mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
f12341a952
SDHCI HISPD bits need to be configured based on desired mmc timings mode and some HISPD quirks. So, handle the HISPD bit based on the mmc computed selected mode(timing parameter) rather than fixed mmc card clock frequency. Linux handle the HISPD similar like this in below commit but no SDHCI_QUIRK_BROKEN_HISPD_MODE, commit <501639bf2173> ("mmc: sdhci: fix SDHCI_QUIRK_NO_HISPD_BIT handling") This eventually fixed the mmc write issue observed in rk3399 sdhci controller. Bug log for refernece, => gpt write mmc 0 $partitions Writing GPT: mmc write failed ** Can't write to device 0 ** ** Can't write to device 0 ** error! Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Peng Fan <peng.fan@nxp.com> Peng Fan: added back "ctrl &= ~SDHCI_CTRL_HISPD;" per Jaehoon's suggestion Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> # roc-rk3399-pc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
912 lines
23 KiB
C
912 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2011, Marvell Semiconductor Inc.
|
|
* Lei Wen <leiwen@marvell.com>
|
|
*
|
|
* Back ported to the 8xx platform (from the 8260 platform) by
|
|
* Murray.Jensen@cmst.csiro.au, 27-Jan-01.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <mmc.h>
|
|
#include <sdhci.h>
|
|
#include <dm.h>
|
|
#include <asm/cache.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <phys2bus.h>
|
|
|
|
static void sdhci_reset(struct sdhci_host *host, u8 mask)
|
|
{
|
|
unsigned long timeout;
|
|
|
|
/* Wait max 100 ms */
|
|
timeout = 100;
|
|
sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
|
|
while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
|
|
if (timeout == 0) {
|
|
printf("%s: Reset 0x%x never completed.\n",
|
|
__func__, (int)mask);
|
|
return;
|
|
}
|
|
timeout--;
|
|
udelay(1000);
|
|
}
|
|
}
|
|
|
|
static void sdhci_cmd_done(struct sdhci_host *host, struct mmc_cmd *cmd)
|
|
{
|
|
int i;
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
/* CRC is stripped so we need to do some shifting. */
|
|
for (i = 0; i < 4; i++) {
|
|
cmd->response[i] = sdhci_readl(host,
|
|
SDHCI_RESPONSE + (3-i)*4) << 8;
|
|
if (i != 3)
|
|
cmd->response[i] |= sdhci_readb(host,
|
|
SDHCI_RESPONSE + (3-i)*4-1);
|
|
}
|
|
} else {
|
|
cmd->response[0] = sdhci_readl(host, SDHCI_RESPONSE);
|
|
}
|
|
}
|
|
|
|
static void sdhci_transfer_pio(struct sdhci_host *host, struct mmc_data *data)
|
|
{
|
|
int i;
|
|
char *offs;
|
|
for (i = 0; i < data->blocksize; i += 4) {
|
|
offs = data->dest + i;
|
|
if (data->flags == MMC_DATA_READ)
|
|
*(u32 *)offs = sdhci_readl(host, SDHCI_BUFFER);
|
|
else
|
|
sdhci_writel(host, *(u32 *)offs, SDHCI_BUFFER);
|
|
}
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
|
|
static void sdhci_adma_desc(struct sdhci_host *host, dma_addr_t dma_addr,
|
|
u16 len, bool end)
|
|
{
|
|
struct sdhci_adma_desc *desc;
|
|
u8 attr;
|
|
|
|
desc = &host->adma_desc_table[host->desc_slot];
|
|
|
|
attr = ADMA_DESC_ATTR_VALID | ADMA_DESC_TRANSFER_DATA;
|
|
if (!end)
|
|
host->desc_slot++;
|
|
else
|
|
attr |= ADMA_DESC_ATTR_END;
|
|
|
|
desc->attr = attr;
|
|
desc->len = len;
|
|
desc->reserved = 0;
|
|
desc->addr_lo = lower_32_bits(dma_addr);
|
|
#ifdef CONFIG_DMA_ADDR_T_64BIT
|
|
desc->addr_hi = upper_32_bits(dma_addr);
|
|
#endif
|
|
}
|
|
|
|
