] = bin2bcd(tmp->tm_mon);
write_op[RTC_YR_REG_ADDR] = bin2bcd(tmp->tm_year % 100);
write_op[RTC_OFFSET_REG_ADDR] = 0;
return dm_i2c_write(dev, 0, &write_op[0], 8);
}
/*
* Reset the RTC
*/
static int rx8025_rtc_reset(struct udevice *dev)
{
uchar buf[16];
uchar ctl2;
if (dm_i2c_read(dev, 0, buf, sizeof(buf))) {
printf("Error reading from RTC\n");
return -EIO;
}
ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
ctl2 &= ~(RTC_CTL2_BIT_PON | RTC_CTL2_BIT_VDET);
if (dev->driver_data == model_rx_8035)
ctl2 &= ~(RTC_CTL2_BIT_XST);
else
ctl2 |= RTC_CTL2_BIT_XST;
return rtc_write(dev, RTC_CTL2_REG_ADDR, ctl2);
}
/*
* Helper functions
*/
static int rtc_write(struct udevice *dev, uchar reg, uchar val)
{
/* The RX8025/RX8035 uses the top 4 bits of the
* 'offset' byte as the start register address,
* and the bottom 4 bits as a 'transfer' mode setting
* (only applicable for reads)
*/
u8 offset = (reg << 4);
if (dm_i2c_reg_write(dev, offset, val)) {
printf("Error writing to RTC\n");
return -EIO;
}
return 0;
}
static int rx8025_probe(struct udevice *dev)
{
uchar buf[16];
int ret = 0;
if (i2c_get_chip_offset_len(dev) != 1)
ret = i2c_set_chip_offset_len(dev, 1);
if (ret)
return ret;
return dm_i2c_read(dev, 0, buf, sizeof(buf));
}
static const struct rtc_ops rx8025_rtc_ops = {
.get = rx8025_rtc_get,
.set = rx8025_rtc_set,
.reset = rx8025_rtc_reset,
};
static const struct udevice_id rx8025_rtc_ids[] = {
{ .compatible = "epson,rx8025", .data = model_rx_8025 },
{ .compatible = "epson,rx8035", .data = model_rx_8035 },
{ }
};
U_BOOT_DRIVER(rx8025_rtc) = {
.name = "rx8025_rtc",
.id = UCLASS_RTC,
.probe = rx8025_probe,
.of_match = rx8025_rtc_ids,
.ops = &rx8025_rtc_ops,
};