mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 06:42:56 +00:00
cdb6babec6
So far interrupt routing works pretty well for any on-chip devices on Intel Crown Bay. When inserting any PCIe card to any PCIe slot, Linux kernel is smart enough to do interrupt swizzling and figure out device's irq using its parent bridge's interrupt routing info all the way up to its root port. In U-Boot all PCIe root ports' interrupts were routed to PIRQ E/F/G/H before, while actually all PCIe downstream ports received INTx are routed to PIRQ A/B/C/D directly and not configurable. Now we change this mapping so that any external PCIe device can work correctly. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
91 lines
1.8 KiB
C
91 lines
1.8 KiB
C
/*
|
|
* Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/pci.h>
|
|
#include <asm/post.h>
|
|
#include <asm/arch/device.h>
|
|
#include <asm/arch/tnc.h>
|
|
#include <asm/fsp/fsp_support.h>
|
|
#include <asm/processor.h>
|
|
|
|
static void unprotect_spi_flash(void)
|
|
{
|
|
u32 bc;
|
|
|
|
bc = x86_pci_read_config32(TNC_LPC, 0xd8);
|
|
bc |= 0x1; /* unprotect the flash */
|
|
x86_pci_write_config32(TNC_LPC, 0xd8, bc);
|
|
}
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
struct pci_controller *hose;
|
|
int ret;
|
|
|
|
post_code(POST_CPU_INIT);
|
|
#ifdef CONFIG_SYS_X86_TSC_TIMER
|
|
timer_set_base(rdtsc());
|
|
#endif
|
|
|
|
ret = x86_cpu_init_f();
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pci_early_init_hose(&hose);
|
|
if (ret)
|
|
return ret;
|
|
|
|
unprotect_spi_flash();
|
|
|
|
return 0;
|
|
}
|
|
|
|
void cpu_irq_init(void)
|
|
{
|
|
struct tnc_rcba *rcba;
|
|
u32 base;
|
|
|
|
base = x86_pci_read_config32(TNC_LPC, LPC_RCBA);
|
|
base &= ~MEM_BAR_EN;
|
|
rcba = (struct tnc_rcba *)base;
|
|
|
|
/* Make sure all internal PCI devices are using INTA */
|
|
writel(INTA, &rcba->d02ip);
|
|
writel(INTA, &rcba->d03ip);
|
|
writel(INTA, &rcba->d27ip);
|
|
writel(INTA, &rcba->d31ip);
|
|
writel(INTA, &rcba->d23ip);
|
|
writel(INTA, &rcba->d24ip);
|
|
writel(INTA, &rcba->d25ip);
|
|
writel(INTA, &rcba->d26ip);
|
|
|
|
/*
|
|
* Route TunnelCreek PCI device interrupt pin to PIRQ
|
|
*
|
|
* Since PCIe downstream ports received INTx are routed to PIRQ
|
|
* A/B/C/D directly and not configurable, we have to route PCIe
|
|
* root ports' INTx to PIRQ A/B/C/D as well. For other devices
|
|
* on TunneCreek, route them to PIRQ E/F/G/H.
|
|
*/
|
|
writew(PIRQE, &rcba->d02ir);
|
|
writew(PIRQF, &rcba->d03ir);
|
|
writew(PIRQG, &rcba->d27ir);
|
|
writew(PIRQH, &rcba->d31ir);
|
|
writew(PIRQA, &rcba->d23ir);
|
|
writew(PIRQB, &rcba->d24ir);
|
|
writew(PIRQC, &rcba->d25ir);
|
|
writew(PIRQD, &rcba->d26ir);
|
|
}
|
|
|
|
int arch_misc_init(void)
|
|
{
|
|
pirq_init();
|
|
|
|
return 0;
|
|
}
|