static void sdhci_prepare_adma_table(struct sdhci_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
uint trans_bytes = data->blocksize * data->blocks;
|
|
uint desc_count = DIV_ROUND_UP(trans_bytes, ADMA_MAX_LEN);
|
|
int i = desc_count;
|
|
dma_addr_t dma_addr = host->start_addr;
|
|
|
|
host->desc_slot = 0;
|
|
|
|
while (--i) {
|
|
sdhci_adma_desc(host, dma_addr, ADMA_MAX_LEN, false);
|
|
dma_addr += ADMA_MAX_LEN;
|
|
trans_bytes -= ADMA_MAX_LEN;
|
|
}
|
|
|
|
sdhci_adma_desc(host, dma_addr, trans_bytes, true);
|
|
|
|
flush_cache((dma_addr_t)host->adma_desc_table,
|
|
ROUND(desc_count * sizeof(struct sdhci_adma_desc),
|
|
ARCH_DMA_MINALIGN));
|
|
}
|
|
#elif defined(CONFIG_MMC_SDHCI_SDMA)
|
|
static void sdhci_prepare_adma_table(struct sdhci_host *host,
|
|
struct mmc_data *data)
|
|
{}
|
|
#endif
|
|
#if (defined(CONFIG_MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA))
|
|
static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data,
|
|
int *is_aligned, int trans_bytes)
|
|
{
|
|
unsigned char ctrl;
|
|
void *buf;
|
|
|
|
if (data->flags == MMC_DATA_READ)
|
|
buf = data->dest;
|
|
else
|
|
buf = (void *)data->src;
|
|
|
|
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
|
|
ctrl &= ~SDHCI_CTRL_DMA_MASK;
|
|
if (host->flags & USE_ADMA64)
|
|
ctrl |= SDHCI_CTRL_ADMA64;
|
|
else if (host->flags & USE_ADMA)
|
|
ctrl |= SDHCI_CTRL_ADMA32;
|
|
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
|
|
|
|
if (host->flags & USE_SDMA &&
|
|
(host->force_align_buffer ||
|
|
(host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR &&
|
|
((unsigned long)buf & 0x7) != 0x0))) {
|
|
*is_aligned = 0;
|
|
if (data->flags != MMC_DATA_READ)
|
|
memcpy(host->align_buffer, buf, trans_bytes);
|
|
buf = host->align_buffer;
|
|
}
|
|
|
|
host->start_addr = dma_map_single(buf, trans_bytes,
|
|
mmc_get_dma_dir(data));
|
|
|
|
if (host->flags & USE_SDMA) {
|
|
sdhci_writel(host, phys_to_bus((ulong)host->start_addr),
|
|
SDHCI_DMA_ADDRESS);
|
|
} else if (host->flags & (USE_ADMA | USE_ADMA64)) {
|
|
sdhci_prepare_adma_table(host, data);
|
|
|
|
sdhci_writel(host, lower_32_bits(host->adma_addr),
|
|
SDHCI_ADMA_ADDRESS);
|
|
if (host->flags & USE_ADMA64)
|
|
sdhci_writel(host, upper_32_bits(host->adma_addr),
|
|
SDHCI_ADMA_ADDRESS_HI);
|
|
}
|
|
}
|
|
#else
|
|
static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data,
|
|
int *is_aligned, int trans_bytes)
|
|
{}
|
|
#endif
|
|
static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data)
|
|
{
|
|
dma_addr_t start_addr = host->start_addr;
|
|
unsigned int stat, rdy, mask, timeout, block = 0;
|
|
bool transfer_done = false;
|
|
|
|
timeout = 1000000;
|
|
rdy = SDHCI_INT_SPACE_AVAIL | SDHCI_INT_DATA_AVAIL;
|
|
mask = SDHCI_DATA_AVAILABLE | SDHCI_SPACE_AVAILABLE;
|
|
do {
|
|
stat = sdhci_readl(host, SDHCI_INT_STATUS);
|
|
if (stat & SDHCI_INT_ERROR) {
|
|
pr_debug("%s: Error detected in status(0x%X)!\n",
|
|
__func__, stat);
|
|
return -EIO;
|
|
}
|
|
if (!transfer_done && (stat & rdy)) {
|
|
if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & mask))
|
|
continue;
|
|
sdhci_writel(host, rdy, SDHCI_INT_STATUS);
|
|
sdhci_transfer_pio(host, data);
|
|
data->dest += data->blocksize;
|
|
if (++block >= data->blocks) {
|
|
/* Keep looping until the SDHCI_INT_DATA_END is
|
|
* cleared, even if we finished sending all the
|
|
* blocks.
|
|
*/
|
|
transfer_done = true;
|
|
continue;
|
|
}
|
|
}
|
|
if ((host->flags & USE_DMA) && !transfer_done &&
|
|
(stat & SDHCI_INT_DMA_END)) {
|
|
sdhci_writel(host, SDHCI_INT_DMA_END, SDHCI_INT_STATUS);
|
|
if (host->flags & USE_SDMA) {
|
|
start_addr &=
|
|
~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1);
|
|
start_addr += SDHCI_DEFAULT_BOUNDARY_SIZE;
|
|
sdhci_writel(host, phys_to_bus((ulong)start_addr),
|
|
SDHCI_DMA_ADDRESS);
|
|
}
|
|
}
|
|
if (timeout-- > 0)
|
|
udelay(10);
|
|
else {
|
|
printf("%s: Transfer data timeout\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
} while (!(stat & SDHCI_INT_DATA_END));
|
|
|
|
dma_unmap_single(host->start_addr, data->blocks * data->blocksize,
|
|
mmc_get_dma_dir(data));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* No command will be sent by driver if card is busy, so driver must wait
|
|
* for card ready state.
|
|
* Every time when card is busy after timeout then (last) timeout value will be
|
|
* increased twice but only if it doesn't exceed global defined maximum.
|
|
* Each function call will use last timeout value.
|
|
*/
|
|
#define SDHCI_CMD_MAX_TIMEOUT 3200
|
|
#define SDHCI_CMD_DEFAULT_TIMEOUT 100
|
|
#define SDHCI_READ_STATUS_TIMEOUT 1000
|
|
|
|
#ifdef CONFIG_DM_MMC
|
|
static int sdhci_send_command(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
|
|
#else
|
|
static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
#endif
|
|
struct sdhci_host *host = mmc->priv;
|
|
unsigned int stat = 0;
|
|
int ret = 0;
|
|
int trans_bytes = 0, is_aligned = 1;
|
|
u32 mask, flags, mode;
|
|
unsigned int time = 0;
|
|
int mmc_dev = mmc_get_blk_desc(mmc)->devnum;
|
|
ulong start = get_timer(0);
|
|
|
|
host->start_addr = 0;
|
|
/* Timeout unit - ms */
|
|
static unsigned int cmd_timeout = SDHCI_CMD_DEFAULT_TIMEOUT;
|
|
|
|
mask = SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT;
|
|
|
|
/* We shouldn't wait for data inihibit for stop commands, even
|
|
though they might use busy signaling */
|
|
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION ||
|
|
((cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
|
|
cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) && !data))
|
|
mask &= ~SDHCI_DATA_INHIBIT;
|
|
|
|
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
|
|
if (time >= cmd_timeout) {
|
|
printf("%s: MMC: %d busy ", __func__, mmc_dev);
|
|
if (2 * cmd_timeout <= SDHCI_CMD_MAX_TIMEOUT) {
|
|
cmd_timeout += cmd_timeout;
|
|
printf("timeout increasing to: %u ms.\n",
|
|
cmd_timeout);
|
|
} else {
|
|
puts("timeout.\n");
|
|
return -ECOMM;
|
|
}
|
|
}
|
|
time++;
|
|
udelay(1000);
|
|
}
|
|
|
|
sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
|
|
|
|
mask = SDHCI_INT_RESPONSE;
|
|
if ((cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
|
|
cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) && !data)
|
|
mask = SDHCI_INT_DATA_AVAIL;
|
|
|
|
if (!(cmd->resp_type & MMC_RSP_PRESENT))
|
|
flags = SDHCI_CMD_RESP_NONE;
|
|
else if (cmd->resp_type & MMC_RSP_136)
|
|
flags = SDHCI_CMD_RESP_LONG;
|
|
else if (cmd->resp_type & MMC_RSP_BUSY) {
|
|
flags = SDHCI_CMD_RESP_SHORT_BUSY;
|
|
if (data)
|
|
mask |= SDHCI_INT_DATA_END;
|
|
} else
|
|
flags = SDHCI_CMD_RESP_SHORT;
|
|
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
flags |= SDHCI_CMD_CRC;
|
|
if (cmd->resp_type & MMC_RSP_OPCODE)
|
|
flags |= SDHCI_CMD_INDEX;
|
|
if (data || cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
|
|
cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)
|
|
flags |= SDHCI_CMD_DATA;
|
|
|
|
/* Set Transfer mode regarding to data flag */
|
|
if (data) {
|
|
sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
|
|
mode = SDHCI_TRNS_BLK_CNT_EN;
|
|
trans_bytes = data->blocks * data->blocksize;
|
|
if (data->blocks > 1)
|
|
mode |= SDHCI_TRNS_MULTI;
|
|
|
|
if (data->flags == MMC_DATA_READ)
|
|
mode |= SDHCI_TRNS_READ;
|
|
|
|
if (host->flags & USE_DMA) {
|
|
mode |= SDHCI_TRNS_DMA;
|
|
sdhci_prepare_dma(host, data, &is_aligned, trans_bytes);
|
|
}
|
|
|
|
sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
|
|
data->blocksize),
|
|
SDHCI_BLOCK_SIZE);
|
|
sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
|
|
sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
|
|
} else if (cmd->resp_type & MMC_RSP_BUSY) {
|
|
sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
|
|
}
|
|
|
|
sdhci_writel(host, cmd->cmdarg, SDHCI_ARGUMENT);
|
|
sdhci_writew(host, SDHCI_MAKE_CMD(cmd->cmdidx, flags), SDHCI_COMMAND);
|
|
start = get_timer(0);
|
|
do {
|
|
stat = sdhci_readl(host, SDHCI_INT_STATUS);
|
|
if (stat & SDHCI_INT_ERROR)
|
|
break;
|
|
|
|
if (get_timer(start) >= SDHCI_READ_STATUS_TIMEOUT) {
|
|
if (host->quirks & SDHCI_QUIRK_BROKEN_R1B) {
|
|
return 0;
|
|
} else {
|
|
printf("%s: Timeout for status update!\n",
|
|
__func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
} while ((stat & mask) != mask);
|
|
|
|
if ((stat & (SDHCI_INT_ERROR | mask)) == mask) {
|
|
sdhci_cmd_done(host, cmd);
|
|
sdhci_writel(host, mask, SDHCI_INT_STATUS);
|
|
} else
|
|
ret = -1;
|
|
|
|
if (!ret && data)
|
|
ret = sdhci_transfer_data(host, data);
|
|
|
|
if (host->quirks & SDHCI_QUIRK_WAIT_SEND_CMD)
|
|
udelay(1000);
|
|
|
|
stat = sdhci_readl(host, SDHCI_INT_STATUS);
|
|
sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
|
|
if (!ret) {
|
|
if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
|
|
!is_aligned && (data->flags == MMC_DATA_READ))
|
|
memcpy(data->dest, host->align_buffer, trans_bytes);
|
|
return 0;
|
|
}
|
|
|
|
sdhci_reset(host, SDHCI_RESET_CMD);
|
|
sdhci_reset(host, SDHCI_RESET_DATA);
|
|
if (stat & SDHCI_INT_TIMEOUT)
|
|
return -ETIMEDOUT;
|
|
else
|
|
return -ECOMM;
|
|
}
|
|
|
|
#if defined(CONFIG_DM_MMC) && defined(MMC_SUPPORTS_TUNING)
|
|
static int sdhci_execute_tuning(struct udevice *dev, uint opcode)
|
|
{
|
|
int err;
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
struct sdhci_host *host = mmc->priv;
|
|
|
|
debug("%s\n", __func__);
|
|
|
|
if (host->ops && host->ops->platform_execute_tuning) {
|
|
err = host->ops->platform_execute_tuning(mmc, opcode);
|
|
if (err)
|
|
return err;
|
|
return 0;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
|
|
{
|
|
struct sdhci_host *host = mmc->priv;
|
|
unsigned int div, clk = 0, timeout;
|
|
|
|
/* Wait max 20 ms */
|
|
timeout = 200;
|
|
while (sdhci_readl(host, SDHCI_PRESENT_STATE) &
|
|
(SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT)) {
|
|
if (timeout == 0) {
|
|
printf("%s: Timeout to wait cmd & data inhibit\n",
|
|
__func__);
|
|
return -EBUSY;
|
|
}
|
|
|
|
timeout--;
|
|
udelay(100);
|
|
}
|
|
|
|
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
|
|
|
|
if (clock == 0)
|
|
return 0;
|
|
|
|
if (host->ops && host->ops->set_delay)
|
|
host->ops->set_delay(host);
|
|
|
|
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
|
|
/*
|
|
* Check if the Host Controller supports Programmable Clock
|
|
* Mode.
|
|
*/
|
|
if (host->clk_mul) {
|
|
for (div = 1; div <= 1024; div++) {
|
|
if ((host->max_clk / div) <= clock)
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Set Programmable Clock Mode in the Clock
|
|
* Control register.
|
|
*/
|
|
clk = SDHCI_PROG_CLOCK_MODE;
|
|
div--;
|
|
} else {
|
|
/* Version 3.00 divisors must be a multiple of 2. */
|
|
if (host->max_clk <= clock) {
|
|
div = 1;
|
|
} else {
|
|
for (div = 2;
|
|
div < SDHCI_MAX_DIV_SPEC_300;
|
|
div += 2) {
|
|
if ((host->max_clk / div) <= clock)
|
|
break;
|
|
}
|
|
}
|
|
div >>= 1;
|
|
}
|
|
} else {
|
|
/* Version 2.00 divisors must be a power of 2. */
|
|
for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) {
|
|
if ((host->max_clk / div) <= clock)
|
|
break;
|
|
}
|
|
div >>= 1;
|
|
}
|
|
|
|
if (host->ops && host->ops->set_clock)
|
|
host->ops->set_clock(host, div);
|
|
|
|
clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
|
|
clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
|
|
<< SDHCI_DIVIDER_HI_SHIFT;
|
|
clk |= SDHCI_CLOCK_INT_EN;
|
|
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
|
|
|
|
/* Wait max 20 ms */
|
|
timeout = 20;
|
|
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
|
|
& SDHCI_CLOCK_INT_STABLE)) {
|
|
if (timeout == 0) {
|
|
printf("%s: Internal clock never stabilised.\n",
|
|
__func__);
|
|
return -EBUSY;
|
|
}
|
|
timeout--;
|
|
udelay(1000);
|
|
}
|
|
|
|
clk |= SDHCI_CLOCK_CARD_EN;
|
|
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
|
|
return 0;
|
|
}
|
|
|
|
static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
|
|
{
|
|
u8 pwr = 0;
|
|
|
|
if (power != (unsigned short)-1) {
|
|
switch (1 << power) {
|
|
case MMC_VDD_165_195:
|
|
pwr = SDHCI_POWER_180;
|
|
break;
|
|
case MMC_VDD_29_30:
|
|
case MMC_VDD_30_31:
|
|
pwr = SDHCI_POWER_300;
|
|
break;
|
|
case MMC_VDD_32_33:
|
|
case MMC_VDD_33_34:
|
|
pwr = SDHCI_POWER_330;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (pwr == 0) {
|
|
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
|
|
return;
|
|
}
|
|
|
|
pwr |= SDHCI_POWER_ON;
|
|
|
|
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
|
|
}
|
|
|
|
void sdhci_set_uhs_timing(struct sdhci_host *host)
|
|
{
|
|
struct mmc *mmc = host->mmc;
|
|
u32 reg;
|
|
|
|
reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
|
reg &= ~SDHCI_CTRL_UHS_MASK;
|
|
|
|
switch (mmc->selected_mode) {
|
|
case UHS_SDR50:
|
|
case MMC_HS_52:
|
|
reg |= SDHCI_CTRL_UHS_SDR50;
|
|
break;
|
|
case UHS_DDR50:
|
|
case MMC_DDR_52:
|
|
reg |= SDHCI_CTRL_UHS_DDR50;
|
|
break;
|
|
case UHS_SDR104:
|
|
case MMC_HS_200:
|
|
reg |= SDHCI_CTRL_UHS_SDR104;
|
|
break;
|
|
default:
|
|
reg |= SDHCI_CTRL_UHS_SDR12;
|
|
}
|
|
|
|
sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
|
|
}
|
|
|
|
#ifdef CONFIG_DM_MMC
|
|
static int sdhci_set_ios(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
#else
|
|
static int sdhci_set_ios(struct mmc *mmc)
|
|
{
|
|
#endif
|
|
u32 ctrl;
|
|
struct sdhci_host *host = mmc->priv;
|
|
bool no_hispd_bit = false;
|
|
|
|
if (host->ops && host->ops->set_control_reg)
|
|
host->ops->set_control_reg(host);
|
|
|
|
if (mmc->clock != host->clock)
|
|
sdhci_set_clock(mmc, mmc->clock);
|
|
|
|
if (mmc->clk_disable)
|
|
sdhci_set_clock(mmc, 0);
|
|
|
|
/* Set bus width */
|
|
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
|
|
if (mmc->bus_width == 8) {
|
|
ctrl &= ~SDHCI_CTRL_4BITBUS;
|
|
if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ||
|
|
(host->quirks & SDHCI_QUIRK_USE_WIDE8))
|
|
ctrl |= SDHCI_CTRL_8BITBUS;
|
|
} else {
|
|
if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ||
|
|
(host->quirks & SDHCI_QUIRK_USE_WIDE8))
|
|
ctrl &= ~SDHCI_CTRL_8BITBUS;
|
|
if (mmc->bus_width == 4)
|
|
ctrl |= SDHCI_CTRL_4BITBUS;
|
|
else
|
|
ctrl &= ~SDHCI_CTRL_4BITBUS;
|
|
}
|
|
|
|
if ((host->quirks & SDHCI_QUIRK_NO_HISPD_BIT) ||
|
|
(host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE)) {
|
|
ctrl &= ~SDHCI_CTRL_HISPD;
|
|
no_hispd_bit = true;
|
|
}
|
|
|
|
if (!no_hispd_bit) {
|
|
if (mmc->selected_mode == MMC_HS ||
|
|
mmc->selected_mode == SD_HS ||
|
|
mmc->selected_mode == MMC_DDR_52 ||
|
|
mmc->selected_mode == MMC_HS_200 ||
|
|
mmc->selected_mode == MMC_HS_400 ||
|
|
mmc->selected_mode == UHS_SDR25 ||
|
|
mmc->selected_mode == UHS_SDR50 ||
|
|
mmc->selected_mode == UHS_SDR104 ||
|
|
mmc->selected_mode == UHS_DDR50)
|
|
ctrl |= SDHCI_CTRL_HISPD;
|
|
else
|
|
ctrl &= ~SDHCI_CTRL_HISPD;
|
|
}
|
|
|
|
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
|
|
|
|
/* If available, call the driver specific "post" set_ios() function */
|
|
if (host->ops && host->ops->set_ios_post)
|
|
return host->ops->set_ios_post(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sdhci_init(struct mmc *mmc)
|
|
{
|
|
struct sdhci_host *host = mmc->priv;
|
|
#if CONFIG_IS_ENABLED(DM_MMC) && CONFIG_IS_ENABLED(DM_GPIO)
|
|
struct udevice *dev = mmc->dev;
|
|
|
|
gpio_request_by_name(dev, "cd-gpios", 0,
|
|
&host->cd_gpio, GPIOD_IS_IN);
|
|
#endif
|
|
|
|
sdhci_reset(host, SDHCI_RESET_ALL);
|
|
|
|
#if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER)
|
|
host->align_buffer = (void *)CONFIG_FIXED_SDHCI_ALIGNED_BUFFER;
|
|
/*
|
|
* Always use this bounce-buffer when CONFIG_FIXED_SDHCI_ALIGNED_BUFFER
|
|
* is defined.
|
|
*/
|
|
host->force_align_buffer = true;
|
|
#else
|
|
if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) {
|
|
host->align_buffer = memalign(8, 512 * 1024);
|
|
if (!host->align_buffer) {
|
|
printf("%s: Aligned buffer alloc failed!!!\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
sdhci_set_power(host, fls(mmc->cfg->voltages) - 1);
|
|
|
|
if (host->ops && host->ops->get_cd)
|
|
host->ops->get_cd(host);
|
|
|
|
/* Enable only interrupts served by the SD controller */
|
|
sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
|
|
SDHCI_INT_ENABLE);
|
|
/* Mask all sdhci interrupt sources */
|
|
sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_MMC
|
|
int sdhci_probe(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
|
|
return sdhci_init(mmc);
|
|
}
|
|
|
|
static int sdhci_deferred_probe(struct udevice *dev)
|
|
{
|
|
int err;
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
struct sdhci_host *host = mmc->priv;
|
|
|
|
if (host->ops && host->ops->deferred_probe) {
|
|
err = host->ops->deferred_probe(host);
|
|
if (err)
|
|
return err;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int sdhci_get_cd(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
struct sdhci_host *host = mmc->priv;
|
|
int value;
|
|
|
|
/* If nonremovable, assume that the card is always present. */
|
|
if (mmc->cfg->host_caps & MMC_CAP_NONREMOVABLE)
|
|
return 1;
|
|
/* If polling, assume that the card is always present. */
|
|
if (mmc->cfg->host_caps & MMC_CAP_NEEDS_POLL)
|
|
return 1;
|
|
|
|
#if CONFIG_IS_ENABLED(DM_GPIO)
|
|
value = dm_gpio_get_value(&host->cd_gpio);
|
|
if (value >= 0) {
|
|
if (mmc->cfg->host_caps & MMC_CAP_CD_ACTIVE_HIGH)
|
|
return !value;
|
|
else
|
|
return value;
|
|
}
|
|
#endif
|
|
value = !!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
|
|
SDHCI_CARD_PRESENT);
|
|
if (mmc->cfg->host_caps & MMC_CAP_CD_ACTIVE_HIGH)
|
|
return !value;
|
|
else
|
|
return value;
|
|
}
|
|
|
|
const struct dm_mmc_ops sdhci_ops = {
|
|
.send_cmd = sdhci_send_command,
|
|
.set_ios = sdhci_set_ios,
|
|
.get_cd = sdhci_get_cd,
|
|
.deferred_probe = sdhci_deferred_probe,
|
|
#ifdef MMC_SUPPORTS_TUNING
|
|
.execute_tuning = sdhci_execute_tuning,
|
|
#endif
|
|
};
|
|
#else
|
|
static const struct mmc_ops sdhci_ops = {
|
|
.send_cmd = sdhci_send_command,
|
|
.set_ios = sdhci_set_ios,
|
|
.init = sdhci_init,
|
|
};
|
|
#endif
|
|
|
|
int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
|
|
u32 f_max, u32 f_min)
|
|
{
|
|
u32 caps, caps_1 = 0;
|
|
#if CONFIG_IS_ENABLED(DM_MMC)
|
|
u64 dt_caps, dt_caps_mask;
|
|
|
|
dt_caps_mask = dev_read_u64_default(host->mmc->dev,
|
|
"sdhci-caps-mask", 0);
|
|
dt_caps = dev_read_u64_default(host->mmc->dev,
|
|
"sdhci-caps", 0);
|
|
caps = ~(u32)dt_caps_mask &
|
|
sdhci_readl(host, SDHCI_CAPABILITIES);
|
|
caps |= (u32)dt_caps;
|
|
#else
|
|
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
|
|
#endif
|
|
debug("%s, caps: 0x%x\n", __func__, caps);
|
|
|
|
#ifdef CONFIG_MMC_SDHCI_SDMA
|
|
if ((caps & SDHCI_CAN_DO_SDMA)) {
|
|
host->flags |= USE_SDMA;
|
|
} else {
|
|
debug("%s: Your controller doesn't support SDMA!!\n",
|
|
__func__);
|
|
}
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
|
|
if (!(caps & SDHCI_CAN_DO_ADMA2)) {
|
|
printf("%s: Your controller doesn't support SDMA!!\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
host->adma_desc_table = memalign(ARCH_DMA_MINALIGN, ADMA_TABLE_SZ);
|
|
|
|
host->adma_addr = (dma_addr_t)host->adma_desc_table;
|
|
#ifdef CONFIG_DMA_ADDR_T_64BIT
|
|
host->flags |= USE_ADMA64;
|
|
#else
|
|
host->flags |= USE_ADMA;
|
|
#endif
|
|
#endif
|
|
if (host->quirks & SDHCI_QUIRK_REG32_RW)
|
|
host->version =
|
|
sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16;
|
|
else
|
|
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
|
|
|
|
cfg->name = host->name;
|
|
#ifndef CONFIG_DM_MMC
|
|
cfg->ops = &sdhci_ops;
|
|
#endif
|
|
|
|
/* Check whether the clock multiplier is supported or not */
|
|
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
|
|
#if CONFIG_IS_ENABLED(DM_MMC)
|
|
caps_1 = ~(u32)(dt_caps_mask >> 32) &
|
|
sdhci_readl(host, SDHCI_CAPABILITIES_1);
|
|
caps_1 |= (u32)(dt_caps >> 32);
|
|
#else
|
|
caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
|
|
#endif
|
|
debug("%s, caps_1: 0x%x\n", __func__, caps_1);
|
|
host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >>
|
|
SDHCI_CLOCK_MUL_SHIFT;
|
|
}
|
|
|
|
if (host->max_clk == 0) {
|
|
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
|
|
host->max_clk = (caps & SDHCI_CLOCK_V3_BASE_MASK) >>
|
|
SDHCI_CLOCK_BASE_SHIFT;
|
|
else
|
|
host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) >>
|
|
SDHCI_CLOCK_BASE_SHIFT;
|
|
host->max_clk *= 1000000;
|
|
if (host->clk_mul)
|
|
host->max_clk *= host->clk_mul;
|
|
}
|
|
if (host->max_clk == 0) {
|
|
printf("%s: Hardware doesn't specify base clock frequency\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
if (f_max && (f_max < host->max_clk))
|
|
cfg->f_max = f_max;
|
|
else
|
|
cfg->f_max = host->max_clk;
|
|
if (f_min)
|
|
cfg->f_min = f_min;
|
|
else {
|
|
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
|
|
cfg->f_min = cfg->f_max / SDHCI_MAX_DIV_SPEC_300;
|
|
else
|
|
cfg->f_min = cfg->f_max / SDHCI_MAX_DIV_SPEC_200;
|
|
}
|
|
cfg->voltages = 0;
|
|
if (caps & SDHCI_CAN_VDD_330)
|
|
cfg->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
if (caps & SDHCI_CAN_VDD_300)
|
|
cfg->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
|
|
if (caps & SDHCI_CAN_VDD_180)
|
|
cfg->voltages |= MMC_VDD_165_195;
|
|
|
|
if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
|
|
cfg->voltages |= host->voltages;
|
|
|
|
cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
|
|
|
|
/* Since Host Controller Version3.0 */
|
|
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
|
|
if (!(caps & SDHCI_CAN_DO_8BIT))
|
|
cfg->host_caps &= ~MMC_MODE_8BIT;
|
|
}
|
|
|
|
if (host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE) {
|
|
cfg->host_caps &= ~MMC_MODE_HS;
|
|
cfg->host_caps &= ~MMC_MODE_HS_52MHz;
|
|
}
|
|
|
|
if (!(cfg->voltages & MMC_VDD_165_195))
|
|
caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
|
|
SDHCI_SUPPORT_DDR50);
|
|
|
|
if (caps_1 & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
|
|
SDHCI_SUPPORT_DDR50))
|
|
cfg->host_caps |= MMC_CAP(UHS_SDR12) | MMC_CAP(UHS_SDR25);
|
|
|
|
if (caps_1 & SDHCI_SUPPORT_SDR104) {
|
|
cfg->host_caps |= MMC_CAP(UHS_SDR104) | MMC_CAP(UHS_SDR50);
|
|
/*
|
|
* SD3.0: SDR104 is supported so (for eMMC) the caps2
|
|
* field can be promoted to support HS200.
|
|
*/
|
|
cfg->host_caps |= MMC_CAP(MMC_HS_200);
|
|
} else if (caps_1 & SDHCI_SUPPORT_SDR50) {
|
|
cfg->host_caps |= MMC_CAP(UHS_SDR50);
|
|
}
|
|
|
|
if (caps_1 & SDHCI_SUPPORT_DDR50)
|
|
cfg->host_caps |= MMC_CAP(UHS_DDR50);
|
|
|
|
if (host->host_caps)
|
|
cfg->host_caps |= host->host_caps;
|
|
|
|
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BLK
|
|
int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg)
|
|
{
|
|
return mmc_bind(dev, mmc, cfg);
|
|
}
|
|
#else
|
|
int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min)
|
|
{
|
|
int ret;
|
|
|
|
ret = sdhci_setup_cfg(&host->cfg, host, f_max, f_min);
|
|
if (ret)
|
|
return ret;
|
|
|
|
host->mmc = mmc_create(&host->cfg, host);
|
|
if (host->mmc == NULL) {
|
|
printf("%s: mmc create fail!\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|